Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Francesco Mazzei has a total of 853 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Robotic airship for measurement and validation of a CERN detector stray magnetic field

    by Francesco Mazzei, Paolo F. Scaramuzzino, Luca Bernardi, Fabio Curti, Corrado Gargiulo

    The detector caverns of the Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN) are harsh environments for robotic operation: confined, without satellite navigation, close to fragile hardware, and permeated by intense stray magnetic fields that can disturb onboard electronics, actuators, and sensors. Characterising these fields is a prerequisite for deploying robots in the caverns, and is also relevant to detector operation, since anomalous fringe fields can affect the surrounding infrastructure and particle tracking. Yet conventional approaches based on fixed sensors, mechanical systems, or manual surveys provide only sparse spatial coverage. This paper presents a robotic airship that combines a three-axis Hall-effect sensor with ArUco marker-based visual localisation to measure the three-dimensional stray field in the ALICE (A Large Ion Collider Experiment) detector cavern. Two campaigns were conducted with the magnets at nominal current: static measurements at twenty known positions, isolating sensor accuracy from localisation uncertainty, and dynamic flights over the same instrumented region. The measurements were compared with an electromagnetic simulation through a dedicated uncertainty-propagation framework. The simulation reproduces the transverse field components well (R 2 = 0.86–0.98), whereas the vertical component shows a lower agreement (R 2 = 0.75–0.79) and a systematic positive bias of 0.65–1.12 mT, more consistent with simplifications in the electromagnetic model than with measurement uncertainty. These results demonstrate the feasibility of aerial robotic platforms for stray field characterisation in large experimental facilities and lay the groundwork for a fully autonomous survey system.

  • Open Access

    Modeling mechanical disturbances induced by high intensity magnetic fields on electric motors

    by Luca Bernardi, Francesco Mazzei, Paolo F. Scaramuzzino, Corrado Gargiulo, Fabio Curti


  • Open Access

    A Numerical Model for Estimating the Equivalent Magnetic Moment Induced on Electromagnetic Motors by High Intensity Magnetic Fields

    by Luca Bernardi, Francesco Mazzei, Paolo Francesco Scaramuzzino, Corrado Gargiulo, Fabio Curti

    The increasing use of robotic platforms in hazardous and magnetically complex environments, such as underground research facilities at CERN, demands a detailed understanding of how strong external magnetic fields affect electromechanical actuation. Quadruped robots equipped with electromagnetic (EM) motors are particularly vulnerable, as their actuators interact directly with ambient magnetic fluxes, generating additional mechanical forces and moments that can compromise stability, trajectory tracking and overall operational safety. This work presents a modeling framework for estimating the equivalent magnetic moment of an EM motor subjected to high-intensity magnetic fields. The proposed approach combines numerical simulation datasets with an analytical dipole-based formulation to derive a computationally efficient model capable of predicting magnetic-induced mechanical disturbances in real/time. The model accounts for the dependence of the magnetic moment on both the external field intensity and the motor’s orientation relative to the field lines, enabling the control system to anticipate disturbance torques and implement appropriate compensation strategies. The accuracy and reliability of the model were validated experimentally by rotating a Unitree GO-M8010-6 motor within controlled magnetic fields and comparing the measured torques with the model predictions. The results demonstrate close agreement in both trend and amplitude, confirming that the proposed formulation can provide the level of fidelity required for real-time control applications in magnetically harsh environments.

  • Open Access

    Experimental Characterization of Miniature DC Motors for Robotics in High Magnetic Field Environments

    by Francesco Mazzei, Luca Bernardi, Paolo Francesco Scaramuzzino, Corrado Gargiulo, Fabio Curti

    The deployment of robotic systems in hazardous and magnetically intense environments requires careful assessment of their performance under external disturbances. In particular, electromagnetic motors used for actuation may interact with strong magnetic fields, potentially impairing their functionality. This study investigates the behaviour of miniature brushed coreless Direct Current (DC) motors for small Unmanned Aerial Vehicle (UAV) applications in magnetically harsh environments, such as underground accelerator facilities like the Large Hadron Collider (LHC) at CERN. Experimental tests were conducted measuring four main physical quantities: the torque components acting along the axes orthogonal to the shaft, the torque about the shaft axis, variations in angular speed, and electrical current consumption. The results showed that the motors were able to operate under external magnetic field intensities up to 0.4 T, although measurable torques acted on the internal permanent magnet and on the ferromagnetic housing material. Some discrepancies and speed fluctuations were observed during operation and were attributed to mobility of the internal permanent magnet. Overall, the findings demonstrate that the tested miniature motors exhibit resilience in high magnetic fields but suffer from manufacturing variability, suggesting that higher-quality motors with more consistent characteristics would be preferable for reliable robotic operation in harsh environments.


  • Open Access

    The PLATO Mission

    by Heike Rauer, Conny Aerts, Juan Cabrera, Magali Deleuil, Anders Erikson, Laurent Gizon, Mariejo Goupil, Ana Heras, Jose Lorenzo-Alvarez, Filippo Marliani, et al.

    PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution. The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.

  • Open Access

    Mission analysis, dynamics and robust control of an indoor blimp in a CERN detector magnetic environment

    by Francesco Mazzei, Lorenzo Teofili, Fabio Curti, Corrado Gargiulo

    At the European Organization for Nuclear Research (CERN), a Research and Development (R&D) program studies robotic systems for inspection and maintenance of the next-generation of particle detectors. The design and operation of these systems are affected by the detector’s cavern harsh environment consisting of high magnetic fields and radiations. This work presents a feasibility study for aerial inspection and mapping around a CERN particle detector using a robotic Lighter-than-Air (LtA) Unmanned Aerial Vehicle (UAV), specifically a blimp. Firstly, mission scenarios and the detector environment are introduced; in this context a new empirical model is proposed for the estimation of magnetic disturbances resulting from the interaction of electromagnetic motors with the external magnetic field. Subsequently, the design of a reference blimp and the control system is presented, comparing different control techniques, namely, Computed Torque Control (CTC), Sliding Mode Control (SMC) and Nonsingular Terminal Sliding Mode Control (NTSMC). Finally, the results of trajectory tracking simulations are reported, considering both the uncertainties of the dynamic parameters and the estimated magnetic disturbances. This work demonstrates that the blimp successfully follows desired trajectory, navigating complex environments while maintaining stability and accuracy. Despite the challenges posed by high magnetic fields, indoor blimps can effectively offer safer and more efficient approaches to facility surveillance and maintenance, reducing radiation exposure for human personnel and minimizing detector downtime.