Jie Ren
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jie Ren has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Huang Jinjun
DC Technical Center State Grid Corporation of China 100052 Beijing China
1 shared publication Jinyang Xu
State Grid Shandong Electric Power Research Institute, Jinan, China
1 shared publication- Li Chun
School of Energy and Power Engineering University of Shanghai for Science and Technology 200093 Shanghai China
1 shared publication - Lyu Xuebin
State Grid Shandong Electric Power Company 250001 Jinan China
1 shared publication Ming Li
State Grid Shandong Electric Power Research Institute, Jinan, China
1 shared publication- Ming Li
State Grid Shandong Electric Power Research Institute, Jinan 250003, China
1 shared publication
Latest Publications
- Open Access
- 28 October 2025
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 27 (8) , 1406-1424
Research on the mechanism of bending and torsional vibration of rotor induced by winding inter-turn short-circuit in large synchronous condenser excitation
The synchronous condenser plays a crucial role in reactive power compensation and voltage support in ultra-high voltage direct current power grids. Vibration is a key bottleneck for the safe and stable operation of the synchronous condenser, especially rotor vibration resulting from electromagnetic torque caused by inter-turn short-circuit. This article takes a 300 MV large synchronous condenser as the research object, and studies the influence of electromagnetic torque caused by inter-turn short-circuit on the vibration of the rotor. Through theoretical analysis and finite element simulation, a theoretical model and a finite element model of rotor bending-torsional coupled vibration were established, and the accuracy of the theoretical model was validated experimentally. The results show that: The first three bending frequencies are 11.93 Hz, 31.27 Hz, and 89.46 Hz; Under both static and dynamic imbalance conditions, the vibration amplitude of the rotor increases with the increase of the shorted turn ratio; The vibration amplitude before and after being stimulated under dynamic unbalance is larger than that under static imbalance. The research results can provide a theoretical basis for the design and safe operation and maintenance of the synchronous condenser.
- 28 October 2025
- Published by JVE International Ltd. in Journal of Vibroengineering
- Vol. 27 (8) , 1406-1424
Open AccessResearch on the mechanism of bending and torsional vibration of rotor induced by winding inter-turn short-circuit in large synchronous condenser excitation
The synchronous condenser plays a crucial role in reactive power compensation and voltage support in ultra-high voltage direct current power grids. Vibration is a key bottleneck for the safe and stable operation of the synchronous condenser, especially rotor vibration resulting from electromagnetic torque caused by inter-turn short-circuit. This article takes a 300 MV large synchronous condenser as the research object, and studies the influence of electromagnetic torque caused by inter-turn short-circuit on the vibration of the rotor. Through theoretical analysis and finite element simulation, a theoretical model and a finite element model of rotor bending-torsional coupled vibration were established, and the accuracy of the theoretical model was validated experimentally. The results show that: The first three bending frequencies are 11.93 Hz, 31.27 Hz, and 89.46 Hz; Under both static and dynamic imbalance conditions, the vibration amplitude of the rotor increases with the increase of the shorted turn ratio; The vibration amplitude before and after being stimulated under dynamic unbalance is larger than that under static imbalance. The research results can provide a theoretical basis for the design and safe operation and maintenance of the synchronous condenser.