Wim Temmerman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wim Temmerman has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Veronique Van Speybroeck
Center for Molecular Modeling (CMM), Ghent University, Technologiepark 46, 9052, Zwijnaarde, Belgium
5 shared publications - Angiolina Comotti
Dipartimento di Scienza dei Materiali, Università degli Studi Milano-Bicocca, Milano, Italy
2 shared publications - Ardeshir Dadgar Yeganeh
Nanochemistry Department, Max Planck Institute for Solid State Research, Heisenbergstrasse 1, Stuttgart, Germany, 70569
2 shared publications - Giuseppe Mastronardi
Dipartimento Di Chimica Centro NIS Unità Di Ricerca INSTM Università Degli Studi di Torino Torino Italy
2 shared publications - Nello Li Pira
Centro Ricerche Fiat, Strada Torino 50, 10043 Orbassano, Italy
2 shared publications - Silvia Bordiga
University of Turin
2 shared publications
Latest Publications
- Open Access
- 20 October 2026
- Published by Wiley in ChemistryEurope
- Vol. 4 (10) , e70378
Hindered Dynamic Diversity: Nuclear Magnetic Resonance Investigation of Cation Species in Zeolite Growth Systems
Traditional zeolite growth systems are notoriously difficult to study because of their complex speciation and heterogeneity. Hydrated silicate ionic liquids (HSILs) represent an attractive alternative as they are homogeneous, exhibit equilibrium speciation at all times, and can form different zeolite topologies under milder conditions. Selection of the alkali cation type and water content in HSILs offers control over the zeolitic topology. This offers a pathway to link zeolite topology to the molecular speciation and kinetics of the growth liquid as a function of cation type and concentration. Previous studies have shown that sodium and cesium present extreme cases in a series of Na‐, K‐, Rb‐ and Cs‐HSILs in terms of conductivity, viscosity, and molecular liquid structure. In this work, the local cationic environments of Na and Cs in HSILs at different concentrations are studied through an experimental–computational approach. Theoretical and experimental nuclear magnetic resonance spectroscopy combined with molecular dynamics simulations reveals a growing diversity in cation speciation and a strongly reduced mobility of species surrounding the cations when the cation concentration is increased.
- 20 October 2026
- Published by Wiley in ChemistryEurope
- Vol. 4 (10) , e70378
Open AccessHindered Dynamic Diversity: Nuclear Magnetic Resonance Investigation of Cation Species in Zeolite Growth Systems
Traditional zeolite growth systems are notoriously difficult to study because of their complex speciation and heterogeneity. Hydrated silicate ionic liquids (HSILs) represent an attractive alternative as they are homogeneous, exhibit equilibrium speciation at all times, and can form different zeolite topologies under milder conditions. Selection of the alkali cation type and water content in HSILs offers control over the zeolitic topology. This offers a pathway to link zeolite topology to the molecular speciation and kinetics of the growth liquid as a function of cation type and concentration. Previous studies have shown that sodium and cesium present extreme cases in a series of Na‐, K‐, Rb‐ and Cs‐HSILs in terms of conductivity, viscosity, and molecular liquid structure. In this work, the local cationic environments of Na and Cs in HSILs at different concentrations are studied through an experimental–computational approach. Theoretical and experimental nuclear magnetic resonance spectroscopy combined with molecular dynamics simulations reveals a growing diversity in cation speciation and a strongly reduced mobility of species surrounding the cations when the cation concentration is increased.
- Open Access
- 12 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
The Impact of Linker Disorder in Multivariate Metal-Organic Frameworks on Mechanical and Phonon Properties
While the reticular nature of metal-organic frameworks (MOFs) allows incorporating highly symmetric building blocks, it also supports linker asymmetry and linker mixing within a single material. These imperfections impact both the framework structure and, crucially, its underlying physical properties. However, microscopic configurations of organic linkers are challenging to detect experimentally and we lack accurate atomistic models computationally. This work investigates the impact of orientational and compositional linker disorder on the emergent macroscopic behaviour of UiO-type MOFs with asymmetric linkers, based on azobenzene and stilbene compounds with different mixedlinker compositions. Atomic interactions in these multivariate MOFs are modelled using an accurate machine-learning potential (MLP) derived with a recent cluster-based learning algorithm. We find that axial linker rotations occur below the millisecond time scale and are hindered for asymmetric linkers, thereby leading to geometric frustration of the linker backbone within the cubic crystal system of the MOF. Flat bands in the phonon band structures corroborate the latter effect. We predict bulk moduli of a series of mono- and multivariate Zr-MOFs and uncover a nonlinear trend with linker composition. This work demonstrates that individual structural models fail to capture the complexity of realistic MOFs with mixed-linker compositions, and a structural ensemble approach is necessary to estimate representative properties. Combining an ensemble description with accurate MLPs holds promise to more generally model spatially disordered framework materials with multiple linkers and establish novel structure-function relationships.
- 12 October 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe Impact of Linker Disorder in Multivariate Metal-Organic Frameworks on Mechanical and Phonon Properties
While the reticular nature of metal-organic frameworks (MOFs) allows incorporating highly symmetric building blocks, it also supports linker asymmetry and linker mixing within a single material. These imperfections impact both the framework structure and, crucially, its underlying physical properties. However, microscopic configurations of organic linkers are challenging to detect experimentally and we lack accurate atomistic models computationally. This work investigates the impact of orientational and compositional linker disorder on the emergent macroscopic behaviour of UiO-type MOFs with asymmetric linkers, based on azobenzene and stilbene compounds with different mixedlinker compositions. Atomic interactions in these multivariate MOFs are modelled using an accurate machine-learning potential (MLP) derived with a recent cluster-based learning algorithm. We find that axial linker rotations occur below the millisecond time scale and are hindered for asymmetric linkers, thereby leading to geometric frustration of the linker backbone within the cubic crystal system of the MOF. Flat bands in the phonon band structures corroborate the latter effect. We predict bulk moduli of a series of mono- and multivariate Zr-MOFs and uncover a nonlinear trend with linker composition. This work demonstrates that individual structural models fail to capture the complexity of realistic MOFs with mixed-linker compositions, and a structural ensemble approach is necessary to estimate representative properties. Combining an ensemble description with accurate MLPs holds promise to more generally model spatially disordered framework materials with multiple linkers and establish novel structure-function relationships.
- Open Access
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (10) , 2889-2897
Fine-Tuning the Pressure Response and Mechanical Properties of Azobenzene- and Stilbene-Based Zr-Metal–Organic Frameworks through Multivariate Design
The rich chemistry of molecular framework materials enables precise control of physico-chemical properties through structural design of framework topology and underlying building blocks. Here, we demonstrate the tuning of mechanical properties in a series of mixed-linker Zr-based MOFs incorporating azobenzene- and stilbene-based linkers. We synthesized a series of highly porous mixed-linker MOFs and confirmed formation of solid-solutions with random linker mixing using hyperspectral Raman imaging and powder X-ray diffraction (PXRD). We further investigate the linker disorder in a mixed-linker system by single-crystal X-ray diffraction (SCXRD). Using high-pressure PXRD and molecular simulations, we probed the pressure response across this series and show that the bulk modulus can be finely tuned between 9 and 5 GPa by varying linker composition. This multivariate design strategy offers a versatile route to tailor the pressure response of framework materials and may enable counterintuitive mechanical properties in future systems.
- 1 September 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (10) , 2889-2897
Open AccessFine-Tuning the Pressure Response and Mechanical Properties of Azobenzene- and Stilbene-Based Zr-Metal–Organic Frameworks through Multivariate Design
The rich chemistry of molecular framework materials enables precise control of physico-chemical properties through structural design of framework topology and underlying building blocks. Here, we demonstrate the tuning of mechanical properties in a series of mixed-linker Zr-based MOFs incorporating azobenzene- and stilbene-based linkers. We synthesized a series of highly porous mixed-linker MOFs and confirmed formation of solid-solutions with random linker mixing using hyperspectral Raman imaging and powder X-ray diffraction (PXRD). We further investigate the linker disorder in a mixed-linker system by single-crystal X-ray diffraction (SCXRD). Using high-pressure PXRD and molecular simulations, we probed the pressure response across this series and show that the bulk modulus can be finely tuned between 9 and 5 GPa by varying linker composition. This multivariate design strategy offers a versatile route to tailor the pressure response of framework materials and may enable counterintuitive mechanical properties in future systems.
- Open Access
Diamine Grafting of Pyrazole‐Based MOF‐303 for Diluted‐Source CO 2 Capture
Amine‐functionalized materials have been extensively investigated for CO 2 capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO 2 concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF‐303. The pyrazole linkers in MOF‐303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which is then grafted to the pyrazolate moieties through charged‐assisted hydrogen bonds. The resulting MOF‐303#EDA exhibits a remarkable CO 2 uptake of 0.71 mmol g − 1 at 298 K and 450 ppm CO 2 . Notably, the high CO 2 uptake of this material at 0.15 bar (2.5 mmol g −1 ) and its cyclability demonstrated in breakthrough experiments make it a promising candidate for point source CO 2 capture industrial applications. The complex nature of amine grafting on MOF‐303 and its interaction with CO 2 are investigated in depth by combining spectroscopic techniques (FT‐IR and SS‐NMR), synchrotron‐source X‐ray diffraction, and computational modeling.
Open AccessDiamine Grafting of Pyrazole‐Based MOF‐303 for Diluted‐Source CO 2 Capture
Amine‐functionalized materials have been extensively investigated for CO 2 capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO 2 concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF‐303. The pyrazole linkers in MOF‐303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which is then grafted to the pyrazolate moieties through charged‐assisted hydrogen bonds. The resulting MOF‐303#EDA exhibits a remarkable CO 2 uptake of 0.71 mmol g − 1 at 298 K and 450 ppm CO 2 . Notably, the high CO 2 uptake of this material at 0.15 bar (2.5 mmol g −1 ) and its cyclability demonstrated in breakthrough experiments make it a promising candidate for point source CO 2 capture industrial applications. The complex nature of amine grafting on MOF‐303 and its interaction with CO 2 are investigated in depth by combining spectroscopic techniques (FT‐IR and SS‐NMR), synchrotron‐source X‐ray diffraction, and computational modeling.
- Open Access
- 11 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Diamine grafting of pyrazole-based MOF-303 for diluted-source CO2 capture
Amine-functionalized materials have been extensively investigated for CO₂ capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO₂ concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF-303. The pyrazole linkers in MOF-303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which are then grafted to the pyrazolate moieties through charged-assisted hydrogen bonds. The resulting MOF-303#EDA exhibits a remarkable CO₂ uptake of 0.71 mmol g⁻¹ at 298 K and 450 ppm CO₂. Notably, the high CO₂ uptake of this material at 0.15 bar (2.5 mmol g-1) and its cyclability demonstrated in breakthrough experiments make it promising candidate for point source CO₂ capture industrial applications. The complex nature of amine grafting on MOF-303 and its interaction with CO₂ were investigated in depth by combining spectroscopic techniques (FT-IR and SS-NMR), synchrotron-source X-ray diffraction, and computational modeling.
- 11 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDiamine grafting of pyrazole-based MOF-303 for diluted-source CO2 capture
Amine-functionalized materials have been extensively investigated for CO₂ capture, with adsorption mechanisms based primarily on carbamate formation. Among the different strategies, grafting amine moieties onto porous solid supports represents a benchmark approach for developing highly effective adsorbents, even at very low CO₂ concentrations. In this work, we propose a novel strategy for anchoring amine functionalities onto the surface of a Metal–Organic Framework (MOF), exploiting the unique chemistry/reactivity of the inexpensive and scalable MOF-303. The pyrazole linkers in MOF-303 serve as acidic anchoring sites for ethylenediamine molecules (EDAs), protonating one of the two amines to form an ammonium cation, which are then grafted to the pyrazolate moieties through charged-assisted hydrogen bonds. The resulting MOF-303#EDA exhibits a remarkable CO₂ uptake of 0.71 mmol g⁻¹ at 298 K and 450 ppm CO₂. Notably, the high CO₂ uptake of this material at 0.15 bar (2.5 mmol g-1) and its cyclability demonstrated in breakthrough experiments make it promising candidate for point source CO₂ capture industrial applications. The complex nature of amine grafting on MOF-303 and its interaction with CO₂ were investigated in depth by combining spectroscopic techniques (FT-IR and SS-NMR), synchrotron-source X-ray diffraction, and computational modeling.