JRJames D. Randall

James D. Randall

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


James D. Randall has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Redox‐Active Verdazyl Radical Polymers via Postpolymerization Modification of Active Ester Polymers

    by Theo A. Ellingsen, James D. Randall, Bhagya Dharmasiri, Wesley J. Olivier, Luke C. Henderson, Melissa K. Stanfield, Stuart C. Thickett, Rebecca O. Fuller

    Organic radical polymers (ORPs) are constructed with 1,5‐dimethyl‐6‐oxoverdazyl radicals for assessment as redox‐active materials. The ORPs were synthesized through the postpolymerization modification (PPM) of poly(pentafluorophenyl methacrylate) ( P1 ) and poly(pentafluorophenyl acrylate) ( P2 ) with either 1,5‐dimethyl‐3‐( p‐ aniline)‐6‐oxoverdazyl ( 1 ), 1,5‐dimethyl‐3‐(4‐methylamine‐(1,1ʹ‐biphenyl))‐6‐oxoverdazyl ( 2 ) or 1,5‐dimethyl‐3‐(4‐methylamine‐(1,1ʹ‐biphenyl))‐6‐oxoverdazyl (3). To overcome the limited stability of 1 , radicals containing bulky C 3 substituents and alkyl spacers to the heteroatom of the 4‐methylamine or 4‐hydroxymethyl moiety were synthesized from high yielding (78%–98%) Suzuki–Miyaura cross‐couplings. The large cell potential (E° cell ( 3 ) = 1.67 V) and radical stability ensure these are well suited to fundamental electrochemical proof of concept studies when incorporated into a polymer. Variable radical attachment (0%–75%) was observed in PPM reactions. The ester aminolysis of P2 yielded the highest radical containing polymer ( P2‐2 ; 75%). As a proof‐of‐concept electrochemical demonstration, P2‐2 and P2‐3 exhibited a reversible redox couple at 3.43 V (vs. Li/Li + ), successfully validating the redox activity of the verdazyl‐functionalized polymers in a coin cell.

  • Open Access

    Mechanical and optical effects of laser-induced periodic surface structures (LIPSS) on carbon fibres and composites

    by Christian Strohl, Johannes Bauer, Johannes Baur, Y Athulya Wickramasingha, James D Randall, David J Hayne, Bhagya Dharmasiri, Luke C Henderson, Ben Newman

    Laser-induced periodic surface structures (LIPSS) have been employed extensively across many fields of materials surface engineering. LIPSS have previously been demonstrated on carbon fibre materials in literature, yet the impact these treatments have on the mechanical properties of the fibres and their resulting composite materials has remained unreported. Herein, carbon fibres were exposed to ultrashort-pulsed laser irradiation to generate both low spatial frequency and high spatial frequency LIPSS. The resulting surface features were characterised by scanning electron microscopy and evaluated mechanically at both the single-fibre and laminate scales. Laser treatment produced distinct structural colouration and darkening effects that were retained after incorporation into an epoxy matrix. Single-fibre tensile strength decreased by 30.3%–52.5%, while tensile modulus was largely retained. Despite this, composite laminates exhibited no significant loss in flexural strength and only a 10.3% reduction in flexural modulus.

  • Open Access

    Partially carbonised carbon fibres as improved electrodes for structural battery applications

    by Ruben Tavano, James D. Randall, Nguyen Nguyen Le Thao, Claudia Creighton, Johanna Xu, Luke C. Henderson, Leif E. Asp

    Carbon fibres are promising materials for structural battery anodes because they can simultaneously provide mechanical reinforcement and act as the electrochemically active material. Their performance depends strongly on their internal structure, which is influenced by the temperature used during carbonisation. Here, we show that partially carbonised carbon fibres produced at different maximum carbonisation temperatures (800 °C to 1100 °C) display systematic changes in both mechanical and electrochemical behaviour. Mechanical testing shows that increasing the carbonisation temperature leads to higher stiffness and tensile strength. Electrochemical measurements reveal a similar trend, with higher reversible capacity and improved cycling stability at higher temperatures. Thus, results show that the general antagonistic dependence on carbonisation temperature observed for conventional carbon fibres is not found for partially carbonised fibres. The partially carbonised fibres show up to 40 percent better electrochemical performance than conventional intermediate modulus carbon fibres. These results highlight the potential in the use of partially carbonised carbon fibres for next-generation structural battery composites, allowing for an expanded multifunctional design window.


  • Influence of Surface Chemistry on Carbon Fiber Structural Battery Anodes

    by Muhammad Aqeel, Bhagya Dharmasiri, Ruben Tavano, Elmer Austria, Behnam Akhavan, Leif E. Asp, Luke C. Henderson, James D. Randall

    Carbon fiber (CF) electrodes offer a promising route to enhance both mechanical and electrochemical performance in multifunctional structural batteries for future technologies such as electric vehicles, next‐generation aircraft, and autonomous satellites. Recent developments have focused on solid battery electrolytes that deliver both ionic conductivity and mechanical strength. Central to this is the CF interface, which plays a dual role in structural reinforcement and charge storage. While interfacial chemistry is well studied in composites, its impact on the anode performance of CFs tailored for mechanical performance remains unclear. This article explores how CF surface chemistry influences electrochemical battery performance, by grafting functional groups known to improve composite adhesion (NO 2 , NH 2 , SH, SO 3 H). Surface modifications are confirmed using scanning electron microscopy, Raman spectroscopy, and X‐ray photoelectron spectroscopy. Untreated CFs delivered an initial capacity of 189.1 ± 42.6 mAh g −1 , while SH‐ and NO 2 ‐functionalized CFs achieved enhanced capacities of 244.0 ± 12.1 and 243.8 ± 64.1 mAh g −1 , respectively. These results suggest that chemical surface modification—while originally intended for composite performance—may also improve the anode performance in structural battery systems.