RQRodrigo Vilaça De Queiroz

Rodrigo Vilaça De Queiroz

*This is an algorithmically generated author record based on publicly available information.

Rodrigo Vilaça De Queiroz has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Surface Treatment of Flexible Barrier Film for Improved Stability of Organic Photovoltaic Mini Modules

    by Clara L.E Silva, Bárbara H.S. Miranda, Maria L. Vilela, Jair F. Rodrigues, Thainá G. Cunha, Jhonatan A. Dias, Gabriela A. Soares, Vinicius Freitas, Rodrigo de Q. Vilaça, Luana Wouk, et al.

    The lifetime and stability of organic photovoltaics (OPVs) are the key factors that influence the technology used to scale up and commercialize OPVs. High-performing and reliable devices are used to fabricate the devices of choice. Materials and methods that can be used to prevent the degradation of organic materials, enabling better OPV applications, are being increasingly researched in recent years. Herein, we present the surface modification process of a commercial, flexible barrier film based on polyethylene terephthalate (PET). A sol-gel deposition method was used to modify the surface. Two scalable coating techniques, spray- and bar-coating, were investigated as the processing methods. Treated films were optically, morphologically, and topologically characterized. The modification of the barrier film surface increased the surface hydrophobicity of the bar-coated and spray-coated treated films. This was validated by the contact angle measurements. OPV roll-to-roll (R2R) mini-modules with 4.2% power conversion efficiency were fabricated and encapsulated with the treated films. The lifetime and stability were assessed by conducting accelerated aging tests based on the ISOS-D-3 protocol. The spray-coating technique provided a more stable layer than the bar-coating technique, and the lifetime of the OPV modules encapsulated in spray-coated treated barrier films was increased. Surface modification has been demonstrated to be a promising approach for not only improving the barrier film properties (resulting in the improved lifetimes of the modules) but also reducing the extents of reflectance losses in the OPV modules post encapsulation.

  • Open Access

    CARACTERIZAÇÃO DE MÓDULOS FOTOVOLTAICOS ORGÂNICOS COMERCIAIS

    by Janis Bezerra Galdino, Olga de Castro Vilela, Naum Fraidenraich, Rodrigo Vilaça De Queiroz

    Os módulos fotovoltaicos orgânicos (OPV) vem apresentando um crescente desenvolvimento devido ao seu potencial de baixo custo e a possibilidade de aplicações comerciais que oferecem por serem leves, semitransparentes e flexíveis. O método de fabricação roll-to-roll possibilita a fabricação em larga escala e com um menor consumo de energia em relação às tecnologias fotovoltaicas convencionais. Porém, para que as células OPV se popularizem no mercado fotovoltaico, é preciso melhorar a eficiência e o tempo de vida dos módulos OPV. Atualmente, a eficiência de um módulo comercial está em torno de 2 a 6 %. Neste trabalho, diferentes tipos de módulos comerciais OPV foram analisados de acordo com o material que compõe a camada ativa e o tamanho da célula fotovoltaica. Os dois materiais estudados foram o P3HT:PCBM e um outro polímero, que por motivos de sigilo industrial, é referido no texto como molécula azul. Curvas características foram obtidas para avaliar os módulos OPV e o comportamento de um dos módulos funcionando continuamente por dois dias em tensão fixa foi analisado. Foi observado que a molécula azul apresenta um melhor desempenho que a de P3HT:PCBM, com melhores eficiências e melhor processamento em grandes dimensões. Além disso, foi constatado que o tamanho das células influencia fortemente na sua performance. O módulo de P3HT:PCBM com a maior célula foi o que obteve o pior desempenho (eficiência em torno de 1,75% para 1000 W/m²), por possuir uma quantidade maior de erros relacionados à não uniformidade no processo de fabricação. Adicionalmente, o módulo de molécula azul de menor célula apresenta a maior eficiência (aproximadamente 4% para 100 W/m²). Nos ensaios de tensão fixa, observou-se que a eficiência do módulo analisado se manteve em um valor alto (em comparação com as eficiências nos testes de curva características outdoor e indoor) ao longo de sua operação.

  • Open Access

    LIFETIME STUDY OF ORGANIC PHOTOVOLTAIC MATERIALS THROUGH OUTDOOR TESTS

    by Gabriela De Amorim Soares, Andres Sousa Galindo, Mathieu Chabanel, Anderson Lima, Rodrigo Vilaça De Queiroz, Diego Bagnis

    Organic photovoltaics (OPV) have undergone a significant development in recent years, with companies reaching efficiencies above 13%. Its unique features of transparency, light weight and flexibility allow the OPV application where conventional photovoltaics reach their limits, such as building integrated photovoltaics (BIPV). Many projects are emerging for this type of application, such as façade integration, and it is important to guarantee that the lifetime of the OPV devices is similar to what it is being integrated to. As a relatively recent technology, there are not many studies focusing on the stability and lifetime of OPV and even though standard tests have been defined for means of comparison of technology development, there are no appropriate qualification tests to assure the durability of the modules. As accelerated tests are not yet correlated to real operational conditions either, outdoor tests are a must to study degradation behaviors and pathways to improve the lifetime. In this paper, outdoor tests have been conducted for a period over a year to compare different photoactive materials and assess their stability under operational conditions. By the use of an in-house built software, the current-voltage measurements performed along the day hours were used to build degradation curves and model the energy generated over time. Differences in degradation rate were observed for the three polymers tested, as well as a relation between irradiation levels and the performance and stability of the devices.


  • Open Access

    TOP ELECTRODE INVESTIGATION OF OPV MODULES BASED ON P3HT:PC[60]BM FABRICATED VIA ROLL-TO-ROLL PROCESS

    by Bárbara Hellen de Souza Miranda, Jair Francisco Rodrigues, Rodrigo Vilaça De Queiroz, Diego Bagnis

    Solar photovoltaic (PV) cells allow the direct conversion of sunlight into electricity without CO2 emission. Finding a way to cheaply utilize the vast amount of solar energy is one of the biggest challenges for this technology. The organic photovoltaic cells (OPV) are based on solution-processed photoactive polymers and can be fabricated via roll-to-roll (R2R) processes, which allow high production throughput with low costs. CSEM Brasil is building the foundations of future high-tech industries in Brazil and one of our key technology development areas is OPV modules production using R2R coating. In this work, polymer solar cells based on P3HT: PC[60]BM were prepared by R2R coating (electron transport, active and hole transport layers – ETL, AL and HTL) and by screen printing (top silver electrode). In order to save material and give more transparency of the OPV module were compared and evaluated the performance of two different suppliers of Ag paste (A and B) in three different top contact configurations, solid, grid and honeycomb. Additionally, were compared two different screen suppliers (I and II) for screen printing process and the Ag paste drying time studied. The comparisons were made with modules with an active area of 21.6 cm2 (6 stripes serially connected). Photovoltaic performance was evaluated in terms of Ag paste and screens suppliers, Ag pattern and drying time. Finally, modules were encapsulated in a R2R laminator using a flexible barrier film and evaluated in terms of lifetime.