Nan Hua
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Nan Hua has a total of 98 co-authors. Here are the top co-authors by number of shared publications:
Ying Chen
7 shared publicationsJin Huan Pu
6 shared publicationsHua Sheng Wang
5 shared publicationsRong Ji Xu
5 shared publicationsWenxian Zheng
4 shared publicationsBin Zhou
Guangdong University of Technology,School of Integrated Circuits,Guangzhou,PR China
3 shared publications
Latest Publications
- Open Access
Heat Transfer Challenges and Advanced Thermal Management of Thermoelectric Modules and Devices: A Comprehensive Review
Thermoelectric modules enable direct conversion between thermal and electrical energy and offer attractive opportunities for waste-heat recovery, solid-state refrigeration, electronics cooling, renewable energy harvesting, and thermal control. Although considerable progress has been achieved in enhancing the thermoelectric figure of merit of constituent materials, practical device performance is frequently constrained by heat transfer processes occurring within the thermoelectric legs, across material interfaces, and between the module and external heat sources and sinks. This review provides a comprehensive assessment of the heat transfer challenges governing thermoelectric modules and devices and critically evaluates thermal management strategies from the material to system scale. The fundamental coupling among thermoelectric effects, Fourier conduction, and Joule heating processes is first presented, followed by analysis of contradictory thermal requirements, phonon transport, temperature-dependent properties, thermal contact resistance, heat leakage, parasitic losses, temperature nonuniformity, and transient thermal loads. Particular attention is given to advanced heat rejection and heat supply technologies, including optimized finned heat sinks, microchannel heat sinks, jet impingement, heat pipes, vapor chambers, and phase change materials. Emerging approaches involving nanostructured thermal interfaces, additive manufacturing, machine-learning-assisted optimization, and hybrid cooling are critically assessed. The review identifies a transition from component-level thermal-resistance minimization toward integrated material–interface–device–heat-exchanger co-design. Major research needs include transient experimental datasets, physics-informed artificial intelligence, scalable manufacturing, and validation under realistic operating conditions. Future thermoelectric systems will require simultaneous optimization of heat transfer, electrical performance, auxiliary energy consumption, mechanical reliability, manufacturability, and lifecycle performance.
Open AccessHeat Transfer Challenges and Advanced Thermal Management of Thermoelectric Modules and Devices: A Comprehensive Review
Thermoelectric modules enable direct conversion between thermal and electrical energy and offer attractive opportunities for waste-heat recovery, solid-state refrigeration, electronics cooling, renewable energy harvesting, and thermal control. Although considerable progress has been achieved in enhancing the thermoelectric figure of merit of constituent materials, practical device performance is frequently constrained by heat transfer processes occurring within the thermoelectric legs, across material interfaces, and between the module and external heat sources and sinks. This review provides a comprehensive assessment of the heat transfer challenges governing thermoelectric modules and devices and critically evaluates thermal management strategies from the material to system scale. The fundamental coupling among thermoelectric effects, Fourier conduction, and Joule heating processes is first presented, followed by analysis of contradictory thermal requirements, phonon transport, temperature-dependent properties, thermal contact resistance, heat leakage, parasitic losses, temperature nonuniformity, and transient thermal loads. Particular attention is given to advanced heat rejection and heat supply technologies, including optimized finned heat sinks, microchannel heat sinks, jet impingement, heat pipes, vapor chambers, and phase change materials. Emerging approaches involving nanostructured thermal interfaces, additive manufacturing, machine-learning-assisted optimization, and hybrid cooling are critically assessed. The review identifies a transition from component-level thermal-resistance minimization toward integrated material–interface–device–heat-exchanger co-design. Major research needs include transient experimental datasets, physics-informed artificial intelligence, scalable manufacturing, and validation under realistic operating conditions. Future thermoelectric systems will require simultaneous optimization of heat transfer, electrical performance, auxiliary energy consumption, mechanical reliability, manufacturability, and lifecycle performance.
- 25 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 663
Advanced thermal management of LiFePO4 battery modules: A liquid cold plate design via non-uniform heat source topology optimization
- 25 November 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 663
Advanced thermal management of LiFePO4 battery modules: A liquid cold plate design via non-uniform heat source topology optimization
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A study of hotspots of the TSV-RDL interconnect structure
Through the combination of TSV and RDL interconnect lines, TSV serves as one of the core technologies for three-dimensional (3D) integration to enable vertical stacking and signal connection between chips, meeting the increasing demands for higher bandwidth and more functionality in chips. The TSV-RDL interconnect undoubtedly provides a new approach to high-density integration, yet it also brings significant challenges. Thermal management has always been an important research topic in Integrated Circuits (IC), and compared to the traditional planar IC, the 3D stacking of chips undoubtedly exacerbates this issue. The internal metal materials of the TSV-RDL interconnect structure have good thermal conductivity to transfer some of the heat generated by the chip, but the surrounding complex material layers and orders of magnitude differences in dimensions may lead to heat accumulation, causing a local hotspot and structural damage. Therefore, this study will focus on simulating and analyzing the thermal hotspots of the TSV-RDL interconnect under thermal-electric coupling, with brief observations on the distribution of current density and equivalent stress.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
A study of hotspots of the TSV-RDL interconnect structure
Through the combination of TSV and RDL interconnect lines, TSV serves as one of the core technologies for three-dimensional (3D) integration to enable vertical stacking and signal connection between chips, meeting the increasing demands for higher bandwidth and more functionality in chips. The TSV-RDL interconnect undoubtedly provides a new approach to high-density integration, yet it also brings significant challenges. Thermal management has always been an important research topic in Integrated Circuits (IC), and compared to the traditional planar IC, the 3D stacking of chips undoubtedly exacerbates this issue. The internal metal materials of the TSV-RDL interconnect structure have good thermal conductivity to transfer some of the heat generated by the chip, but the surrounding complex material layers and orders of magnitude differences in dimensions may lead to heat accumulation, causing a local hotspot and structural damage. Therefore, this study will focus on simulating and analyzing the thermal hotspots of the TSV-RDL interconnect under thermal-electric coupling, with brief observations on the distribution of current density and equivalent stress.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Effect of Defect Type on Structural Strength and Thermal Properties of Si/Ti, Ti/Au, Ti/Au, and Au/Au Interfaces
With the continuous advancement of chip integration technology, the power density of microelectronic devices has steadily increased, leading to a sharp rise in the internal temperature of the chip. The relative lack of thermal conductivity of conventional solders has seriously hindered the effective heat dissipation from the chip interior to the environment, leading to the intensification of potential thermal reliability problems in the internal structure of advanced packages. Currently, the bonded thermal structure with Ti/Au, Ti/Cu, etc. as the intermediate layer is one of the effective solutions to cope with the problem of high heat flow dissipation inside high-density packages, and it is widely used in Si/Diamond and other structures. However, there are still few in-depth studies on their interfacial reliability. In structural degradation processes such as Si/Diamond, the nature of the structural properties and structures undergoing degradation is the generation and evolution of defects at their bonding and deposition interfaces. The presence of defects leads to the discrepancy between microscopic properties such as the overall electronic structure and the ideal state, thus affecting the macroscopic properties of the material. In order to reveal the effects of different defect types on the strength and properties of bonded interfaces and each deposition interface, the effects of typical point defects on the mechanical strength of the interface as well as the thermal resistance of the interface at Si/Ti, Ti/Au, Ti/Cu, and Au/Au interfaces are analyzed based on the first nature principle and principles of molecular dynamics in the present work, which provides the theoretical basis and design enhancement for the reliability evaluation and design enhancement of the bonded heat dissipation structures using Ti/Au, Ti/Cu, etc. as interlayers. Data support.
- 5 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Effect of Defect Type on Structural Strength and Thermal Properties of Si/Ti, Ti/Au, Ti/Au, and Au/Au Interfaces
With the continuous advancement of chip integration technology, the power density of microelectronic devices has steadily increased, leading to a sharp rise in the internal temperature of the chip. The relative lack of thermal conductivity of conventional solders has seriously hindered the effective heat dissipation from the chip interior to the environment, leading to the intensification of potential thermal reliability problems in the internal structure of advanced packages. Currently, the bonded thermal structure with Ti/Au, Ti/Cu, etc. as the intermediate layer is one of the effective solutions to cope with the problem of high heat flow dissipation inside high-density packages, and it is widely used in Si/Diamond and other structures. However, there are still few in-depth studies on their interfacial reliability. In structural degradation processes such as Si/Diamond, the nature of the structural properties and structures undergoing degradation is the generation and evolution of defects at their bonding and deposition interfaces. The presence of defects leads to the discrepancy between microscopic properties such as the overall electronic structure and the ideal state, thus affecting the macroscopic properties of the material. In order to reveal the effects of different defect types on the strength and properties of bonded interfaces and each deposition interface, the effects of typical point defects on the mechanical strength of the interface as well as the thermal resistance of the interface at Si/Ti, Ti/Au, Ti/Cu, and Au/Au interfaces are analyzed based on the first nature principle and principles of molecular dynamics in the present work, which provides the theoretical basis and design enhancement for the reliability evaluation and design enhancement of the bonded heat dissipation structures using Ti/Au, Ti/Cu, etc. as interlayers. Data support.
- Open Access
- 15 April 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 70
Performance enhancement mechanisms and optimization of multi-pass parallel flow condensers with liquid-vapor separation
- 15 April 2025
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 70
Open AccessPerformance enhancement mechanisms and optimization of multi-pass parallel flow condensers with liquid-vapor separation
- 26 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 62
Superior thermal dissipation performance in diamond on chip structure established under minor pressure at low temperature
- 26 March 2025
- Published by Elsevier in Surfaces and Interfaces
- Vol. 62
Superior thermal dissipation performance in diamond on chip structure established under minor pressure at low temperature
- Top Cited Papers
- 19 October 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 624
Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries
- 19 October 2024
- Published by Elsevier in Journal of Power Sources
- Vol. 624
Top Cited PapersDesign and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries
- 6 September 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 257
The novel stereoscopic cooling plate designs and performance analysis for battery thermal management systems
- 6 September 2024
- Published by Elsevier in Applied Thermal Engineering
- Vol. 257
The novel stereoscopic cooling plate designs and performance analysis for battery thermal management systems
- Open Access
- 27 May 2023
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 2 (3) , 522-531
Dynamic modeling framework for solid-gas sorption systems
- 27 May 2023
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 2 (3) , 522-531
Open AccessDynamic modeling framework for solid-gas sorption systems