Jason William Misleh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jason William Misleh has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Jestin Gage Wright
Stanford University
5 shared publications - Benjamin Peter Charnay
Stanford University
4 shared publications - Matthew W. Kanan
Stanford University
4 shared publications Matthew Kanan
Stanford University
3 shared publicationsBenjamin Charnay
Stanford University
2 shared publicationsEthan R. Sauvé
Department of Chemistry, Massachusetts Institute of Technology; 77 Massachusetts Ave, Cambridge, USA
1 shared publication
Latest Publications
- 21 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46607-46614
Electrochemical Synthesis of Slaked Lime Utilizing a Diaphragm Flow Cell
Slaked lime (Ca(OH)2) is one of the most widely utilized chemicals, with applications in diverse industries including construction, mining, water treatment, and chemical manufacturing. Currently, Ca(OH)2 is synthesized by coal-fired calcination of CaCO3 to make CaO, followed by exothermic hydration. Converting CaCO3 into Ca(OH)2 using electrochemically generated acid and base has attracted great interest because it could be powered by renewable electricity and would generate the CO2 byproduct in a pure form. Previous electrochemical Ca(OH)2 syntheses have incorporated the processing of calcium salts within the electrochemical cell to avoid acid–base recombination losses, but these cells have poor stability and high energy demand. Herein, we show that production of high-salinity acid and base solutions using a diaphragm flow cell (DFC) coupled with ex situ processing of CaCO3 substantially improves the efficiency of electrochemical Ca(OH)2 production. Using a closed loop with a simple KCl salt solution, we demonstrate the synthesis of >99% pure Ca(OH)2 for 0.088 to 0.10 kWh per mole at productive current densities of 158 to 334 mA cm–2.
- 21 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46607-46614
Electrochemical Synthesis of Slaked Lime Utilizing a Diaphragm Flow Cell
Slaked lime (Ca(OH)2) is one of the most widely utilized chemicals, with applications in diverse industries including construction, mining, water treatment, and chemical manufacturing. Currently, Ca(OH)2 is synthesized by coal-fired calcination of CaCO3 to make CaO, followed by exothermic hydration. Converting CaCO3 into Ca(OH)2 using electrochemically generated acid and base has attracted great interest because it could be powered by renewable electricity and would generate the CO2 byproduct in a pure form. Previous electrochemical Ca(OH)2 syntheses have incorporated the processing of calcium salts within the electrochemical cell to avoid acid–base recombination losses, but these cells have poor stability and high energy demand. Herein, we show that production of high-salinity acid and base solutions using a diaphragm flow cell (DFC) coupled with ex situ processing of CaCO3 substantially improves the efficiency of electrochemical Ca(OH)2 production. Using a closed loop with a simple KCl salt solution, we demonstrate the synthesis of >99% pure Ca(OH)2 for 0.088 to 0.10 kWh per mole at productive current densities of 158 to 334 mA cm–2.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (56) , 2717
Zero Waste Hydrometallurgical Recycling of Li-Ion Batteries Enabled by a High Throughput, Energy-Efficient Salt Splitting Flow Cell
The dramatic expansion of Li-ion batteries (LIBs) today necessitates a similar expansion of LIB recycling to recover the critical mineral content of > 500 GWh worth of spent batteries and scrap anticipated as soon as 2030. The dominant hydrometallurgical route for recycling LIBs uses strong acid and base to leach and recover the valuable metals from battery cathodes. However, the process suffers from a significant salt waste burden, with 1.5 tons of impure Na2SO4 salt waste generated per ton of cathode material. This waste stream may instead be used to regenerate strong acid and base for hydrometallurgical recycling, creating a circular process and avoiding the need for continuous input of acid and base. Electrochemical systems for generating acid and base from such streams reported thus far operate at low current densities (2) and have a high energy demand, preventing their adoption at scale.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (56) , 2717
Zero Waste Hydrometallurgical Recycling of Li-Ion Batteries Enabled by a High Throughput, Energy-Efficient Salt Splitting Flow Cell
The dramatic expansion of Li-ion batteries (LIBs) today necessitates a similar expansion of LIB recycling to recover the critical mineral content of > 500 GWh worth of spent batteries and scrap anticipated as soon as 2030. The dominant hydrometallurgical route for recycling LIBs uses strong acid and base to leach and recover the valuable metals from battery cathodes. However, the process suffers from a significant salt waste burden, with 1.5 tons of impure Na2SO4 salt waste generated per ton of cathode material. This waste stream may instead be used to regenerate strong acid and base for hydrometallurgical recycling, creating a circular process and avoiding the need for continuous input of acid and base. Electrochemical systems for generating acid and base from such streams reported thus far operate at low current densities (2) and have a high energy demand, preventing their adoption at scale.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (58) , 2717
Zero Waste Hydrometallurgical Recycling of Li-Ion Batteries Enabled by a High Throughput, Energy-Efficient Salt Splitting Flow Cell
The dramatic expansion of Li-ion batteries (LIBs) today necessitates a similar expansion of LIB recycling to recover the critical mineral content of > 500 GWh worth of spent batteries and scrap anticipated as soon as 2030. The dominant hydrometallurgical route for recycling LIBs uses strong acid and base to leach and recover the valuable metals from battery cathodes. However, the process suffers from a significant salt waste burden, with 1.5 tons of impure Na2SO4 salt waste generated per ton of cathode material. This waste stream may instead be used to regenerate strong acid and base for hydrometallurgical recycling, creating a circular process and avoiding the need for continuous input of acid and base. Electrochemical systems for generating acid and base from such streams reported thus far operate at low current densities (2) and have a high energy demand, preventing their adoption at scale.
- 7 July 2026
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2026-01 (58) , 2717
Zero Waste Hydrometallurgical Recycling of Li-Ion Batteries Enabled by a High Throughput, Energy-Efficient Salt Splitting Flow Cell
The dramatic expansion of Li-ion batteries (LIBs) today necessitates a similar expansion of LIB recycling to recover the critical mineral content of > 500 GWh worth of spent batteries and scrap anticipated as soon as 2030. The dominant hydrometallurgical route for recycling LIBs uses strong acid and base to leach and recover the valuable metals from battery cathodes. However, the process suffers from a significant salt waste burden, with 1.5 tons of impure Na2SO4 salt waste generated per ton of cathode material. This waste stream may instead be used to regenerate strong acid and base for hydrometallurgical recycling, creating a circular process and avoiding the need for continuous input of acid and base. Electrochemical systems for generating acid and base from such streams reported thus far operate at low current densities (2) and have a high energy demand, preventing their adoption at scale.
- Open Access
- 20 March 2026
- Published by Springer Nature in Watt
- Vol. 1 (1) , 4
Li-ion battery recycling by energy-efficient, high-throughput Li2SO4 salt splitting in a diaphragm flow cell
- 20 March 2026
- Published by Springer Nature in Watt
- Vol. 1 (1) , 4
Open AccessLi-ion battery recycling by energy-efficient, high-throughput Li2SO4 salt splitting in a diaphragm flow cell
- Open Access
- 20 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Li-ion Battery Recycling by Energy-Efficient, High Throughput Li2SO4 Salt Splitting in a Diaphragm Flow Cell
Rapidly growing demand for lithium-ion batteries (LIBs) necessitates a significant expansion of LIB recycling to ensure adequate supply and avoid waste buildup. Traditional hydrometallurgical LIB recycling processes use super-stoichiometric quantities of acid and base and generate large volumes of salt waste which pose an environmental burden. Electrochemical regeneration of acid and base from salt offers a zero-waste alternative but faces challenges with respect to throughput and energy consumption, with current densities typically limited to ≤ 100 mA/cm 2 and energy demands > 0.10 kWh/mol. These limitations stem from a reliance on ion exchange membranes (IEMs), which lead to high cell resistance. This study reports a hydrometallurgical process to recycle lithium cobalt oxide (LCO) and lithium nickel manganese cobalt oxide (NMC) cathodes using acid and base electrochemically generated from a Li 2 SO 4 electrolyte. The electrochemical cell used contains no IEMs, enabling excellent energy efficiency between 0.033 - 0.097 kWh/mol at current densities up to 500 mA/cm 2 and imparting a robust tolerance for impurities that typically foul IEMs. The produced acid and base are found to be competent for etching and recovering > 90% of the valuable metals from LIBs at industrially relevant pulp densities up to 66 g/L, and are readily regenerated from the salt solution left at the end of the metal recovery process.
- 20 February 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLi-ion Battery Recycling by Energy-Efficient, High Throughput Li2SO4 Salt Splitting in a Diaphragm Flow Cell
Rapidly growing demand for lithium-ion batteries (LIBs) necessitates a significant expansion of LIB recycling to ensure adequate supply and avoid waste buildup. Traditional hydrometallurgical LIB recycling processes use super-stoichiometric quantities of acid and base and generate large volumes of salt waste which pose an environmental burden. Electrochemical regeneration of acid and base from salt offers a zero-waste alternative but faces challenges with respect to throughput and energy consumption, with current densities typically limited to ≤ 100 mA/cm 2 and energy demands > 0.10 kWh/mol. These limitations stem from a reliance on ion exchange membranes (IEMs), which lead to high cell resistance. This study reports a hydrometallurgical process to recycle lithium cobalt oxide (LCO) and lithium nickel manganese cobalt oxide (NMC) cathodes using acid and base electrochemically generated from a Li 2 SO 4 electrolyte. The electrochemical cell used contains no IEMs, enabling excellent energy efficiency between 0.033 - 0.097 kWh/mol at current densities up to 500 mA/cm 2 and imparting a robust tolerance for impurities that typically foul IEMs. The produced acid and base are found to be competent for etching and recovering > 90% of the valuable metals from LIBs at industrially relevant pulp densities up to 66 g/L, and are readily regenerated from the salt solution left at the end of the metal recovery process.
- Open Access
- 24 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Li-ion Battery Recycling by Energy-Efficient, High Throughput Li2SO4 Salt Splitting in a Diaphragm Flow Cell
Rapidly growing demand for lithium-ion batteries (LIBs) necessitates a significant expansion of LIB recycling to ensure adequate supply and reduce environmental burdens. Traditional hydrometallurgical LIB recycling processes use superstoichiometric quantities of acid and base and generate large volumes of salt waste. Electrochemical regeneration of acid and base from salt offers a zero-waste alternative but faces challenges with respect to throughput and energy consumption. This study reports a hydrometallurgical process to recycle lithium cobalt oxide (LCO) and lithium nickel manganese cobalt oxide (NMC) cathodes using acid and base electrochemically generated from a Li2SO4 electrolyte. The electrochemical cell used contains no ion exchange membranes, enabling excellent energy efficiency between 0.033 - 0.097 kWh/mol at current densities up to 500 mA/cm2 and imparting a robust tolerance for impurities that typically foul IEMs. The produced acid and base are found to be competent for etching and recovering >90% of the valuable metals from LIBs at industrially relevant pulp densities up to 66 g/L, and are readily regenerated from the salt solution left at the end of the metal recovery process.
- 24 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessLi-ion Battery Recycling by Energy-Efficient, High Throughput Li2SO4 Salt Splitting in a Diaphragm Flow Cell
Rapidly growing demand for lithium-ion batteries (LIBs) necessitates a significant expansion of LIB recycling to ensure adequate supply and reduce environmental burdens. Traditional hydrometallurgical LIB recycling processes use superstoichiometric quantities of acid and base and generate large volumes of salt waste. Electrochemical regeneration of acid and base from salt offers a zero-waste alternative but faces challenges with respect to throughput and energy consumption. This study reports a hydrometallurgical process to recycle lithium cobalt oxide (LCO) and lithium nickel manganese cobalt oxide (NMC) cathodes using acid and base electrochemically generated from a Li2SO4 electrolyte. The electrochemical cell used contains no ion exchange membranes, enabling excellent energy efficiency between 0.033 - 0.097 kWh/mol at current densities up to 500 mA/cm2 and imparting a robust tolerance for impurities that typically foul IEMs. The produced acid and base are found to be competent for etching and recovering >90% of the valuable metals from LIBs at industrially relevant pulp densities up to 66 g/L, and are readily regenerated from the salt solution left at the end of the metal recovery process.
- Open Access
- 5 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Membrane-free electrochemical production of acid and base solutions capable of processing ultramafic rocks
Electrochemical production of acid and base from water enables their use as regenerable reagents in closed-loop processes, with attractive applications including CO2 capture or mineralization and low-temperature production of Ca(OH)2. Conventional systems utilize ion exchange membranes (IEMs) to inhibit H+/OH– recombination, which leads to high resistive losses that compromise energy efficiency and poor tolerance for polyvalent metal ions that complicates applications involving mineral resources. Here we use ion transport modeling to guide the design of a system that uses a simple porous separator instead of IEMs. Using H2 redox reactions for H+/OH– production, we demonstrate acid-base production at useful concentrations in the presence of polyvalent impurities with lower energy demand and higher current density than reported IEM-based systems. Cells can be stacked by combining H2 electrodes into a bipolar gas diffusion electrode, which recirculates H2 with near-unity efficiency. We show that the cell outputs extract alkalinity from olivine and serpentine as Mg(OH)2 and Mg3Si2O6(OH)2, which remove CO2 from ambient air to form Mg carbonates. These studies establish the principles for membrane-free electrochemical acid-base production, enabling closed-loop resource recovery and material processing powered by renewable electricity.
- 5 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Open AccessMembrane-free electrochemical production of acid and base solutions capable of processing ultramafic rocks
Electrochemical production of acid and base from water enables their use as regenerable reagents in closed-loop processes, with attractive applications including CO2 capture or mineralization and low-temperature production of Ca(OH)2. Conventional systems utilize ion exchange membranes (IEMs) to inhibit H+/OH– recombination, which leads to high resistive losses that compromise energy efficiency and poor tolerance for polyvalent metal ions that complicates applications involving mineral resources. Here we use ion transport modeling to guide the design of a system that uses a simple porous separator instead of IEMs. Using H2 redox reactions for H+/OH– production, we demonstrate acid-base production at useful concentrations in the presence of polyvalent impurities with lower energy demand and higher current density than reported IEM-based systems. Cells can be stacked by combining H2 electrodes into a bipolar gas diffusion electrode, which recirculates H2 with near-unity efficiency. We show that the cell outputs extract alkalinity from olivine and serpentine as Mg(OH)2 and Mg3Si2O6(OH)2, which remove CO2 from ambient air to form Mg carbonates. These studies establish the principles for membrane-free electrochemical acid-base production, enabling closed-loop resource recovery and material processing powered by renewable electricity.