JMJiangping Ma

Jiangping Ma

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jiangping Ma has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Adaptive Active Site Programming via Electrolyte Engineering Toward Enhanced Catalytic Activity

    by Shaojie Jing, Junfeng Mou, Zhouhao Zhu, Wencai Liu, Chaogang Ban, Yucui Xiang, Jing Fan, Zhiping Zeng, Hui Yin, Lu Xia, et al.

    Precise control over active site coordination is essential for advancing electrocatalysis, yet remains challenging due to insufficient understanding of how operating environments, particularly electrolyte anions, reshape local structure, and coordination. Here, we combine grand canonical ensemble calculations with experimental validations to investigate five representative anions (F − , Cl − , Br − , NO 3 − , and H 2 PO 4 − ) across a range of pH and potential conditions. Using Fe─N─C single‐atom catalysts and oxygen reduction reaction (ORR) as a prototypical system, we reveal the adaptive evolution of active site coordination: Anions act as axial ligands that modulate the electronic structure of active sites and enable pH‐dependent regulation of catalytic activity. Specifically, NO 3 − serves as the most effective axial ligand for enhancing catalytic activity across the entire pH range. Electrochemical measurements show enhanced ORR activity, and spectroscopic characterizations directly reveal axial NO 3 coordination upon introducing NO 3 − , supporting the theoretical predictions. Based on these insights, we propose an adaptive framework for electrolyte‐guided active site programming, which enables the selection of proper anion ligand with optimal catalytic activity under specific working conditions. This work bridges mechanistic modeling and experimental design, precisely constructing the active center for enhanced electrocatalytic activity.

  • Adaptive Active Site Programming via Electrolyte Engineering Toward Enhanced Catalytic Activity

    by Shaojie Jing, Junfeng Mou, Zhouhao Zhu, Wencai Liu, Chaogang Ban, Yucui Xiang, Jing Fan, Zhiping Zeng, Hui Yin, Lu Xia, et al.

    Precise control over active site coordination is essential for advancing electrocatalysis, yet remains challenging due to insufficient understanding of how operating environments, particularly electrolyte anions, reshape local structure, and coordination. Here, we combine grand canonical ensemble calculations with experimental validations to investigate five representative anions (F − , Cl − , Br − , NO 3 − , and H 2 PO 4 − ) across a range of pH and potential conditions. Using Fe─N─C single‐atom catalysts and oxygen reduction reaction (ORR) as a prototypical system, we reveal the adaptive evolution of active site coordination: Anions act as axial ligands that modulate the electronic structure of active sites and enable pH‐dependent regulation of catalytic activity. Specifically, NO 3 − serves as the most effective axial ligand for enhancing catalytic activity across the entire pH range. Electrochemical measurements show enhanced ORR activity, and spectroscopic characterizations directly reveal axial NO 3 coordination upon introducing NO 3 − , supporting the theoretical predictions. Based on these insights, we propose an adaptive framework for electrolyte‐guided active site programming, which enables the selection of proper anion ligand with optimal catalytic activity under specific working conditions. This work bridges mechanistic modeling and experimental design, precisely constructing the active center for enhanced electrocatalytic activity.

  • Open Access

    Piezocatalysis: Concepts, Advances, and Opportunities

    by Haodi Ran, Jiangping Ma, Chaogang Ban, Pengfei Luo, Lujie Ruan, Xiaoxing Wang, Liyong Gan, Ji‐Yan Dai, Xiaoyuan Zhou

    Piezocatalysis has recently emerged as a distinct paradigm of force‐driven catalysis, in which mechanical stress applied to piezoelectric materials induces internal electric fields that activate redox reactions under mild conditions. This mechanical‐to‐electrical energy conversion offers a new catalytic activation mode, particularly suited for scenarios where conventional stimuli are unavailable or undesirable. Over the past decade, substantial progress has been achieved in elucidating fundamental mechanisms, advancing material platforms, and demonstrating functional applications spanning environmental remediation, sustainable energy conversion, and biomedical therapies. Despite these advances, the field still lacks an integrated framework that connects fundamental concepts, mechanistic models, material design, performance optimization, standardized evaluation and benchmarking, and practical applications. This review establishes such a framework by systematically integrating these elements into a coherent structure for understanding, evaluating, and advancing piezocatalysis. Throughout, we place particular emphasis on what evidence is required to identify genuine piezocatalysis, how catalytic performance should be benchmarked under different mechanical inputs, and how conventional piezoelectric parameters relate to catalytic activity. We further discuss representative applications and outline remaining challenges and future opportunities, aiming to advance piezocatalysis from laboratory demonstrations toward reliable, efficient, and practical catalytic processes.


  • Mechanically driven piezocatalytic wastewater-to-hydrogen conversion in two-dimensional SnSe nanosheets

    by Xingyi Luo, Haixuan Wang, Jiangping Ma, Lujie Ruan, Xiaoxing Wang, Yajie Feng, Shaojie Jing, Daqing Xia, Jingfeng Li, Zilong Zhang, et al.

    Piezocatalysis is an emerging mechano-to-chemistry energy conversion technique that uses mechanically generated positive and negative charges to drive chemical reactions, opening broad opportunities in environmental remediation and energy conversion. However, most reported systems utilize only one type of charge for a single target reaction, leading to inefficient charge use. Here, we demonstrate that two-dimensional SnSe nanosheets can simultaneously use positive charges for pollutant degradation and negative charges for H2 evolution, thereby enabling mechanically driven piezocatalytic wastewater-to-hydrogen conversion. Under ultrasonic excitation at 80 kHz and 120 W, the SnSe nanosheets act as a bifunctional piezocatalyst, achieving a Rhodamine B degradation efficiency of 97.2% and an H2 yield of 1047.3 μmol g−1 within 2 h. The system also shows adaptability to different pollutant concentrations, pH values, pollutant species, and simulated mixed-pollutant wastewater. A flow-type piezocatalytic device further enables continuous H2 production and pollutant degradation beyond conventional batch tests. Mechanistic studies reveal that piezoelectrically generated positive charges promote hydroxyl radical generation for pollutant degradation, while negative charges facilitate H2 evolution through the *H intermediate. This work demonstrates a bifunctional charge utilization strategy for integrating wastewater purification with hydrogen production in a mechanically driven piezocatalytic system.


  • Spontaneous Symmetry Breaking via Metal‐Triggered Surface Defect Engineering for Durable Piezocatalytic Hydrogen Evolution

    by Lujie Ruan, Dazhong Sun, Jiangping Ma, Pengfei Luo, Yajie Feng, Xiaoxing Wang, Haodi Ran, Li‐Yong Gan, Guoyu Wang, Ji‐Yan Dai, et al.

    Piezocatalysis, which converts ubiquitous mechanical energy into chemical fuels, offers a sustainable route for distributed hydrogen production. However, progress in this field has largely been limited to material–level studies, often characterized by weak polarization, insufficient active sites, and a lack of long–term device–level demonstrations. Here, we propose a metal–triggered surface defect strategy that integrates surface metal anchoring with defect formation to simultaneously enhance polarization and increase the density of active sites. Using Au–ZnSnO 3 as a model system, we demonstrate that Au anchoring spontaneously induces Zn vacancy formation, breaking surface symmetry and strengthening the piezoelectric response by more than fivefold. These synergistic effects result in a 3.7‐fold enhancement in the hydrogen evolution rate, placing this material among the top‐performing piezocatalysts. Crucially, integrating the catalyst into a custom‐designed continuous–flow microreactor enables the first demonstration of ultra–long, device–level piezocatalytic hydrogen production for over 158 h, establishing a new benchmark for durability in this field. Experimental and theoretical analyses reveal that Au anchoring reduces the formation energy of Zn vacancies and optimizes hydrogen adsorption energetics, thereby achieving a balance between proton reduction and hydrogen desorption. This work establishes metal–triggered surface defect engineering as a promising design strategy that links structural symmetry with catalytic reactivity in mechanically driven energy conversion systems.


  • Open Access

    Simultaneous Wastewater‐to‐Hydrogen Upgrading via Mechanically Driven Piezocatalysis Over Ag‐ZnO Nanorods

    by Yiqing Wei, Jianghai Huang, Yejunchi Zhang, Yang Wang, Dongmei Li, Chaogang Ban, Peng Yu, Jiangping Ma, Zhenxiang Cheng

    The growing demand for sustainable hydrogen production has driven increasing interest in wastewater as a resource for simultaneous pollutant removal and energy recovery. However, most existing wastewater‐to‐hydrogen approaches rely on external electricity, light, or chemical agents, underutilizing mechanical energy and inherent charge complementarity. Here, a piezocatalytic upgrading strategy is developed to couple organic pollutant degradation with hydrogen evolution in a single mechanically driven system. Zinc oxide nanorods serve as the piezoelectric platform, while surface‐engineered silver regulates interfacial charge extraction and directional utilization. Under mechanical excitation, piezoelectric polarization generates complementary charges that drive oxidative pollutant degradation and reductive hydrogen evolution. Using rhodamine B as a model contaminant, the Ag‐modified ZnO nanorods deliver a 90.8% increase in hydrogen yield and a 339% enhancement in degradation kinetics compared to pristine ZnO. Notably, the system demonstrates versatile applicability across various classes of pollutants and real‐water matrices, maintaining efficient upgrading performance under ambient atmosphere and low‐intensity mechanical stirring. Combined experimental and theoretical results reveal that the Ag interface enhances charge separation, water activation, and hydrogen adsorption energetics. This work establishes a dual‐functional piezocatalysis paradigm for scalable wastewater‐to‐hydrogen upgrading.


  • Open Access

    Cognitive-motor dual-task training on gait and balance in stroke patients: meta-analytic report and trial sequential analysis of randomized clinical trials

    by Lu Zhang, Jiangping Ma, Xiaoqing Liu, Aiping Jin, Kai Wang, Xiaobing Yin

    Cognitive-motor dual-tasking training (CMDT) might improve limb function and motor performance in stroke patients. However, is there enough evidence to prove that it is more effective compared with conventional physical single-task training? This meta-analysis and Trial Sequential Analysis of randomized clinical trials (RCTs) aimed to evaluate the effectiveness of CMDT on balance and gait for treating hemiplegic stroke patients. The databases were searched in PubMed, Web of Science, Ovid Database and The Cochrane Library, SinoMed database, Chinese National Knowledge Infrastructure (CNKI), Wan Fang database, and VIP database up to December 8, 2023. The Cochrane-recommended risk of bias (RoB) 2.0 tool was employed to assess risk of bias in trials. The statistical analysis was employed using R version 4.3.2. In addition, subgroup analyses and meta-regression were performed to explore the possible sources of heterogeneity. The evidence for each outcome was evaluated according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. The Copenhagen Trial Unit's Trial Sequential Analysis (version 0.9.5.10 Beta) was used for sequential analysis. Seventeen randomized clinical trials (RCTs) (n = 751 patients) were included. The results demonstrated that cognitive-motor dual-task training (CMDT) might be beneficial on stroke patients on Berg Balance Scale (BBS) (MD = 4.26, 95% CI 1.82, 6.69, p < 0.0001) (low-quality evidence). However, CMDT might not affect Time Up and Go test (TUG) (MD = −1.28, 95% CI −3.63, 1.06, p = 0.284); and single-task walking speed (MD = 1.35, 95% CI −1.56, 4.27, p = 0.413) in stroke patients (low-quality evidence). The Grading of Recommendations Assessment, Development, and Evaluation (GRADE) results indicated that all findings were very low to low certainty. Trial Sequential Analyses demonstrated larger sample sizes are required for confirming our findings. Cognitive-motor dual-task training (CMDT) compared with conventional physical single-task training might be an effective intervention for improving static balance function in stroke patients (low-quality evidence), which should be interpreted cautiously due to heterogeneity and potential biases. Nevertheless, further research is required to support the abovementioned findings. Trial Registration This protocol was registered in PROSPERO (CRD42023490530).