DKDong-Ha Kim

Dong-Ha Kim

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dong-Ha Kim has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • In Situ Single‐Atom Decoration of Transition Metal Dichalcogenides by Millisecond Flash Thermal Synthesis Toward High Performance Room Temperature Chemiresistors

    by Euichul Shin, Jacob Choe, Wonjun Choi, Sanghyeon Park, Chungseong Park, Jong Won Baek, Sungyoon Woo, Mingyu Sagong, Minsu Kim, Chan‐Woo Lee, et al.

    Transition metal dichalcogenides (TMD) are attractive for adsorption‐driven reactions, yet their activity is strongly site‐dependent. Activity is concentrated at edge motifs, whereas most exposed area resides on inert basal planes. Dual‐site designs that enrich edges while activating basal planes with catalysts remain challenging to realize without coarsening and metal aggregation during thermal processing. Here, an intense pulsed light‐driven flash thermal synthesis route is demonstrated that directly converts ammonium tetrathiomolybdate ((NH 4 ) 2 MoS 4 ) into few‐layer, edge‐rich MoS 2 nanoflakes (FTS‐MoS 2 ) within 10 ms pulse in ambient‐air. Ultrafast photothermal shock (1192–1811°C; ∼10 5 /10 4 °C s − 1 heating/cooling rates) suppresses in‐plane coarsening and out‐of‐plane stacking, while Pt, Ir, or Au single atoms are uniformly anchored on MoS 2 via rapid metal‐sulfur coordination without aggregation. As a proof‐of‐concept, FTS‐MoS 2 exhibits a 23.6‐fold higher NO 2 response at 5 ppm than solvothermally synthesized MoS 2 . Pt single atom functionalization (FTS‐Pt SA ‐MoS 2 , 1.2 wt%) further boosts the response by 22.8‐fold versus pristine FTS‐MoS 2 and achieves 100.8% response toward 400 ppb NO 2 at room temperature. Density functional theory supports enhanced NO 2 adsorption and charge transfer on FTS‐Pt SA ‐MoS 2 . With a low electrical energy input (8.6 kJ g −1 ) and scalable irradiation, ultrafast FTS enables industrially relevant active‐site and single‐atom engineering in TMDs for high‐performance gas sensors.


  • Open Access

    Tunable and highly sensitive functionalized carbon-nanotube-based integrated systems for chemical gas sensing

    by Jaekang Song, Dong-Ha Kim, Jan Tiepelt, Young-Moo Jo, Graham McGrath, Michael Song, Tianyang Chen, Jiande Wang, Alicia Coto, Sundar Palani, et al.

    Chemical gas sensing is essential for healthcare, environmental monitoring and industrial safety, yet current sensors lack sensitivity, selectivity and scalability. Carbon nanotube field-effect transistors (CNFETs) offer high surface area and low-power operation, but they traditionally provide limited chemical discrimination. Here we report an integrated sensing platform that combines CNFETs with conductive metal–organic frameworks and catalytic metal nanoparticles to achieve tunable selectivity and enhanced sensitivity. The hybrid architecture boosts response by up to two orders of magnitude and enables on-chip pattern generation for robust gas classification. As proof of concept, we apply the platform to the classification of clinically relevant bacteria and yeast species by analysing the volatile organic compounds emitted from cultures grown on agar plates with 95% accuracy, using a portable measurement set-up. By integrating functionalized CNFETs into a commercial foundry-derived system, this work introduces a rapid, cost-effective and scalable gas sensing approach for real-world biomedical and industrial sensing applications.


  • Flash-Thermochemical Engineering of Surface Activity on Nanomaterials for Sensor Applications

    by Dong-Ha Kim

    Momentary thermal annealing techniques leveraging photo-excited electrons have been employed for ultrafast optical sintering of carbon-based materials, metals, and narrow-bandgap oxides. When materials are exposed to intense light, the incoming photons interact with electrons, initiating energy transfer through photothermal conversion. This mechanism allows for localized and rapid annealing, characterized by extremely fast heating and cooling rates. We introduce a flash-thermal shock (FTS) technique conducted in ambient air, utilizing intense pulsed light (IPL) to achieve momentary high-temperature annealing. This approach significantly enhances photothermal conversion efficiency, enabling rapid and effective optical sintering of diverse nanomaterials, such as metal oxides, graphene oxide, carbon nanofibers, and MXenes. [1-5] The intense heat generated can modulate the phase and defect states of support materials, while simultaneously promoting in-situ synthesis and stabilization of catalysts on their surfaces. Notably, the method achieves exceptional heating and cooling rates (>10⁴ K/s) and peak temperatures exceeding 2000 K, facilitating the uniform formation of high-entropy alloy nanoparticles through combined thermodynamic and kinetic control. Furthermore, repeated FTS cycles post-nanoparticle formation can decompose these particles into single atoms. This method offers a novel platform for fabricating catalyst-integrated nanomaterials with high surface activity, essential for advanced applications. As a proof of concept, we demonstrate its utility in developing high-performance chemical sensors. References [1] "Low-Thermal-Budget Doping of 2D Materials in Ambient Air Exemplified by Synthesis of Boron-Doped Reduced Graphene Oxide.” Adv. Sci. 7, 1903318, 2020. [2] “Flash-Thermochemical Engineering of Phase and Surface Activity on Metal Oxides.” Chem 8, 14, 1014-1033, 2022. [3] “Flash-Thermal Shock Synthesis of Single-Atoms in Ambient Air.” ACS Nano 17, 23, 23347-23358, 2023. [4] “Flash-Thermal Shock Synthesis of High Entropy Alloys toward High Performance Water Splitting.” Advanced Materials 35, 2305222, 2023. [5] "Ultrafast Ambient-Air Exsolution on Metal Oxide via Momentary Photothermal Effect". ACS Nano 16, 11, 18133-18132, 2022.

  • Flash-Thermal Shock Engineering of Phase-Transitioned TMDs Anchored on CNTs

    by Sukjeong Kwon, Jihwan Eum, Sungwoo Eo, Dong-Ha Kim

    Molybdenum disulfide (MoS₂), a representative member of transition metal dichalcogenides (TMDs), exists in two distinct crystallographic phases: the semiconducting 2H (trigonal prismatic) phase and the metallic 1T (octahedral) phase. However, the stable basal plane of 2H-MoS₂ limits the number of active edge sites, leading to poor sensing performance. In sensing devices, chemical reactions primarily occur via adsorption at reactive sites on the material surface, while the detected signals are transmitted through the flow of electrons. Therefore, both electrical conductivity and the availability of reactive sites are critical factors that govern sensor performance. However, the intrinsically low conductivity of MoS₂ and the challenge of precisely controlling their mixed 1T–2H phases remain major obstacles. In this study, we present a CNT@MoS₂ heterostructure synthesized via flash thermal shock (FTS) process, utilizing single-walled carbon nanotubes (SWCNTs) as both conductive and photothermally active supports. The FTS process, based on intense pulsed light irradiation, enables ultrafast annealing to temperature as high as 1,268-2,330 K within 20 milliseconds and direct bottom-up synthesis of MoS₂ nanoparticles on SWCNT surfaces. Notably, temperatures exceeding 2,000 K, a carbo-thermal shock effect induces the formation of metastable mixed 1T–2H phases with high defect density. The resulting nanocomposites exhibit enhanced reactivity in gas sensing, demonstrating the FTS technique as an effective and scalable strategy for phase-engineered, surface-active TMD-based hybrid materials optimized for high-performance sensing platforms.

  • Ultrafast Photo-Thermochemical Synthesis of Catalyst-Decorated Porous Carbon Nanofibers

    by Sung-Woo Eo, Jihwan Eum, Sukjeong Kwon, Dong-Ha Kim

    Electrospun polyacrylonitrile (PAN) nanofibers are widely regarded as excellent precursors for electrically conductive carbon nanofibers (CNFs) due to their high carbon yield, fiber-forming capability, and the presence of abundant high quality carbon bonds. However, traditional carbonization methods require prolonged high-temperature treatment in inert atmospheres. In addition, additional catalyst integration on CNFs involves multi-step synthesis, which limit scalability and energy efficiency. To overcome these challenges, we propose an ultrafast and single step photothermal method that simultaneously carbonizes PAN nanofibers and forms metal catalysts using intense pulsed light (IPL) under ambient conditions. In this process, stabilized PAN nanofibers are exposed to a single light pulse, which rapidly induce localized photothermal heating. Within milliseconds, this not only transforms the polymer nanofibers into high quality conductive carbon networks but also reduces metal precursor directly on the fiber surface to form sub-10 nm metal nanoparticles. This approach eliminates the need for a furnace, vacuum systems, or reducing gases, allowing carbonization and catalyst formation to occur under open-air, energy-efficient, and non-contact conditions. The resulting catalyst-decorated CNFs exhibit hierarchical porosity and excellent surface accessibility, making them suitable for use in gas sensing applications. We demonstrate their functionality by fabricating sensitive and selective NO 2 gas sensors based on the prepared hybrid CNFs, which show high sensitivity and reliable operation under ambient conditions. This approach significantly simplifies the fabrication of CNF-based composite materials and broadens their application potential in gas sensors, electrocatalysis, and energy storage devices.