Francimarcio Geraldo da Silva Gambarra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Francimarcio Geraldo da Silva Gambarra has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Meiry Gláucia Freire Rodrigues
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
2 shared publications - Anna Karoline Freires de Sousa
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
1 shared publication - Anna Katharina Medeiros de Brito
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
1 shared publication - Francisco Lucas de Lima Carneiro
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
1 shared publication - Hugo Guimarães Matos
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
1 shared publication - José Lázaro da Silva Fernandes
Development Laboratory of New Materials, Academic Unit of Chemical Engineering, Center for Science and Technology, Federal University of Campina Grande, Aprígio Veloso, 882—Bodocongó, Campina Grande 58429-970, PB, Brazil
1 shared publication
Latest Publications
- Open Access
- 2 February 2026
- Published by MDPI AG in Separations
- Vol. 13 (2) , 53
Adsorption of Nystatin from Aqueous Solutions Using Nanoclay: Performance, Mechanisms, and Sustainability Aspects
The continuous release of pharmaceutical compounds into aquatic environments poses significant challenges to environmental sustainability, as conventional wastewater treatment plants are often ineffective in removing recalcitrant and bioactive molecules. In this study, the adsorption performance of nanoclay was systematically evaluated for the removal of nystatin, a polyene antifungal of emerging environmental concern, from aqueous solutions. The effects of solution pH, adsorption kinetics, equilibrium isotherms, and adsorption mechanisms were investigated under environmentally relevant conditions. Nanoclay exhibited outstanding removal efficiency, exceeding 98% across a wide pH range (3–11), thereby demonstrating strong operational robustness and minimal sensitivity to pH variations. Structural and spectroscopic analyses (XRD and FTIR) confirmed that adsorption occurred predominantly on the external surface of the nanoclay, without significant disruption of its lamellar structure, and was governed mainly by hydrophobic interactions and hydrogen bonding. Kinetic data were best described by the pseudo-second-order model, with rapid equilibrium achieved within approximately 20 min, indicating high affinity between nystatin and the adsorbent surface. Equilibrium data were best fitted by the Sips isotherm model, reflecting surface heterogeneity and a favorable adsorption process, with a high maximum adsorption capacity of approximately 911 mg/g. A preliminary cost analysis revealed low raw material costs, while energy consumption, particularly during drying, was identified as the main economic limitation. Overall, the results highlight Nanoclay as an efficient, robust, and promising adsorbent for the sustainable removal of hydrophobic pharmaceutical contaminants from water and wastewater.
- 2 February 2026
- Published by MDPI AG in Separations
- Vol. 13 (2) , 53
Open AccessAdsorption of Nystatin from Aqueous Solutions Using Nanoclay: Performance, Mechanisms, and Sustainability Aspects
The continuous release of pharmaceutical compounds into aquatic environments poses significant challenges to environmental sustainability, as conventional wastewater treatment plants are often ineffective in removing recalcitrant and bioactive molecules. In this study, the adsorption performance of nanoclay was systematically evaluated for the removal of nystatin, a polyene antifungal of emerging environmental concern, from aqueous solutions. The effects of solution pH, adsorption kinetics, equilibrium isotherms, and adsorption mechanisms were investigated under environmentally relevant conditions. Nanoclay exhibited outstanding removal efficiency, exceeding 98% across a wide pH range (3–11), thereby demonstrating strong operational robustness and minimal sensitivity to pH variations. Structural and spectroscopic analyses (XRD and FTIR) confirmed that adsorption occurred predominantly on the external surface of the nanoclay, without significant disruption of its lamellar structure, and was governed mainly by hydrophobic interactions and hydrogen bonding. Kinetic data were best described by the pseudo-second-order model, with rapid equilibrium achieved within approximately 20 min, indicating high affinity between nystatin and the adsorbent surface. Equilibrium data were best fitted by the Sips isotherm model, reflecting surface heterogeneity and a favorable adsorption process, with a high maximum adsorption capacity of approximately 911 mg/g. A preliminary cost analysis revealed low raw material costs, while energy consumption, particularly during drying, was identified as the main economic limitation. Overall, the results highlight Nanoclay as an efficient, robust, and promising adsorbent for the sustainable removal of hydrophobic pharmaceutical contaminants from water and wastewater.
- Open Access
Valorization of Bauxite Residue for Use as Adsorbent for Reactive Blue Removal: Regeneration Evaluation
In recent years, there has been increasing concern regarding the widespread occurrence of dyes in aquatic environments, due to their harmful effects on both water quality and human health. This investigation uses bauxite residue as a cost-effective sorbent to eradicate the hazardous reactive blue (RB) dye from aqueous solutions. The reusability potential of bauxite residue was also evaluated. The bauxite residue was characterized by X-ray diffraction, Cation Exchange Capacity, Chemical analysis, FTIR, and Analysis of particle size and particle distribution. The RB dye adsorption parameters revealed that the removal efficiency and adsorption capacity of bauxite residue was 100% and 186.01 mg/g, respectively, under the following adsorption conditions: adsorbent dosage of 0.5 mg/L, initial pH of 2, dye concentration of 50 mg/g, and reaction temperature of 25 °C. Furthermore, the adsorption of RB dye on bauxite residue followed the pseudo-second-order kinetic and Freundlich isotherm models. After one adsorption cycle, the adsorption capacity of bauxite residue for reactive RB removal reached 186.01 mg/g. The regeneration study revealed that the bauxite residue remained 99% of its original condition following the water regeneration cycle.
Open AccessValorization of Bauxite Residue for Use as Adsorbent for Reactive Blue Removal: Regeneration Evaluation
In recent years, there has been increasing concern regarding the widespread occurrence of dyes in aquatic environments, due to their harmful effects on both water quality and human health. This investigation uses bauxite residue as a cost-effective sorbent to eradicate the hazardous reactive blue (RB) dye from aqueous solutions. The reusability potential of bauxite residue was also evaluated. The bauxite residue was characterized by X-ray diffraction, Cation Exchange Capacity, Chemical analysis, FTIR, and Analysis of particle size and particle distribution. The RB dye adsorption parameters revealed that the removal efficiency and adsorption capacity of bauxite residue was 100% and 186.01 mg/g, respectively, under the following adsorption conditions: adsorbent dosage of 0.5 mg/L, initial pH of 2, dye concentration of 50 mg/g, and reaction temperature of 25 °C. Furthermore, the adsorption of RB dye on bauxite residue followed the pseudo-second-order kinetic and Freundlich isotherm models. After one adsorption cycle, the adsorption capacity of bauxite residue for reactive RB removal reached 186.01 mg/g. The regeneration study revealed that the bauxite residue remained 99% of its original condition following the water regeneration cycle.