Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Indriana Lestari has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Combination Process of Rice Husk Ash Coagulation and Electrocoagulation for Palm Oil Mill Effluent Treatment

    by Indriana Lestari, Dwi Amalia, Widyawanto Prastistho, Jeremia Bernadin Perangin Angin, Muhammad Haekal Zenatik

    Palm oil mill effluent (POME) poses a significant environmental threat due to its high organic and inorganic load. This study introduces a novel integration of rice husk ash (RHA) coagulation and electrocoagulation (EC) for sustainable POME remediation. Thermally treated at 500 °C for two hours, RHA was characterized via FTIR, revealing active silica-based functional groups conducive to charge neutralization and adsorption. Treatment experiments employed 9.3 g/L RHA and aluminum electrodes spaced 20 mm apart under varying currents of 10, 15, and 20 A over 15, 30, and 45 minutes. At the highest tested condition (9.3 g/L RHA, 20 A, 45 minutes), the integrated process achieved 78% total solids (TS) and 43% chemical oxygen demand (COD) removal, surpassing individual RHA coagulation removed 34% TS and 17% COD, while EC alone achieved 43% TS and 18% COD removal. The superior performance stems from synergistic flocculation, adsorption, and electroflotation. Compared to conventional methods, the combined RHA–EC system offers faster treatment, lower chemical and energy demands, and improved sustainability. These findings suggest a scalable solution for decentralized POME treatment, particularly in resource-limited palm oil-producing regions.


  • Open Access

    Studi Isoterm Adsorbsi dan Termodinamika Pada Proses Penyisihan Ion Fe (III) Menggunakan Pektin dari Kulit Pisang

    by Indriana Lestari, Yuli Ristianingsih, Alit Istiani, Titi Tiara Anasstasia

    Adsorben berupa pektin berhasil diekstraksi dari kulit pisang menggunakan larutan asam kuat dan telah digunakan untuk menyisihkan ion Fe3+ dalam air. Pengaruh berbagai parameter terhadap proses adsorbsi, seperti waktu kontak, pH larutan, dosis adsorben, dan temperatur adsorbsi diinvestigasi dalam suatu sistem batch. Konsentrasi ion Fe3+ dalam larutan air diukur menggunakan Atomic Absorption Spectrometry . Efisiensi adsorbsi terbaik diperoleh pada waktu kontak selama 4 jam, pH larutan 2, dosis adsorben sebesar 3 g, dan temperatur 20oC. Mekanisme proses adsorbsi dan perubahan energi bebas Gibbs, entalpi, serta entropi telah dievalusi. Model isoterm Freundlich dan Temkin paling sesuai untuk menggambarkan mekanisme adsorbsi ion Fe3+ pada pektin dengan R2 berturut-turut 0,9871 dan 0,9591. Data parameter termodinamika membuktikan bahwa adsorpsi ion Fe3+ bersifat eksotermis dan berlangsung secara tidak spontan pada rentang temperatur 20 hingga 60ᵒC. Penelitian ini menunjukkan bahwa kulit pisang dapat dimanfaatkan sebagai adsorben murah yang menjanjikan untuk menghilangkan ion Fe3+ dalam air.

  • Open Access

    Immobilization of Coal Fly Ash in Alginate Beads for Adsorption of Fe (III) Ions

    by Fauzan Irfandy, Husna Muizzati Shabrina, Indriana Lestari, Heni Anggorowati, Perwitasari Perwitasari

    Various industrial, agricultural, household, mining, smelting, and chemical industrial activities can generate waste containing heavy metals such as Fe(III). Fly ash has the potential as an effective adsorbent to capture heavy metals in wastewater. This study aims to immobilize coal fly ash in alginate beads for the adsorption of Fe(III) ions from synthetic waste solution. To test the adsorption capability of fly ash-alginate beads was performed by varying the contact time (1-24 hours), the mass of fly ash-alginate beads (5, 15, 35, 45, and 55 grams), and the initial concentration of Fe (III) ions at 6, 8, and 10 ppm. The determination of the concentration after adsorption was done using a UV-Vis spectrophotometer. The results showed that fly ash-alginate beads were able to remove Fe(III) ions up to 68.60% at a bead mass of 55 g, ion concentration of 10 ppm, and the equilibrium contact time was reached after 5 hours. The analysis results indicated that the adsorption mechanism followed the Freundlich isotherm model due to the heterogeneous surface exhibited.