Yuhang Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuhang Jiang has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Rainer Haag
Institute of Chemistry and Biochemistry Freie Universität Berlin Berlin Germany
5 shared publications Boyu Zheng
Freie Universität Berlin, Research Building SupraFAB Altensteinstr. 23 a
3 shared publicationsMathias Dimde
Freie Universität Berlin, Research Building SupraFAB Altensteinstr. 23 a
3 shared publicationsYizhe Pan
Freie Universität Berlin, Research Building SupraFAB Altensteinstr. 23 a
3 shared publications- Yi‐Min Tu
Institute of Chemistry and Biochemistry Freie Universität Berlin Berlin Germany
3 shared publications - Andreas J. Achazi
Institute of Chemistry and Biochemistry Freie Universität Berlin Berlin Germany
2 shared publications
Latest Publications
- Open Access
- 9 November 2026
- Published by American Chemical Society (ACS) in ACS Nano
Stiffness Directs Intracellular Fate and Intercellular Transport of Nanoparticles
Nanoparticles have been developed as delivery vehicles to achieve uniform distribution of drugs in the tumor, but they are still not optimal for deep tumor penetration due to the hindrance by the dense extracellular matrix. Enabling active transport via tumor cells has been explored as a solution, which has been achieved by tuning the size and surface chemistry of nanoparticles. Here, we show that particle stiffness is another key determinant. Using positively charged polyglycerol nanogels with matched size, charge, and composition, we found that stiff nanogels preferentially enter cells via clathrin-mediated endocytosis (CME), undergo lysosomal processing, and are efficiently exocytosed, enabling transcellular transport. In contrast, soft nanogels are taken up mainly by macropinocytosis, accumulate in the Golgi apparatus, and exhibit prolonged intracellular retention. Finally, the efficient CME and subsequent exocytosis of stiff nanoparticles contribute to the enhanced transcytosis efficiency, allowing them to penetrate 3D tumor spheroids. This stiffness-dependent cellular itinerary operates without additional surface modifications, revealing a general design principle whereby intrinsic mechanical properties can control intracellular and intercellular transport behavior of nanoparticles.
- 9 November 2026
- Published by American Chemical Society (ACS) in ACS Nano
Open AccessStiffness Directs Intracellular Fate and Intercellular Transport of Nanoparticles
Nanoparticles have been developed as delivery vehicles to achieve uniform distribution of drugs in the tumor, but they are still not optimal for deep tumor penetration due to the hindrance by the dense extracellular matrix. Enabling active transport via tumor cells has been explored as a solution, which has been achieved by tuning the size and surface chemistry of nanoparticles. Here, we show that particle stiffness is another key determinant. Using positively charged polyglycerol nanogels with matched size, charge, and composition, we found that stiff nanogels preferentially enter cells via clathrin-mediated endocytosis (CME), undergo lysosomal processing, and are efficiently exocytosed, enabling transcellular transport. In contrast, soft nanogels are taken up mainly by macropinocytosis, accumulate in the Golgi apparatus, and exhibit prolonged intracellular retention. Finally, the efficient CME and subsequent exocytosis of stiff nanoparticles contribute to the enhanced transcytosis efficiency, allowing them to penetrate 3D tumor spheroids. This stiffness-dependent cellular itinerary operates without additional surface modifications, revealing a general design principle whereby intrinsic mechanical properties can control intracellular and intercellular transport behavior of nanoparticles.
- Open Access
- 16 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44)
Reusable Polyphenol Building Blocks Enable Recyclable Epoxy‐Amine Thermosets via Methanolysis
Biobased polyphenols represent attractive alternatives to bisphenol A for epoxy thermosets, yet most bio‐derived epoxy networks remain permanently cross‐linked and are difficult to recycle. Herein, we report a modular molecular design strategy that converts renewable polyphenols into reusable functional building blocks for recyclable epoxy–amine thermosets. Distinct from conventional degradable epoxy networks, this platform enables systematic structural variation and establishes a clear structure–depolymerization relationship. Kinetic and computational analyses further support a previously unrecognized ether‐assisted methanolysis mechanism, in which neighboring ether functionalities and a favorable aliphatic amine environment lower the apparent kinetic barrier and modulate the local methanol environment around the cleavable ester bonds in a configuration‐dependent manner. Consequently, the resulting thermosets undergo efficient methanolysis under mild conditions (70°C), affording reusable molecular components while maintaining tunable thermal and mechanical properties. Furthermore, carbon fiber–reinforced composites based on the optimized formulation can be efficiently depolymerized, yielding intact fibers and reusable building blocks in 88% isolated yield. The recovered polyols can be further upcycled into antibacterial quaternary ammonium materials, demonstrating a value‐added reuse pathway. This work identifies a previously unrecognized molecular promotion mechanism for catalyst‐free methanolysis and translates this mechanism insight into a structural design principle for recyclable polyphenol‐based epoxy–amine thermosets.
- 16 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44)
Open AccessReusable Polyphenol Building Blocks Enable Recyclable Epoxy‐Amine Thermosets via Methanolysis
Biobased polyphenols represent attractive alternatives to bisphenol A for epoxy thermosets, yet most bio‐derived epoxy networks remain permanently cross‐linked and are difficult to recycle. Herein, we report a modular molecular design strategy that converts renewable polyphenols into reusable functional building blocks for recyclable epoxy–amine thermosets. Distinct from conventional degradable epoxy networks, this platform enables systematic structural variation and establishes a clear structure–depolymerization relationship. Kinetic and computational analyses further support a previously unrecognized ether‐assisted methanolysis mechanism, in which neighboring ether functionalities and a favorable aliphatic amine environment lower the apparent kinetic barrier and modulate the local methanol environment around the cleavable ester bonds in a configuration‐dependent manner. Consequently, the resulting thermosets undergo efficient methanolysis under mild conditions (70°C), affording reusable molecular components while maintaining tunable thermal and mechanical properties. Furthermore, carbon fiber–reinforced composites based on the optimized formulation can be efficiently depolymerized, yielding intact fibers and reusable building blocks in 88% isolated yield. The recovered polyols can be further upcycled into antibacterial quaternary ammonium materials, demonstrating a value‐added reuse pathway. This work identifies a previously unrecognized molecular promotion mechanism for catalyst‐free methanolysis and translates this mechanism insight into a structural design principle for recyclable polyphenol‐based epoxy–amine thermosets.
- Open Access
- 16 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e3352626
Reusable Polyphenol Building Blocks Enable Recyclable Epoxy‐Amine Thermosets via Methanolysis
Biobased polyphenols represent attractive alternatives to bisphenol A for epoxy thermosets, yet most bio‐derived epoxy networks remain permanently cross‐linked and are difficult to recycle. Herein, we report a modular molecular design strategy that converts renewable polyphenols into reusable functional building blocks for recyclable epoxy–amine thermosets. Distinct from conventional degradable epoxy networks, this platform enables systematic structural variation and establishes a clear structure–depolymerization relationship. Kinetic and computational analyses further support a previously unrecognized ether‐assisted methanolysis mechanism, in which neighboring ether functionalities and a favorable aliphatic amine environment lower the apparent kinetic barrier and modulate the local methanol environment around the cleavable ester bonds in a configuration‐dependent manner. Consequently, the resulting thermosets undergo efficient methanolysis under mild conditions (70°C), affording reusable molecular components while maintaining tunable thermal and mechanical properties. Furthermore, carbon fiber–reinforced composites based on the optimized formulation can be efficiently depolymerized, yielding intact fibers and reusable building blocks in 88% isolated yield. The recovered polyols can be further upcycled into antibacterial quaternary ammonium materials, demonstrating a value‐added reuse pathway. This work identifies a previously unrecognized molecular promotion mechanism for catalyst‐free methanolysis and translates this mechanism insight into a structural design principle for recyclable polyphenol‐based epoxy–amine thermosets.
- 16 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e3352626
Open AccessReusable Polyphenol Building Blocks Enable Recyclable Epoxy‐Amine Thermosets via Methanolysis
Biobased polyphenols represent attractive alternatives to bisphenol A for epoxy thermosets, yet most bio‐derived epoxy networks remain permanently cross‐linked and are difficult to recycle. Herein, we report a modular molecular design strategy that converts renewable polyphenols into reusable functional building blocks for recyclable epoxy–amine thermosets. Distinct from conventional degradable epoxy networks, this platform enables systematic structural variation and establishes a clear structure–depolymerization relationship. Kinetic and computational analyses further support a previously unrecognized ether‐assisted methanolysis mechanism, in which neighboring ether functionalities and a favorable aliphatic amine environment lower the apparent kinetic barrier and modulate the local methanol environment around the cleavable ester bonds in a configuration‐dependent manner. Consequently, the resulting thermosets undergo efficient methanolysis under mild conditions (70°C), affording reusable molecular components while maintaining tunable thermal and mechanical properties. Furthermore, carbon fiber–reinforced composites based on the optimized formulation can be efficiently depolymerized, yielding intact fibers and reusable building blocks in 88% isolated yield. The recovered polyols can be further upcycled into antibacterial quaternary ammonium materials, demonstrating a value‐added reuse pathway. This work identifies a previously unrecognized molecular promotion mechanism for catalyst‐free methanolysis and translates this mechanism insight into a structural design principle for recyclable polyphenol‐based epoxy–amine thermosets.
- Open Access
- 17 November 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (52)
Heteromultivalente Nanogele als hochwirksame Inhibitoren von Pseudomonas aeruginosa
Zusammenfassung: Die zunehmende Verbreitung mikrobieller Resistenzen erfordert neue antibakterielle Konzepte zur gezielten Erkennung und Abtötung pathogener Bakterien. In dem vorliegenden Artikel stellen wir die Synthese eines heteromultivalenten Nanogelsystems gegen Pseudomonas aeruginosa ( P. aeruginosa ) vor. Diese Nanogele basieren auf biokompatiblen Polyglycerinen und sind mit den Zuckerliganden Fucose (Fuc) bzw. Galactose (Gal) funktionalisiert, um P. aeruginosa gezielt anzugreifen. Durch eine weitere Modifikation dieser Nanogele mit den kurzkettigen Peptiden BMAP‐18 (GRFKRFRKKFKKLFKKLS) konnten wir eine Inaktivierung von über 99,99 % planktonischer sowie über 99,9 % biofilmbeschichteter P. aeruginosa innerhalb von 12 Stunden Behandlung erreichen. Darüber hinaus zeigt das System ein breites antimikrobielles Wirkungsspektrum und hemmt wirksam Escherichia coli sowie Methicillin‐resistente Staphylococcus aureus (MRSA). Dieses modulare Design bietet eine vielversprechende Strategie für die Entwicklung neuartiger antimikrobieller Therapien, die auf biofilmassoziierte Infektionen und multiresistente Bakterien (MDR) abzielen.
- 17 November 2025
- Published by Wiley in Angewandte Chemie
- Vol. 137 (52)
Open AccessHeteromultivalente Nanogele als hochwirksame Inhibitoren von Pseudomonas aeruginosa
Zusammenfassung: Die zunehmende Verbreitung mikrobieller Resistenzen erfordert neue antibakterielle Konzepte zur gezielten Erkennung und Abtötung pathogener Bakterien. In dem vorliegenden Artikel stellen wir die Synthese eines heteromultivalenten Nanogelsystems gegen Pseudomonas aeruginosa ( P. aeruginosa ) vor. Diese Nanogele basieren auf biokompatiblen Polyglycerinen und sind mit den Zuckerliganden Fucose (Fuc) bzw. Galactose (Gal) funktionalisiert, um P. aeruginosa gezielt anzugreifen. Durch eine weitere Modifikation dieser Nanogele mit den kurzkettigen Peptiden BMAP‐18 (GRFKRFRKKFKKLFKKLS) konnten wir eine Inaktivierung von über 99,99 % planktonischer sowie über 99,9 % biofilmbeschichteter P. aeruginosa innerhalb von 12 Stunden Behandlung erreichen. Darüber hinaus zeigt das System ein breites antimikrobielles Wirkungsspektrum und hemmt wirksam Escherichia coli sowie Methicillin‐resistente Staphylococcus aureus (MRSA). Dieses modulare Design bietet eine vielversprechende Strategie für die Entwicklung neuartiger antimikrobieller Therapien, die auf biofilmassoziierte Infektionen und multiresistente Bakterien (MDR) abzielen.
- Open Access
- 11 November 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (52) , e13121
Heteromultivalent Nanogels as Highly Potent Inhibitors of Pseudomonas Aeruginosa
The increasing prevalence of microbial resistance requires new antibacterial concepts for selective targeting and killing of pathogenic bacteria. Here, we report the synthesis of a heteromultivalent nanogel system against Pseudomonas aeruginosa ( P. aeruginosa ). These nanogels are based on biocompatible polyglycerols and functionalized with sugar ligands fucose (Fuc) or galactose (Gal) for P. aeruginosa targeting. With a further modification of these nanogels with BMAP‐18 short chain peptides (GRFKRFRKKFKKLFKKLS), we have achieved > 99.99% inactivation of planktonic and > 99.9% inactivation of biofilm‐coated P. aeruginosa within 12 h of treatment. Additionally, the system demonstrates broad‐spectrum antimicrobial potential, effectively inhibiting Escherichia coli ( E. coli ) and Methicillin‐resistant Staphylococcus aureus (MRSA). This modular design offers a promising strategy for the development of next‐generation antimicrobial therapies targeting biofilm‐associated infections and MDR bacteria.
- 11 November 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (52) , e13121
Open AccessHeteromultivalent Nanogels as Highly Potent Inhibitors of Pseudomonas Aeruginosa
The increasing prevalence of microbial resistance requires new antibacterial concepts for selective targeting and killing of pathogenic bacteria. Here, we report the synthesis of a heteromultivalent nanogel system against Pseudomonas aeruginosa ( P. aeruginosa ). These nanogels are based on biocompatible polyglycerols and functionalized with sugar ligands fucose (Fuc) or galactose (Gal) for P. aeruginosa targeting. With a further modification of these nanogels with BMAP‐18 short chain peptides (GRFKRFRKKFKKLFKKLS), we have achieved > 99.99% inactivation of planktonic and > 99.9% inactivation of biofilm‐coated P. aeruginosa within 12 h of treatment. Additionally, the system demonstrates broad‐spectrum antimicrobial potential, effectively inhibiting Escherichia coli ( E. coli ) and Methicillin‐resistant Staphylococcus aureus (MRSA). This modular design offers a promising strategy for the development of next‐generation antimicrobial therapies targeting biofilm‐associated infections and MDR bacteria.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Design and Implementation of High Voltage Solid State Switching High Frequency-Low Noise Nanosecond Pulse Power Supply Module with High Reliable Switching Characteristics
It is a simple and reliable scheme to use the switching characteristic of high-voltage solid-state switch to generate controllable high-voltage pulse power. Compared with the traditional gas switch, the current solid-state switch can be fully controlled in the switching state, and the switching frequency is greatly increased, gradually replacing the traditional gas switch. However, the circuit structure of the cascade solid-state switch is complex, the reliability is low, and the switching characteristics of the switch are still not ideal. In order to solve this problem, based on the SiC-JEFT cascaded solid-state switch structure, by considering the difference of the reverse avalanche breakdown voltage and the superposition of the reverse breakdown current at different positions for different voltage equalizers, the high reliability switching characteristics of the proposed solid-state switch can be realized only by optimizing the parameters of the single avalanche breakdown resistance value, and the design of the 6kV solid-state switching mode high frequency-low noise nanosecond pulse power supply module is realized. The experimental results show that the SiC-JFET cascaded solid-state switch has the characteristics of fast switching speed and low switching loss, the pulse power supply has the characteristics of simple circuit structure, high repetition frequency and low noise.
- 22 May 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Design and Implementation of High Voltage Solid State Switching High Frequency-Low Noise Nanosecond Pulse Power Supply Module with High Reliable Switching Characteristics
It is a simple and reliable scheme to use the switching characteristic of high-voltage solid-state switch to generate controllable high-voltage pulse power. Compared with the traditional gas switch, the current solid-state switch can be fully controlled in the switching state, and the switching frequency is greatly increased, gradually replacing the traditional gas switch. However, the circuit structure of the cascade solid-state switch is complex, the reliability is low, and the switching characteristics of the switch are still not ideal. In order to solve this problem, based on the SiC-JEFT cascaded solid-state switch structure, by considering the difference of the reverse avalanche breakdown voltage and the superposition of the reverse breakdown current at different positions for different voltage equalizers, the high reliability switching characteristics of the proposed solid-state switch can be realized only by optimizing the parameters of the single avalanche breakdown resistance value, and the design of the 6kV solid-state switching mode high frequency-low noise nanosecond pulse power supply module is realized. The experimental results show that the SiC-JFET cascaded solid-state switch has the characteristics of fast switching speed and low switching loss, the pulse power supply has the characteristics of simple circuit structure, high repetition frequency and low noise.