Chen Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chen Chen has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Alex Q. Huang
University of Texas at Austin
6 shared publications - Mafu Zhang
Semiconductor Power Electronics Center, The University of Texas at Austin, Austin, TX, USA
4 shared publications - Cheolhwan Kim
University of Texas at Austin
2 shared publications - Huanghaohe Zou
Semiconductor Power Electronics Center, The University of Texas at Austin, Austin, TX, USA
2 shared publications - Saleh Farzamkia
Semiconductor Power Electronics Center, The University of Texas at Austin, Austin, TX, USA
2 shared publications - Binhong Cao
Department of Electrical Engineering, Arizona State University, Tempe, AZ, USA
1 shared publication
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (9) , 13215-13225
Comprehensive Analysis of an Isolated Boost Converter Based on the Converter PWM Switch (CPS) Concept
A new pulse width modulation (PWM) switch concept, referred to as the converter PWM switch (CPS), has recently been introduced in the literature. Unlike traditional semiconductor switches, the CPS employs a power converter as a controllable PWM switch while maintaining the power-transfer capability. By replacing one of the semiconductor switches in a traditional boost converter with an isolated CPS, a new CPS-based isolated boost converter (CPS-IBC) is created, which can achieve zero voltage switching (ZVS), a wide voltage conversion range and high efficiency. This article presents the first comprehensive analysis of the ZVS conditions for the proposed CPS-IBC and introduces a rms current estimation method, both of which enhance the understanding and practical implementation of CPS-based converters. Building upon these analyses, an improved modulation scheme is proposed to reduce conduction losses and further enhance the overall efficiency of the CPS-IBC. A 10 kW CPS-IBC prototype is developed to validate the topology and demonstrate the benefits of the proposed modulation. The experimental results highlight the strong potential of the CPS-IBC for high-performance isolated power conversion applications.
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 73 (9) , 13215-13225
Comprehensive Analysis of an Isolated Boost Converter Based on the Converter PWM Switch (CPS) Concept
A new pulse width modulation (PWM) switch concept, referred to as the converter PWM switch (CPS), has recently been introduced in the literature. Unlike traditional semiconductor switches, the CPS employs a power converter as a controllable PWM switch while maintaining the power-transfer capability. By replacing one of the semiconductor switches in a traditional boost converter with an isolated CPS, a new CPS-based isolated boost converter (CPS-IBC) is created, which can achieve zero voltage switching (ZVS), a wide voltage conversion range and high efficiency. This article presents the first comprehensive analysis of the ZVS conditions for the proposed CPS-IBC and introduces a rms current estimation method, both of which enhance the understanding and practical implementation of CPS-based converters. Building upon these analyses, an improved modulation scheme is proposed to reduce conduction losses and further enhance the overall efficiency of the CPS-IBC. A 10 kW CPS-IBC prototype is developed to validate the topology and demonstrate the benefits of the proposed modulation. The experimental results highlight the strong potential of the CPS-IBC for high-performance isolated power conversion applications.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-12
Single-Stage Three-Phase AC-DC DAB Converter With Y-Connected Transformer Winding
Three-phase single-stage AC-DC dual-active-bridge (DAB)-type converters are attractive isolated power-factor-correction (PFC) solutions for grid-tied battery charging applications requiring galvanic isolation and high efficiency. However, existing converters of this type often suffer from a high device count and complex modulation and control. To address these issues, this paper proposes an AC-DC YAB converter that employs an AC-side Y-connected winding to reshape the winding current. Compared with the conventional AC-DC DAB converter, the proposed topology reduces the device count and control complexity while maintaining comparable efficiency. A numerical steady-state model is developed to analyze the proposed converter. Comparative results show that, under uncompensated DC-side sinusoidal phase shift (Sin-PS) modulation, the proposed converter achieves lower current total harmonic distortion (THD) and reduced current stress than the conventional AC-DC DAB converter. A 100 kHz, 6 kW prototype for 480 V$_\rm{AC}$ to 200–300 V$_\rm{DC}$ operation is built to validate the proposed converter, and experimental results demonstrate a peak efficiency of 97.1%.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. PP (00939994) , 1-12
Single-Stage Three-Phase AC-DC DAB Converter With Y-Connected Transformer Winding
Three-phase single-stage AC-DC dual-active-bridge (DAB)-type converters are attractive isolated power-factor-correction (PFC) solutions for grid-tied battery charging applications requiring galvanic isolation and high efficiency. However, existing converters of this type often suffer from a high device count and complex modulation and control. To address these issues, this paper proposes an AC-DC YAB converter that employs an AC-side Y-connected winding to reshape the winding current. Compared with the conventional AC-DC DAB converter, the proposed topology reduces the device count and control complexity while maintaining comparable efficiency. A numerical steady-state model is developed to analyze the proposed converter. Comparative results show that, under uncompensated DC-side sinusoidal phase shift (Sin-PS) modulation, the proposed converter achieves lower current total harmonic distortion (THD) and reduced current stress than the conventional AC-DC DAB converter. A 100 kHz, 6 kW prototype for 480 V$_\rm{AC}$ to 200–300 V$_\rm{DC}$ operation is built to validate the proposed converter, and experimental results demonstrate a peak efficiency of 97.1%.
- 7 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15755-15769
CPS-SST: A Single-Stage AC–DC Solid-State Transformer Based on the Converter PWM Switch Concept
This paper proposes a new single-stage topology for medium-voltage AC (MVAC) to low-voltage DC (LVDC) solid-state transformers (SSTs) based on the recently introduced Converter PWM Switch (CPS) concept and the input-series output-parallel (ISOP) architecture. The proposed CPS-SST features a wide ZVS range, low turn-off loss, high efficiency, a reduced number of active switches, and simple PWM control. A module-rotation multilevel modulation strategy is introduced to reduce the required inductance value, while ensuring balanced power sharing among modules in the CPS-SST. The ZVS performance and turn-off current characteristics are analyzed in detail, and a comprehensive loss model is presented and compared with that of a conventional two-stage ISOP SST. A 10 kW CPS-SST module is constructed and experimentally validated, achieving a peak efficiency of 98% at 5.8-kW. The experimental results closely match the analytical predictions, confirming the strong potential of the proposed topology for MV power conversion applications.
- 7 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15755-15769
CPS-SST: A Single-Stage AC–DC Solid-State Transformer Based on the Converter PWM Switch Concept
This paper proposes a new single-stage topology for medium-voltage AC (MVAC) to low-voltage DC (LVDC) solid-state transformers (SSTs) based on the recently introduced Converter PWM Switch (CPS) concept and the input-series output-parallel (ISOP) architecture. The proposed CPS-SST features a wide ZVS range, low turn-off loss, high efficiency, a reduced number of active switches, and simple PWM control. A module-rotation multilevel modulation strategy is introduced to reduce the required inductance value, while ensuring balanced power sharing among modules in the CPS-SST. The ZVS performance and turn-off current characteristics are analyzed in detail, and a comprehensive loss model is presented and compared with that of a conventional two-stage ISOP SST. A 10 kW CPS-SST module is constructed and experimentally validated, achieving a peak efficiency of 98% at 5.8-kW. The experimental results closely match the analytical predictions, confirming the strong potential of the proposed topology for MV power conversion applications.
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15549-15564
A Decoupled Phase-Shift-Compensation ZVS Modulation Method for Three-Phase AC–DC DAB Converters With High-Frequency-Coupling Structure
The single-stage isolated power factor correction (PFC) AC-DC DAB converters have gained increasing attention for battery-charging applications, including electric vehicle (EV) chargers and battery energy storage systems (BESSs). Controlled through phase-shift modulation, their zero-voltage-switching (ZVS) performance is tightly coupled with other system parameters such as power, current stress, and total harmonic distortion (THD). This strong coupling complicates the modulation design when comprehensively targeting PFC, ZVS, low conduction current, and low THD. This paper proposes a common-mode phase-shift compensation (CMPSC)-based ZVS modulation method for a modified AC-DC DAB converter, in which the ZVS enhancement is decoupled from other system parameters, enabling a simpler approach to improve ZVS performance on the DC side. Two circuit implementations and two modulation strategies are presented. The proposed constant CMPSC (Const-CMPSC) and optimal CMPSC (Opt-CMPSC) methods are implemented on a prototype EV charger and compared with a baseline sinusoidal phase-shift (Sin-PS) method. Experimental results show that the peak efficiency is improved by 0.3% with the CMPSC method and by 0.6% with the Opt-CMPSC method. The light-load efficiency is further enhanced by more than 1.3% using Opt-CMPSC.
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (9) , 15549-15564
A Decoupled Phase-Shift-Compensation ZVS Modulation Method for Three-Phase AC–DC DAB Converters With High-Frequency-Coupling Structure
The single-stage isolated power factor correction (PFC) AC-DC DAB converters have gained increasing attention for battery-charging applications, including electric vehicle (EV) chargers and battery energy storage systems (BESSs). Controlled through phase-shift modulation, their zero-voltage-switching (ZVS) performance is tightly coupled with other system parameters such as power, current stress, and total harmonic distortion (THD). This strong coupling complicates the modulation design when comprehensively targeting PFC, ZVS, low conduction current, and low THD. This paper proposes a common-mode phase-shift compensation (CMPSC)-based ZVS modulation method for a modified AC-DC DAB converter, in which the ZVS enhancement is decoupled from other system parameters, enabling a simpler approach to improve ZVS performance on the DC side. Two circuit implementations and two modulation strategies are presented. The proposed constant CMPSC (Const-CMPSC) and optimal CMPSC (Opt-CMPSC) methods are implemented on a prototype EV charger and compared with a baseline sinusoidal phase-shift (Sin-PS) method. Experimental results show that the peak efficiency is improved by 0.3% with the CMPSC method and by 0.6% with the Opt-CMPSC method. The light-load efficiency is further enhanced by more than 1.3% using Opt-CMPSC.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (6) , 9422-9436
A Review of High-Power Medium-Frequency Transformers in Medium-Voltage Power Electronics: State of the Art, Challenges, and Solutions
Medium-frequency transformers (MFTs) have emerged as a key enabling technology in medium-voltage (MV) power electronics systems, supporting applications such as solid-state transformers, power electronic traction transformers, and medium-voltage direct current power distribution. This review provides a comprehensive overview of high-power MFTs, focusing on their state of the art, applications, technical challenges, and current research solutions. This article surveys key considerations, including core materials, core shapes, winding technologies, winding structures, insulation considerations, dielectric materials, electric field stress grading materials, and cooling technologies. Specifically targeted at modern MV power electronics, this article discusses the challenges and solutions in MFT insulation design and test. The topics include complex voltage stress and electric field distribution, partial discharge under medium-frequency high dv/dt waveforms, and insulation test standards, which are critical to enhance the performance, reliability, and development of high-power MFTs in MV applications.
- 16 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (6) , 9422-9436
A Review of High-Power Medium-Frequency Transformers in Medium-Voltage Power Electronics: State of the Art, Challenges, and Solutions
Medium-frequency transformers (MFTs) have emerged as a key enabling technology in medium-voltage (MV) power electronics systems, supporting applications such as solid-state transformers, power electronic traction transformers, and medium-voltage direct current power distribution. This review provides a comprehensive overview of high-power MFTs, focusing on their state of the art, applications, technical challenges, and current research solutions. This article surveys key considerations, including core materials, core shapes, winding technologies, winding structures, insulation considerations, dielectric materials, electric field stress grading materials, and cooling technologies. Specifically targeted at modern MV power electronics, this article discusses the challenges and solutions in MFT insulation design and test. The topics include complex voltage stress and electric field distribution, partial discharge under medium-frequency high dv/dt waveforms, and insulation test standards, which are critical to enhance the performance, reliability, and development of high-power MFTs in MV applications.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 185-189
Converter PWM Switch (CPS): A New PWM Switch Concept
Pulse-width modulation (PWM) is a foundational concept in modern power electronics, typically realized by the high-frequency switching of power semiconductor devices, such as metal-oxide-semiconductor field-effect transistors (MOSFETs) or insulated-gate bipolar transistors (IGBTs), with controlled duty cycles. This letter introduces a fundamentally new PWM switch concept: the Converter PWM Switch (CPS). Unlike traditional PWM switches, the CPS employs one port of a converter to perform the function of a PWM switch, while its additional ports serve to source or sink power, enabling a new class of converter topologies, referred to as CPS-based converters. In this letter, the definition and derivation of the proposed CPS are discussed in detail. To show the advantages of this concept, a CPS-based isolated boost converter is presented with high efficiency, wide voltage conversion range, and straightforward control, demonstrating the capability of the CPS and the superior performance of the new topologies it enables.
- 3 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 41 (1) , 185-189
Converter PWM Switch (CPS): A New PWM Switch Concept
Pulse-width modulation (PWM) is a foundational concept in modern power electronics, typically realized by the high-frequency switching of power semiconductor devices, such as metal-oxide-semiconductor field-effect transistors (MOSFETs) or insulated-gate bipolar transistors (IGBTs), with controlled duty cycles. This letter introduces a fundamentally new PWM switch concept: the Converter PWM Switch (CPS). Unlike traditional PWM switches, the CPS employs one port of a converter to perform the function of a PWM switch, while its additional ports serve to source or sink power, enabling a new class of converter topologies, referred to as CPS-based converters. In this letter, the definition and derivation of the proposed CPS are discussed in detail. To show the advantages of this concept, a CPS-based isolated boost converter is presented with high efficiency, wide voltage conversion range, and straightforward control, demonstrating the capability of the CPS and the superior performance of the new topologies it enables.