Iliyan Ognyanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Iliyan Ognyanov has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Damyan Ganchev
Department of Machine Elements and Non-Metal Constructions, Technical University of Sofia, 1000 Sofia, Bulgaria
2 shared publications - Hristo Konakchiev
Department of Combustion Engines, Automobile Engineering and Transport, Faculty of Transport, Technical University of Sofia, 8 Kliment Ohridski Blvd., 1000 Sofia, Bulgaria
2 shared publications - Iliyan Damyanov
Department of Combustion Engines, Automobile Engineering and Transport, Faculty of Transport, Technical University of Sofia, 8 Kliment Ohridski Blvd., 1000 Sofia, Bulgaria
2 shared publications - Krasimir Georgiev Staykov
Department of Machine Elements and Non-Metal Constructions, Faculty of Mechanical Engineering, Technical University of Sofia, 1000 Sofia, Bulgaria
2 shared publications - Rayna Bryaskova
Department of Polymer Engineering, University of Chemical Technology and Metallurgy, 8 Kliment Ohridsky Str., 1756 Sofia, Bulgaria
2 shared publications - Durhan Saliev
Faculty of Transport, Technical University of Sofia, 8 St Kliment Ohridski, 1756 Sofia, Bulgaria
1 shared publication
Latest Publications
- Open Access
Optimization of Electrospinning Parameters for Bead-Free Morphology of Poly(vinyl alcohol) Nanofibers
Electrospinning is a relatively simple and promising method for producing polymeric, ceramic, and composite fibers, with diameters ranging from several nanometers to several micrometers. In this study, the influence of PVA solution concentration, tip-to-collector distance, and needle gauge at a constant applied voltage on the morphology and diameter of the electrospun fibers was investigated to optimize conditions for the production of bead-free nanofibers. PVA solutions with concentrations of 5, 7.5, and 10 wt.% were electrospun under varying processing conditions, and the resulting fibers were characterized by SEM. The results demonstrated a strong dependence of fiber morphology on polymer concentration. Low-concentration solutions (5 wt.%) produced fibers with significant bead formation, while increasing the concentration to 10 wt.% resulted in smooth and homogeneous fibers. A non-linear dependence of fiber diameter on tip-to-collector distance was observed, with 140 mm identified as the optimal distance for producing the thinnest fibers. Needle gauge also affected fiber morphology and process stability. The G22 needle produced finer fibers at the optimal collector distance of 140 mm, with the narrowest fiber diameter distribution, indicating the highest uniformity, whereas the G20 and G21 needles exhibited the broader distribution. Statistical analysis (ANOVA) confirmed the significance of the investigated parameters. These findings demonstrate that collector distance and needle gauge should not be evaluated independently and provide practical guidance for optimizing electrospinning conditions for the fabrication of uniform, bead-free PVA nanofibers.
Open AccessOptimization of Electrospinning Parameters for Bead-Free Morphology of Poly(vinyl alcohol) Nanofibers
Electrospinning is a relatively simple and promising method for producing polymeric, ceramic, and composite fibers, with diameters ranging from several nanometers to several micrometers. In this study, the influence of PVA solution concentration, tip-to-collector distance, and needle gauge at a constant applied voltage on the morphology and diameter of the electrospun fibers was investigated to optimize conditions for the production of bead-free nanofibers. PVA solutions with concentrations of 5, 7.5, and 10 wt.% were electrospun under varying processing conditions, and the resulting fibers were characterized by SEM. The results demonstrated a strong dependence of fiber morphology on polymer concentration. Low-concentration solutions (5 wt.%) produced fibers with significant bead formation, while increasing the concentration to 10 wt.% resulted in smooth and homogeneous fibers. A non-linear dependence of fiber diameter on tip-to-collector distance was observed, with 140 mm identified as the optimal distance for producing the thinnest fibers. Needle gauge also affected fiber morphology and process stability. The G22 needle produced finer fibers at the optimal collector distance of 140 mm, with the narrowest fiber diameter distribution, indicating the highest uniformity, whereas the G20 and G21 needles exhibited the broader distribution. Statistical analysis (ANOVA) confirmed the significance of the investigated parameters. These findings demonstrate that collector distance and needle gauge should not be evaluated independently and provide practical guidance for optimizing electrospinning conditions for the fabrication of uniform, bead-free PVA nanofibers.
- Open Access
- 19 June 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (6) , 245
Thermo-Tribological Degradation and Lubrication Collapse in a High-Mileage Gasoline Engine: A Real-Engine Case Study
Thermal overload in internal combustion engines may progressively destabilize lubricant-film integrity and promote severe tribological deterioration within highly stressed contact interfaces. This study investigates the thermo-tribological degradation sequence of a high-mileage gasoline engine subjected to prolonged idle operation under impaired cooling conditions, ultimately resulting in engine seizure. The investigated engine had accumulated 356,724 km, while the lubricant had remained in service for approximately 26,724 km prior to the experiment. The post-failure investigation combined teardown inspection, geometrical camshaft assessment, reverse gravimetric reconstruction, hydraulic tappet surface profiling, XRF surface characterization, laboratory oil analysis, and SEM/EDS evaluation of wear debris. The results demonstrated strongly localized degradation concentrated primarily within the cam–tappet interfaces. Severe non-uniform camshaft wear was accompanied by pronounced hydraulic tappet surface damage and evidence of unstable boundary-lubrication conditions. Laboratory oil analysis revealed elevated wear-metal concentrations, depletion of the alkaline reserve, increased oxidation indicators, and a final Class D oil condition assessment. SEM/EDS characterization identified Fe-bearing wear debris associated with sustained material removal and debris recirculation during the final degradation stage. The combined evidence supports a coupled thermo-tribological degradation mechanism involving lubricant deterioration, boundary-lubrication instability, adhesive wear acceleration, oxidative surface degradation, and debris-assisted surface damage preceding final engine seizure. The present case study provides experimentally documented evidence of lubrication collapse under real-engine thermal runaway conditions and highlights the critical role of lubricant condition in maintaining tribological stability under severe thermal loading.
- 19 June 2026
- Published by MDPI AG in Lubricants
- Vol. 14 (6) , 245
Open AccessThermo-Tribological Degradation and Lubrication Collapse in a High-Mileage Gasoline Engine: A Real-Engine Case Study
Thermal overload in internal combustion engines may progressively destabilize lubricant-film integrity and promote severe tribological deterioration within highly stressed contact interfaces. This study investigates the thermo-tribological degradation sequence of a high-mileage gasoline engine subjected to prolonged idle operation under impaired cooling conditions, ultimately resulting in engine seizure. The investigated engine had accumulated 356,724 km, while the lubricant had remained in service for approximately 26,724 km prior to the experiment. The post-failure investigation combined teardown inspection, geometrical camshaft assessment, reverse gravimetric reconstruction, hydraulic tappet surface profiling, XRF surface characterization, laboratory oil analysis, and SEM/EDS evaluation of wear debris. The results demonstrated strongly localized degradation concentrated primarily within the cam–tappet interfaces. Severe non-uniform camshaft wear was accompanied by pronounced hydraulic tappet surface damage and evidence of unstable boundary-lubrication conditions. Laboratory oil analysis revealed elevated wear-metal concentrations, depletion of the alkaline reserve, increased oxidation indicators, and a final Class D oil condition assessment. SEM/EDS characterization identified Fe-bearing wear debris associated with sustained material removal and debris recirculation during the final degradation stage. The combined evidence supports a coupled thermo-tribological degradation mechanism involving lubricant deterioration, boundary-lubrication instability, adhesive wear acceleration, oxidative surface degradation, and debris-assisted surface damage preceding final engine seizure. The present case study provides experimentally documented evidence of lubrication collapse under real-engine thermal runaway conditions and highlights the critical role of lubricant condition in maintaining tribological stability under severe thermal loading.
- Open Access
- 5 May 2026
- Published by MDPI AG in Preprints.org
Optimization of Electrospinning Parameters for Bead-free Morphology of Poly(vinyl alcohol) Nanofibers
Electrospinning is a relatively easy and perspective method for producing polymeric, ceramic, and composite fibers, which may vary from several nanometers to several micrometers. Poly(vinyl alcohol) (PVA) is a water-soluble, non-toxic, and biocompatible polymer with good mechanical properties, making it widely used for electrospinning. In this study, the influence of PVA solution concentration, applied voltage, tip-to-collector distance, and needle size on the morphology and diameter of the obtained fibers was investigated in order to optimize the conditions for the production of bead-free nanofibers. For this purpose, PVA solutions with different concentrations (5, 7.5, and 10 wt.%) were prepared and electrospun by altering the parameters of the process. Fiber morphology and diameter distribution as a function of the studied parameters were evaluated by Scanning electron microscopy (SEM). The results demonstrated a strong dependence of fiber morphology on solution viscosity. At low concentration (5 wt.%), fibers with numerous bead defects were obtained. Increasing the concentration to 7.5 wt.% led to a significant reduction in bead defect. Further increasing the concentration up to 10 wt.% led to the production of smooth and homogeneous fibers under the optimized conditions. A non-linear relationship between fiber diameter and tip-to-collector distance was observed, with an optimal distance of 140 mm yielding the thinnest and most uniform fibers. Additionally, needle diameter was found to influence both fiber size and process stability. Smaller needle diameters (G22) enabled the production of finer fibers (~180 nm), but with increased sensitivity to processing conditions, whereas larger diameters (G20–G21) provided more stable jet behavior and narrower diameter distributions. The statistical analysis ANOVA confirmed these findings. The study provides useful insights for optimizing electrospinning parameters to obtain high-quality, bead-free PVA nanofibers.
- 5 May 2026
- Published by MDPI AG in Preprints.org
Open AccessOptimization of Electrospinning Parameters for Bead-free Morphology of Poly(vinyl alcohol) Nanofibers
Electrospinning is a relatively easy and perspective method for producing polymeric, ceramic, and composite fibers, which may vary from several nanometers to several micrometers. Poly(vinyl alcohol) (PVA) is a water-soluble, non-toxic, and biocompatible polymer with good mechanical properties, making it widely used for electrospinning. In this study, the influence of PVA solution concentration, applied voltage, tip-to-collector distance, and needle size on the morphology and diameter of the obtained fibers was investigated in order to optimize the conditions for the production of bead-free nanofibers. For this purpose, PVA solutions with different concentrations (5, 7.5, and 10 wt.%) were prepared and electrospun by altering the parameters of the process. Fiber morphology and diameter distribution as a function of the studied parameters were evaluated by Scanning electron microscopy (SEM). The results demonstrated a strong dependence of fiber morphology on solution viscosity. At low concentration (5 wt.%), fibers with numerous bead defects were obtained. Increasing the concentration to 7.5 wt.% led to a significant reduction in bead defect. Further increasing the concentration up to 10 wt.% led to the production of smooth and homogeneous fibers under the optimized conditions. A non-linear relationship between fiber diameter and tip-to-collector distance was observed, with an optimal distance of 140 mm yielding the thinnest and most uniform fibers. Additionally, needle diameter was found to influence both fiber size and process stability. Smaller needle diameters (G22) enabled the production of finer fibers (~180 nm), but with increased sensitivity to processing conditions, whereas larger diameters (G20–G21) provided more stable jet behavior and narrower diameter distributions. The statistical analysis ANOVA confirmed these findings. The study provides useful insights for optimizing electrospinning parameters to obtain high-quality, bead-free PVA nanofibers.
- Open Access
- 26 November 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (12) , 1336
Influence of Engine Load on Soot Mass Concentration and Morphology in Diesel Exhaust
This study investigates the relationship between exhaust gas composition, particle number (PN) emissions, and soot microstructure of a 1.9 L compression-ignition engine operated under six controlled steady-state load regimes at 2000 min−1. Unlike standardized transient procedures (e.g., WLTP), the steady-state approach enables isolation and quantification of fundamental thermochemical processes governing soot formation and NOx production, providing engine-out data highly relevant for understanding Euro 7 emission behavior at the source. The novel contributions of this study include (i) a combined macroscopic–microscopic analysis linking PN emissions with SEM/EDS-based soot morphology; (ii) distribution-based estimation of soot mass concentration using experimentally derived primary particle sizes; and (iii) an experimental demonstration of the NOx–soot trade-off across increasing load, supported by microstructural evidence of soot oxidation and agglomeration. The results show a clear decrease in PN concentrations with increasing load (from 1.31 × 107 to 6.4 × 106 cm−3), accompanied by a marked rise in NOx emissions and exhaust temperature. SEM analysis confirms a transition from fine, weakly agglomerated soot structures at low load to more compact, oxidized aggregates at high load. Distribution-based particle sizing (20–80 nm, average ~45 nm) yields soot mass estimates that are consistent with theoretical trends and more accurate than fixed-radius approaches. These findings provide experimentally supported insights into engine-out particulate behavior that complements regulatory PN metrics in Euro 7, offering a mechanistic basis for improved emission control strategies and for interpreting PN-focused regulatory thresholds under real-world operating conditions.
- 26 November 2025
- Published by MDPI AG in Atmosphere
- Vol. 16 (12) , 1336
Open AccessInfluence of Engine Load on Soot Mass Concentration and Morphology in Diesel Exhaust
This study investigates the relationship between exhaust gas composition, particle number (PN) emissions, and soot microstructure of a 1.9 L compression-ignition engine operated under six controlled steady-state load regimes at 2000 min−1. Unlike standardized transient procedures (e.g., WLTP), the steady-state approach enables isolation and quantification of fundamental thermochemical processes governing soot formation and NOx production, providing engine-out data highly relevant for understanding Euro 7 emission behavior at the source. The novel contributions of this study include (i) a combined macroscopic–microscopic analysis linking PN emissions with SEM/EDS-based soot morphology; (ii) distribution-based estimation of soot mass concentration using experimentally derived primary particle sizes; and (iii) an experimental demonstration of the NOx–soot trade-off across increasing load, supported by microstructural evidence of soot oxidation and agglomeration. The results show a clear decrease in PN concentrations with increasing load (from 1.31 × 107 to 6.4 × 106 cm−3), accompanied by a marked rise in NOx emissions and exhaust temperature. SEM analysis confirms a transition from fine, weakly agglomerated soot structures at low load to more compact, oxidized aggregates at high load. Distribution-based particle sizing (20–80 nm, average ~45 nm) yields soot mass estimates that are consistent with theoretical trends and more accurate than fixed-radius approaches. These findings provide experimentally supported insights into engine-out particulate behavior that complements regulatory PN metrics in Euro 7, offering a mechanistic basis for improved emission control strategies and for interpreting PN-focused regulatory thresholds under real-world operating conditions.