YZYicong Zhong

Yicong Zhong

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yicong Zhong has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Study on the Mechanical Properties of Engineered Geopolymer Composites Based on Red Mud, Fly Ash, and Slag

    by Shuo Xu, Yu Ling, Xin Luo, Jingyuan Wang, Yicong Zhong, Gai Chen

    To promote the valorization of red mud (RM), a high-volume industrial solid waste, engineered geopolymer composites (EGC) were developed using a ternary binder comprising ground granulated blast-furnace slag (GGBS), fly ash (FA), and RM. Ten mixtures were designed using a simplex-centroid method, and the effects of binder composition on fresh-state flowability, axial compressive behavior, and axial tensile performance were systematically investigated. The results showed that GGBS was the dominant factor governing compressive strength. The mixture with the highest GGBS content, G50F50R0, achieved a maximum compressive strength of 111.7 MPa. Although RM incorporation reduced compressive strength, the strength remained approximately 70 MPa at an RM content of 30%, while the post-peak brittleness was noticeably mitigated. In tension, an appropriate RM content of 5–15% effectively reduced matrix toughness, enabling pronounced strain-hardening and multiple-cracking behavior through fiber bridging. Consequently, tensile ductility and strain energy density were substantially enhanced, with the ultimate tensile strain reaching up to 6.9%; however, excessive RM addition led to performance degradation. By overlaying multi-objective performance boundaries, an optimized composition range of 40–45% GGBS, 50–60% FA, and 0–8% RM was identified, enabling the simultaneous achievement of high strength, high toughness, and high energy absorption. These findings demonstrate the technical feasibility of using RM to produce EGC and provide a theoretical basis for the high-value utilization of RM.

  • Open Access

    Finite Element Analysis of the Flexural Performance of ECC–Concrete Composite Beams Reinforced with GFRP–Steel Composite Bars

    by Yu Ling, Xin Luo, Shuo Xu, Zile Feng, Junzhe Qin, Yicong Zhong, Yongjian Cai

    GFRP-reinforced concrete structures often suffer from insufficient ductility and limited crack control capability. This study investigates the flexural behavior of ECC–concrete composite beams reinforced with steel–FRP composite bars (SFCBs) using finite element analysis. A three-dimensional nonlinear finite element model was developed in ABAQUS and validated against four-point bending tests of eight composite beam specimens. The model incorporated a bilinear constitutive relationship for SFCBs and a cohesive interface model to simulate the interaction between ECC and concrete. Based on the validated model, the effects of reinforcement type and ECC replacement height on the flexural performance of composite beams were evaluated. The results showed that the proposed model accurately reproduced the load–deflection responses, strain development, and failure processes of the tested beams. The reinforcement type significantly affected the overall structural behavior, resulting in different load-carrying characteristics and deformation responses. Increasing the ECC replacement height mainly improved the cracking resistance by increasing the cracking load and promoting a more uniform crack distribution, while its effects on the yield and ultimate loads were limited. ECC primarily contributed to crack control and damage mitigation, whereas SFCBs influenced the overall load-carrying behavior of the composite beams. These findings provide insights into the design and performance evaluation of ECC–concrete composite beams reinforced with SFCBs.

  • Open Access

    Flexural Behavior of Steel-FRP Composite Bars (SFCB)-Reinforced Concrete Beams: FEA Incorporating Bond-Slip Effects

    by Chaohao Bi, Shuo Xu, Yu Ling, Yicong Zhong, Linbo Hong, Yongjian Cai

    To overcome the corrosion issues of conventional steel reinforcement and the brittleness of fiber-reinforced polymer (FRP) materials, steel-FRP composite bars (SFCBs) offer an innovative solution by combining the ductility of steel with the high strength and corrosion resistance of FRP. However, existing research primarily focuses on experimental investigations, with insufficient numerical simulations of SFCB-reinforced concrete beams, particularly regarding bond-slip effects at the SFCB-concrete interface—a critical mechanism governing composite action and structural performance. This study develops a finite element (FE) model incorporating SFCB-concrete bond-slip effects to analyze the influence of outer FRP layer thickness (0, 3, 5, and 7 mm) on the flexural performance of concrete beams. The FE model demonstrates good predictive accuracy, with errors in ultimate capacity and mid-span displacement within 7% and 8%, respectively. Both cracking and yield loads increase with FRP thickness, while the ultimate load peaks at 5 mm. At 7 mm, concrete crushing occurs before the SFCB reaches its ultimate strength. The ductility index decreases with greater FRP thickness due to increased elastic energy without enhanced plastic energy (fixed steel core area), thereby reducing overall ductility. These findings provide a theoretical basis for optimizing SFCB-reinforced concrete structural design.