Cedric Goossens
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Cedric Goossens has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Filip J. R. Meysman
University of Antwerp
10 shared publications - Sebastiaan J. van de Velde
Department of Marine Science, University of Otago, Ōtepoti Dunedin, 9016, Aotearoa New Zealand
7 shared publications - Steven Bouillon
Division of Soil and Water Management, Katholieke Universiteit Leuven, Heverlee, 3001, Belgium
5 shared publications - Astrid Hylén
Geobiology Research Group, Department of Biology, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk, Belgium
3 shared publications - Benjamin Van Heurck
Geobiology Research Group, Department of Biology, University of Antwerp, Universiteitsplein 1, 2610 Wilrijk, Belgium
3 shared publications - Daniel Alexander Frick
Institute of Geosciences, Christian-Albrechts-University Kiel, Ludewig-Meyn-Str. 10, 24118 Kiel, Germany
3 shared publications
Latest Publications
- Open Access
- 8 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-50
Comment on egusphere-2026-5968
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- 8 November 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-50
Open AccessComment on egusphere-2026-5968
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- Open Access
- 29 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-50
Comment on egusphere-2026-5968
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- 29 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-50
Open AccessComment on egusphere-2026-5968
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- Open Access
- 8 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-50
Alkalinity generation and trace metal dynamics during olivine-based marine enhanced rock weathering in bioturbated sediments
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- 8 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-50
Open AccessAlkalinity generation and trace metal dynamics during olivine-based marine enhanced rock weathering in bioturbated sediments
Ocean alkalinity enhancement (OAE) via marine enhanced rock weathering (mERW) of olivine is a proposed strategy for atmospheric carbon dioxide removal (CDR). However, the potential co-release of trace metals to marine ecosystems, most notably nickel (Ni) and chromium (Cr), raises environmental concerns. Here, we investigated total alkalinity (AT) release, trace metal dynamics and metal bioaccumulation during mERW using two complementary approaches. First, a 28-day microcosm experiment showed that bioturbation by the lugworm Arenicola marina in pure olivine sand enhanced AT release nearly fivefold and more than doubled the release of dissolved Ni (DNi). Second, in a long-term (> 1 year) mesocosm experiment, we added fine-grained olivine at sediment loading levels of 6% and 10%, and coarse-grained olivine at 10%, to natural intertidal sediments inhabited by A. marina. We quantified sediment–water fluxes and porewater concentrations of AT, DNi, and DCr, and assessed metal accumulation in lugworm tissues. Olivine amendment increased sediment–water AT fluxes approximately two- to threefold, without significant effects of grain size or loading level. Fine-grained olivine treatments resulted in the highest DNi fluxes and the greatest Ni bioaccumulation in lugworms. Lugworm Ni concentrations increased up to tenfold relative to controls. In contrast, olivine amendment did not increase DCr fluxes and Cr bioaccumulation was minor compared to Ni. These results show that bioturbation can enhance olivine weathering and that olivine amendment can increase AT release from natural coastal sediments. However, finer grain size disproportionately increased Ni release and bioaccumulation without a detectable additional AT benefit. This decoupling suggests that AT generated by olivine weathering may have been partly offset by suppression of natural sedimentary AT generation. Under the conditions tested here, coarse olivine therefore provided a more favourable balance between net AT release and ecotoxicological risks from Ni exposure during mERW.
- Open Access
- 17 September 2026
- Published by Copernicus GmbH in Biogeosciences
- Vol. 23 (18) , 6447-6464
Towards circularity in shellfish aquaculture: stimulating mussel shell dissolution in marine sediments
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO 2 ) removal strategy, and novel approaches to increase the total alkalinity ( A T ) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes A T , thus leading to CO 2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO 2 emissions. Here, we investigate how the CO 2 footprint of shellfish aquaculture can be reduced by using bivalve shells as a resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO 3 ) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces A T that could then compensate the CO 2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (∼ 8 wt %), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO 3 dissolution rates ( R diss = 0.9 ± 0.5 mmolm-2d-1) and A T fluxes ( F AT = 3.2 ± 1.1 mmolm-2d-1). In contrast, shell-amended sediments showed markedly higher R diss and F AT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted, most likely by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum R diss of 22.7 ± 2.6 mmolm-2d-1 after 9 weeks, corresponding to a measured F AT of 43.0 ± 6.0 mmolm-2d-1. After that, CaCO 3 dissolution rates declined as organic matter availability decreased, approaching control rates, with a slightly elevated R diss of 2.2 ± 1.1 mmolm-2d-1 at the end of the experiment. After 24 weeks, ∼ 6 % of the initial shell mass had dissolved, and extrapolation of the dissolution rate at the end of the experiment suggests that complete dissolution would require ∼ 38 years. Our results suggest that organic matter availability limits CaCO 3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 17 September 2026
- Published by Copernicus GmbH in Biogeosciences
- Vol. 23 (18) , 6447-6464
Open AccessTowards circularity in shellfish aquaculture: stimulating mussel shell dissolution in marine sediments
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO 2 ) removal strategy, and novel approaches to increase the total alkalinity ( A T ) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes A T , thus leading to CO 2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO 2 emissions. Here, we investigate how the CO 2 footprint of shellfish aquaculture can be reduced by using bivalve shells as a resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO 3 ) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces A T that could then compensate the CO 2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (∼ 8 wt %), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO 3 dissolution rates ( R diss = 0.9 ± 0.5 mmolm-2d-1) and A T fluxes ( F AT = 3.2 ± 1.1 mmolm-2d-1). In contrast, shell-amended sediments showed markedly higher R diss and F AT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted, most likely by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum R diss of 22.7 ± 2.6 mmolm-2d-1 after 9 weeks, corresponding to a measured F AT of 43.0 ± 6.0 mmolm-2d-1. After that, CaCO 3 dissolution rates declined as organic matter availability decreased, approaching control rates, with a slightly elevated R diss of 2.2 ± 1.1 mmolm-2d-1 at the end of the experiment. After 24 weeks, ∼ 6 % of the initial shell mass had dissolved, and extrapolation of the dissolution rate at the end of the experiment suggests that complete dissolution would require ∼ 38 years. Our results suggest that organic matter availability limits CaCO 3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Reply on RC2
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Open AccessReply on RC2
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Reply on RC1
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Open AccessReply on RC1
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Reply on RC3
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 23 July 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Open AccessReply on RC3
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 22 June 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Comment on egusphere-2026-2930
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 22 June 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-26
Open AccessComment on egusphere-2026-2930
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 1 June 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-26
Toward shellfish aquaculture circularity: stimulating mussel shell dissolution in marine sediments
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- 1 June 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-26
Open AccessToward shellfish aquaculture circularity: stimulating mussel shell dissolution in marine sediments
Ocean alkalinity enhancement (OAE) is receiving considerable attention as a carbon dioxide (CO2) removal strategy, and novel approaches to increase the total alkalinity (AT) of the surface ocean are being explored. In bivalve aquaculture, calcification during shell growth consumes AT, thus leading to CO2 emissions. After consumption, shells are typically landfilled or incinerated, which can generate additional CO2 emissions. Here, we investigate whether bivalve shells could be a potential resource for mineral-based OAE. The idea is to grind the calcium carbonate (CaCO3) shells to increase the reactive surface area and distribute them into permeable, oxygen-rich sediments, where their dissolution produces AT that could then compensate the CO2 emitted during calcification. To evaluate this concept, we conducted microcosm incubations of sediments amended with crushed mussel shells (~8 wt%), and monitored the sediment geochemistry and sediment-water exchange over 24 weeks. Control sediments exhibited low and constant CaCO3 dissolution rates (Rdiss = 0.9 ± 0.5 mmol m-2 d-1) and AT fluxes (FAT = 3.2 ± 1.1 mmol m-2 d-1). In contrast, shell-amended sediments showed markedly higher Rdiss and FAT values, which exhibited a transient response modulated by oxygen and organic matter availability. Initially, shell dissolution was restricted by oxygen availability due to the intense mineralization of shell-associated organic matter. Subsequently, following gradual sediment reoxygenation, dissolution rates increased, reaching a maximum Rdiss of 22.7 ± 2.6 mmol m-2 d-1 after 9 weeks, corresponding to a measured FAT of 43.0 ± 6.0 mmol m-2 d-1. After that, CaCO3 dissolution rates declined as organic matter availability decreased, thus reducing dissolution toward a constant steady-state Rdiss of 2.2 ± 1.1 mmol m-2 d-1. After 6 months, ~6 % of the initial shell mass had dissolved, and extrapolation of the new quasi-steady-state dissolution rate at the end of the experiment suggests that complete dissolution would take ~38 years. Our results suggest that organic matter availability limits CaCO3 dissolution in the permeable sediment investigated. This constraint, however, can be alleviated by targeting environments with high organic matter deposition for in-situ applications, such as sediments beneath mussel farms, thereby promoting mussel aquaculture circularity.
- Open Access
- 1 June 2026
- Published by Copernicus GmbH
Supplementary material to "Toward shellfish aquaculture circularity: stimulating mussel shell dissolution in marine sediments"
- 1 June 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Toward shellfish aquaculture circularity: stimulating mussel shell dissolution in marine sediments"