Jinwoo Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jinwoo Kim has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Gwan-Hyoung Lee
Seoul National University
5 shared publications - Miyoung Kim
Department of Materials Science and Engineering Seoul National University Seoul Republic of Korea
3 shared publications Changheon Kim
Institute of Advanced Composite Materials Korea Institute of Science and Technology (KIST) Jeonbuk Republic of Korea
2 shared publications- Hyeong Seok Lee
Seoul National University
2 shared publications - Ingyu Yoo
Department of Material Science and Engineering Seoul National University Seoul South Korea
2 shared publications - Ji-Hwan Baek
Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea
2 shared publications
Latest Publications
- Open Access
Remote Plasma‐Enabled Vertical Asymmetry Engineering of 2D PtSe 2 via Phase‐Preserving Chalcogen Exchange
Vertical asymmetry in two‐dimensional (2D) transition metal dichalcogenides induces intrinsic dipoles, symmetry‐breaking functionalities, and interface‐specific electronic reconstruction. However, existing Janus synthesis processes rely on sequential treatments, high‐temperature substitution, or solid‐phase precursors. These approaches often cause phase transitions, lattice degradation, or defect formation, limiting scalability and device performance. Here, we introduce a remote plasma‐enabled strategy for phase‐preserving vertical asymmetry engineering in 2D Platinum Diselenide (PtSe 2 ) via one‐step chalcogen exchange. Using a single‐reactor H 2 S remote plasma, treatment at near‐room‐temperature (∼50°C) selectively substitutes top‐layer chalcogen atoms, forming Janus PtSSe with preserved crystallinity and minimal lattice perturbation. Increasing the temperature to 200–300°C enables complete conversion to crystalline 2D Platinum Disulfide (PtS 2 ). Janus PtSSe monolayers derived from exfoliated PtSe 2 exhibit an out‐of‐plane dipole and piezoresponse, with enhanced surface‐enhanced Raman scattering relative to corresponding PtSe 2 and PtS 2 monolayers. Extending this approach from monolayers to four‐layer (4L) PtSe 2 grown by metal‐organic chemical vapor deposition, selective sulfurization produces Janus PtSSe/3L‐PtSe 2 heterostructures with improved hydrogen evolution reaction kinetics relative to 4L‐PtSe 2 and fully sulfurized 4L‐PtS 2 . Our results establish remote plasma‐driven chalcogen exchange as a generalizable platform for symmetry‐controlled 2D materials, enabling scalable engineering of vertical polarity, interfacial charge distribution, and functional responses.
Open AccessRemote Plasma‐Enabled Vertical Asymmetry Engineering of 2D PtSe 2 via Phase‐Preserving Chalcogen Exchange
Vertical asymmetry in two‐dimensional (2D) transition metal dichalcogenides induces intrinsic dipoles, symmetry‐breaking functionalities, and interface‐specific electronic reconstruction. However, existing Janus synthesis processes rely on sequential treatments, high‐temperature substitution, or solid‐phase precursors. These approaches often cause phase transitions, lattice degradation, or defect formation, limiting scalability and device performance. Here, we introduce a remote plasma‐enabled strategy for phase‐preserving vertical asymmetry engineering in 2D Platinum Diselenide (PtSe 2 ) via one‐step chalcogen exchange. Using a single‐reactor H 2 S remote plasma, treatment at near‐room‐temperature (∼50°C) selectively substitutes top‐layer chalcogen atoms, forming Janus PtSSe with preserved crystallinity and minimal lattice perturbation. Increasing the temperature to 200–300°C enables complete conversion to crystalline 2D Platinum Disulfide (PtS 2 ). Janus PtSSe monolayers derived from exfoliated PtSe 2 exhibit an out‐of‐plane dipole and piezoresponse, with enhanced surface‐enhanced Raman scattering relative to corresponding PtSe 2 and PtS 2 monolayers. Extending this approach from monolayers to four‐layer (4L) PtSe 2 grown by metal‐organic chemical vapor deposition, selective sulfurization produces Janus PtSSe/3L‐PtSe 2 heterostructures with improved hydrogen evolution reaction kinetics relative to 4L‐PtSe 2 and fully sulfurized 4L‐PtS 2 . Our results establish remote plasma‐driven chalcogen exchange as a generalizable platform for symmetry‐controlled 2D materials, enabling scalable engineering of vertical polarity, interfacial charge distribution, and functional responses.
- Open Access
- 1 April 2026
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 89 (4) , 048005
Visualizing lattice-mismatch-dependent strain relaxation in epitaxially grown MoS 2 /WS 2 and MoS 2 /WSe 2 hetero-bilayers
Strain relaxation at lattice-mismatched interfaces is critical for epitaxial growth and high-quality single-crystal films. While van der Waals (vdW) epitaxy is considered as a promising platform due to its high tolerance to lattice mismatch, its actual response to lattice mismatch remains largely unexplored. Here, we investigate the effect of lattice mismatch on vdW interfaces by epitaxially growing MoS 2 on WS 2 or WSe 2 substrate. annular dark-field scanning transmission electron microscopy reveals that MoS 2 /WS 2 with a negligible lattice mismatch of ∼0.22% forms a fully commensurate structure, whereas MoS 2 /WSe 2 with a large lattice mismatch of ∼3.96% exhibits non-uniform moiré patterns, characteristic of an incommensurate interface. Detailed analysis shows that the MoS 2 /WS 2 hetero-bilayers exhibit perfectly aligned structure through compression of MoS 2 , whereas the MoS 2 /WSe 2 hetero-bilayers show elongation and rotation of moiré orientation driven by tensile strain. Notably, even small twist angles induce significant changes in moiré orientation, resulting in bent fringes that are indicative of local rotational distortions. Large lattice mismatch drives localized lattice distortion, where rotation of the MoS 2 lattice emerges as an energetically favorable mechanism for strain release, in contrast to commensurate alignment in small-mismatch systems. Our results establish moiré pattern analysis as a powerful framework for directly visualizing spatially varying strain and its relaxation pathways in vdW hetero-bilayers. Our work reveals previously inaccessible interfacial deformation modes in vdW hetero-bilayers and establishes moiré analysis as a powerful platform for strain engineering in 2D electronic and optoelectronic materials.
- 1 April 2026
- Published by IOP Publishing in Reports on Progress in Physics
- Vol. 89 (4) , 048005
Open AccessVisualizing lattice-mismatch-dependent strain relaxation in epitaxially grown MoS 2 /WS 2 and MoS 2 /WSe 2 hetero-bilayers
Strain relaxation at lattice-mismatched interfaces is critical for epitaxial growth and high-quality single-crystal films. While van der Waals (vdW) epitaxy is considered as a promising platform due to its high tolerance to lattice mismatch, its actual response to lattice mismatch remains largely unexplored. Here, we investigate the effect of lattice mismatch on vdW interfaces by epitaxially growing MoS 2 on WS 2 or WSe 2 substrate. annular dark-field scanning transmission electron microscopy reveals that MoS 2 /WS 2 with a negligible lattice mismatch of ∼0.22% forms a fully commensurate structure, whereas MoS 2 /WSe 2 with a large lattice mismatch of ∼3.96% exhibits non-uniform moiré patterns, characteristic of an incommensurate interface. Detailed analysis shows that the MoS 2 /WS 2 hetero-bilayers exhibit perfectly aligned structure through compression of MoS 2 , whereas the MoS 2 /WSe 2 hetero-bilayers show elongation and rotation of moiré orientation driven by tensile strain. Notably, even small twist angles induce significant changes in moiré orientation, resulting in bent fringes that are indicative of local rotational distortions. Large lattice mismatch drives localized lattice distortion, where rotation of the MoS 2 lattice emerges as an energetically favorable mechanism for strain release, in contrast to commensurate alignment in small-mismatch systems. Our results establish moiré pattern analysis as a powerful framework for directly visualizing spatially varying strain and its relaxation pathways in vdW hetero-bilayers. Our work reveals previously inaccessible interfacial deformation modes in vdW hetero-bilayers and establishes moiré analysis as a powerful platform for strain engineering in 2D electronic and optoelectronic materials.
- 10 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 70217-70225
Unraveling Diverse Stacking Sequence in CVD-Grown WSe 2 Multilayers via Electron Diffraction Polarity
The transition from two-dimensional (2D) to three-dimensional (3D) layered systems has significantly expanded the research landscape for functional materials. Among these, polar layered materials with noncentrosymmetry, such as 3R-MoS2, 3R-WSe2, and In2Se3, are particularly intriguing due to their inherent structural asymmetry, which leads to exceptional properties, such as ferroelectricity, piezoelectricity, and nonlinear optical responses. However, precisely determining the layer-by-layer stacking sequence in multilayer polar materials remains a significant challenge. To address this challenge, we present a methodology that determines stacking sequences through an integrated analysis of multiple scattering signatures from the layered atomic arrangement, particularly the electron diffraction polarity arising from structural asymmetry. We demonstrate its capability in chemical vapor deposition (CVD)-grown WSe2 multilayers, a representative transition metal dichalcogenides (TMDs) with polar noncentrosymmetric stacking and sliding ferroelectricity, accurately identifying diverse stacking scenarios, such as mixed antiparallel and parallel arrangements and complicated structure, such as spiral with stacking faults. Comprehensive validation and comparative analysis by transmission electron microscopy (TEM), Kelvin probe force microscopy (KPFM), and low-frequency Raman spectroscopy confirm the reliability of this diffraction polarity-based technique and its ability to correlate stacking sequence with material properties. This methodology is broadly applicable to layered materials with intrinsically broken inversion symmetry, enabling automatic stacking determination and extending to complex architectures, such as twisted or heterostructural moiré systems. Our method provides a critical tool for probing polar layered materials, which are promising candidates for ferroelectricity, optoelectronics, and spintronics.
- 10 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (51) , 70217-70225
Unraveling Diverse Stacking Sequence in CVD-Grown WSe 2 Multilayers via Electron Diffraction Polarity
The transition from two-dimensional (2D) to three-dimensional (3D) layered systems has significantly expanded the research landscape for functional materials. Among these, polar layered materials with noncentrosymmetry, such as 3R-MoS2, 3R-WSe2, and In2Se3, are particularly intriguing due to their inherent structural asymmetry, which leads to exceptional properties, such as ferroelectricity, piezoelectricity, and nonlinear optical responses. However, precisely determining the layer-by-layer stacking sequence in multilayer polar materials remains a significant challenge. To address this challenge, we present a methodology that determines stacking sequences through an integrated analysis of multiple scattering signatures from the layered atomic arrangement, particularly the electron diffraction polarity arising from structural asymmetry. We demonstrate its capability in chemical vapor deposition (CVD)-grown WSe2 multilayers, a representative transition metal dichalcogenides (TMDs) with polar noncentrosymmetric stacking and sliding ferroelectricity, accurately identifying diverse stacking scenarios, such as mixed antiparallel and parallel arrangements and complicated structure, such as spiral with stacking faults. Comprehensive validation and comparative analysis by transmission electron microscopy (TEM), Kelvin probe force microscopy (KPFM), and low-frequency Raman spectroscopy confirm the reliability of this diffraction polarity-based technique and its ability to correlate stacking sequence with material properties. This methodology is broadly applicable to layered materials with intrinsically broken inversion symmetry, enabling automatic stacking determination and extending to complex architectures, such as twisted or heterostructural moiré systems. Our method provides a critical tool for probing polar layered materials, which are promising candidates for ferroelectricity, optoelectronics, and spintronics.
- 25 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 41233-41243
Overcoming the Lattice Mismatch Barrier for Atomic Reconstruction in MoSe 2 /MoS 2 Heterobilayers
Twisted transition metal dichalcogenide (TMD) bilayers have garnered significant attention due to the emergence of unconventional quantum phenomena, such as sliding ferroelectricity in multidomain TMD bilayers with domain walls (DWs). Thus, understanding their atomic reconstruction is essential for elucidating the origin of such properties. While atomic reconstruction has been observed in twisted bilayers with small lattice mismatch, large-mismatch systems have generally been thought to retain incommensurate moiré superlattices as the substantial bond deformation required for reconstruction renders it energetically unfavorable. Here, we demonstrate that MoSe2/MoS2 heterobilayers with a large lattice mismatch can reconstruct into commensurate domain structures by encapsulation annealing at a high temperature of >1100 °C. This process supplied sufficient thermal energy and vertical compression to enable local atomic rearrangements and facilitates vacancy-assisted chalcogen exchange across the interface, where Se and S atoms migrate between the two layers through chalcogen vacancies. This interlayer atomic diffusion results in the formation of the MoSe2-xSx/MoS2-xSex alloy, effectively reducing the lattice mismatch and enabling the formation of commensurate AB/BA domains separated by tensile saddle point (SP) boundaries. These tensile boundaries reflect residual in-plane strain from the reduced lattice mismatch, distinct from the shear-type boundaries observed in lattice-matched systems. Spectroscopic analysis further reveals enhanced interlayer coupling and room temperature valley polarization in the alloyed heterobilayer. Our findings establish a conceptual framework for structural reconstruction in large-lattice-mismatched van der Waals (vdW) heterostructures, where chalcogen alloying enables domain formation previously thought inaccessible, thereby offering additional pathways to engineer the structural and optoelectronic properties of 2D materials.
- 25 November 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (48) , 41233-41243
Overcoming the Lattice Mismatch Barrier for Atomic Reconstruction in MoSe 2 /MoS 2 Heterobilayers
Twisted transition metal dichalcogenide (TMD) bilayers have garnered significant attention due to the emergence of unconventional quantum phenomena, such as sliding ferroelectricity in multidomain TMD bilayers with domain walls (DWs). Thus, understanding their atomic reconstruction is essential for elucidating the origin of such properties. While atomic reconstruction has been observed in twisted bilayers with small lattice mismatch, large-mismatch systems have generally been thought to retain incommensurate moiré superlattices as the substantial bond deformation required for reconstruction renders it energetically unfavorable. Here, we demonstrate that MoSe2/MoS2 heterobilayers with a large lattice mismatch can reconstruct into commensurate domain structures by encapsulation annealing at a high temperature of >1100 °C. This process supplied sufficient thermal energy and vertical compression to enable local atomic rearrangements and facilitates vacancy-assisted chalcogen exchange across the interface, where Se and S atoms migrate between the two layers through chalcogen vacancies. This interlayer atomic diffusion results in the formation of the MoSe2-xSx/MoS2-xSex alloy, effectively reducing the lattice mismatch and enabling the formation of commensurate AB/BA domains separated by tensile saddle point (SP) boundaries. These tensile boundaries reflect residual in-plane strain from the reduced lattice mismatch, distinct from the shear-type boundaries observed in lattice-matched systems. Spectroscopic analysis further reveals enhanced interlayer coupling and room temperature valley polarization in the alloyed heterobilayer. Our findings establish a conceptual framework for structural reconstruction in large-lattice-mismatched van der Waals (vdW) heterostructures, where chalcogen alloying enables domain formation previously thought inaccessible, thereby offering additional pathways to engineer the structural and optoelectronic properties of 2D materials.
- Open Access
- 28 October 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (22)
Domain‐Wall‐Free Sliding Ferroelectricity in Fully Commensurate 3R Transition Metal Dichalcogenide Bilayers
Stacked bilayers of transition metal dichalcogenides (TMDs) with the rhombohedral (3R) domains exhibit robust room‐temperature sliding ferroelectricity with exceptional stability even at the ultrathin limit. Polarization switching in stacked 3R‐TMD bilayers is typically mediated by the lateral migration of domain walls (DWs). However, the random formation and pinning of DWs during stacking reduce reliability and uniformity in 2D ferroelectric devices. Here, DW‐free sliding ferroelectric switching in fully commensurate (FC) 3R‐TMD bilayers is demonstrated. Using encapsulation annealing or promoter‐assisted chemical vapor deposition (CVD), single‐domain 3R‐TMD bilayers (SD‐TMDs) are realized. These SD‐TMDs show pinning‐free ferroelectric switching, resulting in a larger remanent polarization, long retention, and improved thermal stability compared to artificially stacked poly‐domain 3R‐TMD bilayers (PD‐TMDs), ensuring complete polarization switching and addressing a key limitation of PD‐TMDs with short retention and lower polarization. Rectangular polarization–electric field ( P–E ) hysteresis loops in SD‐TMDs highlight their stable switching behavior with well‐defined coercive‐field‐dependence, in contrast to the gradual, incomplete transitions in PD‐TMDs. The DW‐free SD‐TMDs also show minimal device‐to‐device variation, making them suitable for large‐scale and reliable ferroelectric device applications. This work provides a reproducible pathway to obtain high‐quality DW‐free 3R‐TMD bilayers, offering a scalable platform for robust and high‐performance 2D ferroelectric devices.
- 28 October 2025
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (22)
Open AccessDomain‐Wall‐Free Sliding Ferroelectricity in Fully Commensurate 3R Transition Metal Dichalcogenide Bilayers
Stacked bilayers of transition metal dichalcogenides (TMDs) with the rhombohedral (3R) domains exhibit robust room‐temperature sliding ferroelectricity with exceptional stability even at the ultrathin limit. Polarization switching in stacked 3R‐TMD bilayers is typically mediated by the lateral migration of domain walls (DWs). However, the random formation and pinning of DWs during stacking reduce reliability and uniformity in 2D ferroelectric devices. Here, DW‐free sliding ferroelectric switching in fully commensurate (FC) 3R‐TMD bilayers is demonstrated. Using encapsulation annealing or promoter‐assisted chemical vapor deposition (CVD), single‐domain 3R‐TMD bilayers (SD‐TMDs) are realized. These SD‐TMDs show pinning‐free ferroelectric switching, resulting in a larger remanent polarization, long retention, and improved thermal stability compared to artificially stacked poly‐domain 3R‐TMD bilayers (PD‐TMDs), ensuring complete polarization switching and addressing a key limitation of PD‐TMDs with short retention and lower polarization. Rectangular polarization–electric field ( P–E ) hysteresis loops in SD‐TMDs highlight their stable switching behavior with well‐defined coercive‐field‐dependence, in contrast to the gradual, incomplete transitions in PD‐TMDs. The DW‐free SD‐TMDs also show minimal device‐to‐device variation, making them suitable for large‐scale and reliable ferroelectric device applications. This work provides a reproducible pathway to obtain high‐quality DW‐free 3R‐TMD bilayers, offering a scalable platform for robust and high‐performance 2D ferroelectric devices.