JCJiangdong Cao

Jiangdong Cao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiangdong Cao has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • The pin-like interfacial structure and formation mechanism of aluminized coating prepared by pack cementation

    by Jiangdong Cao, Bochen Jiang, Yujie Ma, Xiping Yang, Feng Ding, Dongming Shi, Siyuan Chen, Xiaoshuai Zuo

  • Open Access

    Contrasting thermal stability and mechanical response in Cu/Mo and Cu/V nanostructured multilayers: the role of interfacial structure evolution

    by Y.J. Ma, X. Peng, Fanxiang Gu, Feng Ding, Dongming Shi, Bochen Jiang, Siyuan Chen, Xiaoshuai Zuo, Zihao Shen, Jiangdong Cao, et al.

    Nanostructured metallic multilayers are attractive for high-temperature applications, yet their strength often degrades during thermal exposure. Here, Cu/Mo and Cu/V multilayers with Cu layer thickness h of 5–100 nm (Mo and V layers fixed at 3 nm) were prepared by magnetron sputtering and annealed at 300–500 °C to clarify how layer thickness and annealing control their hardness and thermal stability. As-deposited Cu/V multilayers harden as h decreases, whereas Cu/Mo multilayers soften below a critical thickness of h = 10 nm. Annealing reinforces this contrast: at h = 5 nm, the Cu/V hardness rises from 4.6 to about 5.3 GPa at 400 °C and stays the highest even at 500 °C, whereas Cu/Mo softens at all thicknesses. The hardening of Cu/V is attributed to ordered intermixed layers formed at the interfaces, which raise the barrier to dislocation slip. In the as-deposited state, Cu/Mo softening below h = 10 nm arises from interface sliding and interdiffusion-induced intermixing, and annealing weakens the films further as the amorphous interlayer crystallizes. Both systems retain their layered structure up to 400 °C, indicating that interface chemistry, rather than layer integrity alone, controls the high-temperature strength of nanomultilayers.

  • Open Access

    The Microstructure and High‐temperature Cycle Oxidation Mechanism of the Nickel‐Based Superalloy Surface Treated by Laser Shock Processing and Ion Implantation at 1100 °C

    by Jiangdong Cao, Feng Ding, Yujie Ma, Xiping Yang, Bochen Jiang, Dong Ming Shi, Siyuan Chen, Lang Bai

    The microstructure and high‐temperature cycle oxidation mechanism of a nickel‐based superalloy subjected to hafnium (Hf) ion surface implantation and laser shock processing (LSP) at 1100 °C are investigated. The phases, microstructures, and morphologies of the superalloy subjected to LSP and ion implantation before and after high‐temperature cycle oxidation are characterized using various technologies, including X‐ray photoelectron spectroscopy, high‐temperature cycle oxidation, scanning electron microscopy, and transmission electron microscopy. A distinct amorphous HfO 2 layer, with a thickness of ≈30 nm, forms on the alloy's surface. Under the dual action of LSP and ion implantation, a large number of crystal defects, such as dislocation tangles, dislocation pile‐ups, twins and subgrains, are induced, and they provide channels for the rapid formation of protective oxide films through the diffusion of metal cations. At the initial stage of high‐temperature oxidation, the nucleation of oxides began at the dislocation sites. The higher the dislocation density is, the greater the formation density is. A different oxidation mechanism, in which titanium ions are preferential diffused, occurred in samples after Hf ion implantation. Compared with samples only treated by Hf ion implantation, those undergoing both LSP and ion implantation displayed oxide particles that are significantly smaller, more densely packed, and adhered more strongly to the substrate. This refined oxide layer effectively acts as a barrier, hindering the infiltration of oxygen ions into the underlying substrate.


  • Facile fabrication of fluorinated SiO 2 /acrylic-polyurethane superhydrophobic coatings with enhanced anti-icing and corrosion resistance for marine environments

    by Jiantao Wang, Fuhui Ma, Jiangdong Cao, Jie Wang, Bochen Jiang

    Conventional superhydrophobic coatings often exhibit significant limitations, including poor durability under low-temperature and unstable long-term anti-corrosion performance, which compromises their effectiveness in practical applications. This study prepares a superhydrophobic coating composed of fluorinated silica and acrylic-polyurethane via a simple spray process. The unique micro–nano structure on the coating surface generates a notable and stable air cushion effect, extending the freezing time of droplets and reducing the ice adhesion strength between the surface and ice. Additionally, the air pocket serves as a barrier, significantly enhancing the long-term corrosion resistance of the coating. The coating developed in this study provides new ideas for candidate anti-icing and anti-corrosion materials for ships.