LGLeonhard Ganzer

Leonhard Ganzer

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Leonhard Ganzer has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Modelling Transient Production Forecasting of Horizontal Wells in Abnormal High-Pressure Tight Gas Reservoirs

    by Lina Cao, Hehua Wang, Liping Jiang, Bo Zhang, Leonhard Ganzer, Ying Li, Xiaochao Wang, Ke Li, Siyu Pang, Heng Xiao

    Natural gas stands out as a cleaner source of energy due to its relatively lower carbon emissions, making it an appealing choice for numerous countries. Therefore, it is essential to gain a deeper understanding of natural gas reservoirs to ensure sustainable extraction and unlock their full potential. The behavior of fluid flow and production in complex gas reservoirs, especially those characterized by abnormal high-pressure and tight porous media, is not yet fully comprehended, necessitating further investigation. Traditional Darcy's law is no longer applicable in tight porous media with high pressure. To overcome this challenge, a new composite seepage model was developed. The model incorporates stress-sensitive permeability and threshold pressure gradient. We employed perturbation theory for permeability modulus and the Green function method for the inhomogeneous special solution, effectively addressing its nonlinearity. Through integration transformation methods, a dimensionless rate solution under constant bottom-hole pressure was derived in the Laplace domain. Eventually, a new model involving multiple factors has been proposed for production prediction in such gas reservoirs. Studying unsteady gas flow dynamics in tight formations provides valuable insights into flow patterns. To investigate transient flow characteristics in tight gas reservoirs, log-log figures were generated through Stehfest numerical inversion. Flow periods were classified based on standardized time stages for rate curves. A parametric study revealed that stress sensitivity damages permeability, causing a larger pressure drop in intermediate and late flow regimes. This effect is reflected in upward tendencies in rate derivative curves. A higher threshold pressure gradient indicates poorer reservoir properties, making fluid flow more difficult, as evidenced by steeper downwarping in production rate curves. The combined impact of stress-sensitivity and threshold pressure gradient accentuates the variation trend in these curves. Multi-stage hydraulic fracturing can effectively address the negative impacts of these two factors, which impede seepage. Enhancing fracture conductivity can decrease even eliminate the threshold pressure gradient, while increasing proppant strength can slow down elastic and plastic deformation of reservoir rock, thereby reducing the loss of permeability. The transient seepage model developed in this paper serves not only for production prediction but also to explain the related formation and well parameters. It functions as a traditional well test interpretation tool, particularly remarkable as it relies solely on daily production data, enhancing workflow efficiency and reducing testing time. The interpreted parameters are valuable for designing hydraulic fracturing operations, evaluating the potential of tight gas reservoirs, and ultimately increasing gas production rates.

  • Tertiary Low Salinity Waterflooding LSWF in Sandstone Reservoirs: Mechanisms, Synergies and Potentials in EOR Applications

    by Alexander Rock, Rafael E. Hincapie, Eugen Hoffmann, Leonhard Ganzer

    This work provides an extensive review on Low Salinity Water Flooding (LSWF) recovery mechanisms, as well as an evaluation of its synergies with Polymer Flooding (PF). Thereby, a critical state-of-the-art evaluation on LSWF and PF mechanisms is combined with selective laboratory experiments, performed to illustrate the observations and findings. This evaluation can be used as a guidance to understand the expected behavior of both processes when applied in combination. The work presented here comprises two main steps: 1) Comprehensive review of the mechanisms responsible of oil recovery in each process and 2) Predefined secondary and tertiary mode flooding experiments. First, oil recovery mechanisms associated to LSWF and PF have been analyzed in detail. Second, different field cases were compared in order to draw the main conclusions with regards to performance and recovery factors. This also helped to define the synergies of LSWF and PF in terms of technical and economic efficiency. Finally, secondary and tertiary mode experiments were performed to evaluate the feasibility of applying both processes. Despite of the over 15 mechanisms reported in the literature for LSWF, six main mechanisms were identified that contributes to oil recovery. Mechanisms are described as: 1) Wettability alteration 2) Multi-ion exchange, 3) Fine migration, 4) Salting-in, 5) Double-Layer-Expansion and, 6) Other mechanisms, such as osmotic pressure and IFT reduction. Thereby, wettability alteration and fine migration have the highest significance. On the other hand, PF mechanisms were found to be: 1) Viscous fingering reduction, 2) Enhanced flow between layers, 3) Pull-out effects, 4) Shear thickening/elastic turbulence and, 5) Relative permeability reduction. LSWF field cases revealed incremental recoveries of up to 13% OOIP whereas synergies between LSWF and PF yielded to an additional recovery of 15% OOIP, underlining the potential of the combination of both EOR technologies. Selective LSWF-PF experiments performed in sandstones core-plugs in this work, allowed the verification of the additional recoveries reported in the literature. Tertiary flooding with solely LSWF, showed a lower recovery than tertiary LSWF-PF flooding. Moreover, this observation confirms the potentiality of polymer-combined LSWF in sandstones. Additionally, with the combined processes, a lower polymer concentration was required than applying a typically designed polymer flooding. This can be translated to an economic benefit for field applications. Tertiary mode flooding experiments in sandstones and the analysis of field cases provided clear evidence of the advantages of LSWF-PF. This could yield that the processes -when applied in tandem- become a leading EOR strategy, ensuring the extension of the reservoir lifetime. Moreover, fellow researchers can benefit because the work provides a comprehensive review of Low Salinity Water Flooding and Polymer Flooding mechanisms. To the authors understanding, literature is currently lacking of such a review.


  • Enhancing Reservoir Understanding in Mature Fields: Adjoint-State Method Applied to a Semi-Synthetic Model

    by D. D. Awofodu, L. Ganzer, H. Almuallim

    Model validation using available history data demands that the model reflects relevant behaviour occurring in the subsurface. Reservoir models lacking in proper modelling of essential reservoir behaviour are poor representatives of reality. Usually, calibrating these models to history data require excessive use of parameter fudging to achieve meaningful match results. To combat this issue, an efficient approach to improve reservoir understanding is presented that investigates hidden reservoir behaviour at field, region and well level. The model screening approach uses static grid properties to explore unmatchable models for hidden reservoir behaviour. Permeability and/or porosity is defined as an input for the minimization problem with preset uncertainty limits ranging from zero to values greater than the default maximum values. The adjoint-state method is employed to condition simulation models to observation data. Unrealistic match results are realized at this stage which cannot be used for performance forecasting. Logical interpretation are generated for the extreme property updates. Feedback from interpretations are then used to enhance reservoir understanding. The PUNQ-S3 model is used to test proposed screening methodology. A variant of the adjoint-state method executed in an unrestrained manner proved its capability to reveal hidden reservoir behaviour. A handful of patterns that draws attention to hidden reservoir behaviour were observed in permeability and/or porosity distribution. In the case of a hidden fault, the permeability distribution around influenced wells experiences a sharp contrasting change; the high permeability region seeks more oil while the low permeability region constrains oil production. Also, in the case of a hidden aquifer, we observed an extreme vertical porosity and permeability update travelling down through all layers into the oil-water contact zone. Hidden channels are represented as high permeability streaks connecting affected wells. So far, the model screening approach suffers from one limitation – an inability to differentiate between a reservoir boundary and a fault close to the boundary. To guarantee that geological consistency is not sacrificed at the expense of history matching, local or global updates made to the starting model are restricted to true model variogram. The most crucial finding is that the production history must account for the physical mechanisms occurring in the representative reservoir. On the contrary, noisy production data or errors in field measurements limit the effectiveness of the adjoint-state method to provide insights on hidden reservoir behaviour.

  • GPU-Based Reservoir Flow Simulation

    by L. Ganzer, H. Blaschko, M. Wittman

  • Simulating Fractured Reservoirs Using Adaptive Dual Continuum

    by L.J. Ganzer

    This paper presents a new approach for the simulation of fractured or partially fractured reservoirs with a general-purpose reservoir simulator. In many fractured reservoirs, fractures could be found in limited zones or "sweetspots". Hence, not all parts of the reservoir will typically require dual porosity or dual permeability treatment. The method presented in this paper allows creation of dual porosity or dual permeability cells wherever the attributes of the fracture geological model suggest to do so. The remaining - unfractured - part of the model can be treated like conventional single porosity areas. This approach will be called adaptive dual continuum. As a result, the generated simulation grid block models will resemble the real geological situation more closely than any other modeling approach. This will result in maximum reliability of the simulation model and allow better estimation of recovery for the various recovery processes modeled. All fracture and matrix-fracture transfer properties are derived from the geological information and fracture intensity. The simulator - that applies an unstructured gridding method - will store them on a cell by cell basis. The paper will discuss the new workflow from generating the geological model by combining the strengths of continuous and discrete models, thereby achieving a high level of data integration until the consistent data export into the reservoir simulator. The adaptive dual continuum approach was successfully implemented into a commercial reservoir simulator and several examples will prove the capability of this reservoir modeling approach for accurate and economic simulation of fractured or partially fractured reservoirs. Introduction Natural or induced fractures play a crucial role in many petroleum reservoirs. Even though only a small percentage of toady's reservoir models explicitly describe the fractures, one may claim that practically most petroleum reservoirs are fractured (or partially fractured). Hence, one of the first questions to be raised is whether or not existing fractures are important for the reservoir behavior under producing conditions. In other words, what is contribution of the flow in fractures to the overall fluid flow? Are the fractures connected to each other and in this way forming a fracture network? Posing this question to a petrophysicist, to a geologist or to an engineer, one can expect different views and answers. As far as the reservoir engineer is concerned, only fractures and fracture networks that affect fluid transportation to and from the wells are of significance. Only when there are fractures with sufficient length of penetration through the reservoir rock, fractures that are interconnected and with sufficient density or spacing, their effects can be observed and measured under dynamic flow conditions. To assess fracture contributions accurately, a wide range of geological, petrophysical and engineering methods are applied. These methods apply to a large variety of different scales. The paper will assume that those investigations result in a reservoir that is characterized by - at least some - fractures that are significant for fluid flow and that the reservoir model must account for the fracturing in one way or the other. During the course of this paper an attempt is made to classify the type of fractures encountered in the respective reservoir. After a brief discussion on those fracture types, the paper will investigate the significance of the spatial (lateral or vertical) distribution of the fractures. The following questions must be asked in order to build a representative reservoir model: Are the fractures equally distributed or spaced? Is the fracture intensity and orientation approximately constant across the entire reservoir or are there some (important) areas that appear to be unfractured? As a result of those questions, one should be able to select the proper set of modeling and simulation tools. The paper will give a brief overview of available simulation and modeling approaches for fractured reservoirs leading to the definition of a new and flexible tool, the so called Adaptive Dual Continuum method.