MPMariasofia Parisi

Mariasofia Parisi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mariasofia Parisi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    3D-Printed PLA Gyroid Filter Supports: Manufacturing, Mechanical Response and Hydrochar Deposition Screening

    by Mohamed Chairi, Viviana Bressi, Mariasofia Parisi, Tiziana Cappello, Claudia Espro, Guido Di Bella

    This study investigates the design, fabrication, and manufacturing/mechanical characterization of 3D-printed polylactic acid (PLA) cylindrical filter supports developed as substrates for subsequent hydrochar functionalization. Filters with an outer diameter of 30 mm, a height of 20 mm, and a wall thickness of 3 mm were manufactured by material extrusion additive manufacturing and internally filled with gyroid architectures generated in Bambu Studio at three density levels, namely 10%, 15%, and 20%. The printed filters were first evaluated in terms of weight and compressive response. The main focus of the work was the manufacturing consistency and mechanical response of the gyroid supports, while hydrochar deposition was considered as an initial functionalization screening step. The results showed that increasing gyroid density led to higher maximum compressive stress, while mass-normalized analysis revealed a trade-off between absolute mechanical resistance and material efficiency. Surface-treatment screening trials were then carried out on flat PLA specimens to evaluate whether algae-derived hydrochar could be retained on PLA after alkaline activation. Visual and SEM observations showed partial and heterogeneous hydrochar-related surface coverage, with localized agglomerates and partial masking of the original printing lines, but without the formation of a homogeneous coating. EDX analysis of selected agglomerates revealed C and O together with Na, Cl, K, and Ca, supporting the presence of hydrochar-related/mineral-containing deposits on the treated PLA surface, although K may also be associated with residual species from the KOH activation step. FTIR analysis did not reveal clear hydrochar-related spectral features, indicating that FTIR alone was not sufficient to demonstrate effective homogeneous surface functionalization and supporting the interpretation of heterogeneous surface retention. Overall, the study provides a first manufacturing-oriented basis for PLA gyroid filter supports intended for hydrochar deposition and highlights the need for improved surface activation strategies before subsequent functional validation.


  • Open Access

    Multi-Criteria Selection of FFF-Printed Gyroid Sandwich Structures in PLA and PLA–Flax Using AHP–TOPSIS

    by Mariasofia Parisi, Guido Di Bella

    Additive manufacturing enables lightweight sandwich structures with complex cellular cores, but the selection of material and process settings typically involves trade-offs among mechanical performance, cost, and sustainability. This study proposes an integrated multi-criteria decision-making framework to identify the most suitable configuration for Fused Filament Fabrication (FFF) sandwich structures featuring a gyroid triply periodic minimal surface (TPMS) core. Eight alternatives are evaluated by combining two materials (PLA and PLA–Flax biocomposite) with two extrusion temperatures (200 °C and 220 °C) and two infill densities (20% and 30%). Mechanical performance is represented by flexural strength obtained from three-point bending tests reported in a previously published experimental campaign, while economic and environmental indicators are quantified through material cost and printing energy consumption, respectively. Criteria weights are derived using the Analytic Hierarchy Process (AHP) based on expert judgment and consistency-ratio verification, and the alternatives are ranked using the TOPSIS method. The results highlight a clear dominance of PLA-based configurations under the adopted weighting scheme, with PLA printed at 200 °C and 20% infill emerging as the best compromise solution. PLA–Flax options are penalized by higher material cost, higher printing-process energy demand, and lower flexural strength in the investigated conditions. The proposed AHP–TOPSIS workflow supports transparent, data-driven selection of AM process–material combinations for gyroid sandwich structures, and it can be readily extended by including additional sustainability metrics (e.g., CO2-equivalent) and application-specific constraints. A sensitivity analysis under alternative weighting scenarios further confirms the robustness of the obtained ranking.


  • Open Access

    A Review on Reverse Engineering for Sustainable Metal Manufacturing: From 3D Scans to Simulation-Ready Models

    by Elnaeem Abdalla, Simone Panfiglio, Mariasofia Parisi, Guido Di Bella

    Reverse engineering (RE) has been increasingly adopted in metal manufacturing to digitize legacy parts, connect “as-is” geometry to mechanical performance, and enable agile repair and remanufacturing. This review consolidates scan-to-simulation workflows that transform 3D measurement data (optical/laser scanning and X-ray computed tomography) into simulation-ready models for structural assessment and manufacturing decisions, with an explicit focus on sustainability. Key steps are reviewed, from acquisition planning and metrological error sources to point-cloud/mesh processing, CAD/feature reconstruction, and geometry preparation for finite-element analysis (watertightness, defeaturing, meshing strategies, and boundary condition transfer). Special attention is given to uncertainty quantification and the propagation of geometric deviations into stress, stiffness, and fatigue predictions, enabling robust accept/reject and repair/replace choices. Sustainability is addressed through a lightweight reporting framework covering material losses, energy use, rework, and lead time across the scan–model–simulate–manufacture chain, clarifying when digitalization reduces scrap and over-processing. Industrial use cases are discussed for high-value metal components (e.g., molds, turbine blades, and marine/energy parts) where scan-informed simulation supports faster and more reliable decision making. Open challenges are summarized, including benchmark datasets, standardized reporting, automation of feature recognition, and integration with repair process simulation (DED/WAAM) and life-cycle metrics. A checklist is proposed to improve reproducibility and comparability across RE studies.


  • Open Access

    Joining Technologies and Extended Producer Responsibility: A Review on Sustainability and End-of-Life Management of Metal Structures

    by Mariasofia Parisi, Guido Di Bella

    Joining technologies play a decisive role in the sustainability, circularity, and end-of-life performance of metal structures. Despite the increasing emphasis on low-impact manufacturing and Extended Producer Responsibility (EPR), the connection between joining methods and producers’ environmental obligations remains underexplored. This review provides a comprehensive assessment of conventional and emerging techniques, including fusion welding, solid-state welding, mechanical fastening, adhesive bonding, and hybrid and AM-assisted processes, examining how each technology influences material efficiency, durability, repairability, disassembly, and recyclability. Particular attention is devoted to the effects of joint characteristics on life-cycle impacts, waste generation, and the technical and economic feasibility of high-quality material recovery, using recent LCA evidence and industrial case studies from automotive, shipbuilding, aerospace, and consumer products. Building on this analysis, the review proposes qualitative checklists and semi-quantitative scoring schemes to compare joining options under EPR-relevant criteria and to identify best- and worst-case design scenarios. Finally, promising research directions are outlined, including reversible and debond-on-demand solutions, low-energy solid-state routes, joining strategies for multi-material yet recyclable structures, and the integration of digital twins and LCA-informed design tools, offering a roadmap for metal structures that align technical performance with EPR-driven end-of-life management.


  • Open Access

    Influence of Layer Thickness and Extrusion Temperature on the Mechanical Behavior of PLA–Flax TPMS Sandwich Structures Fabricated via Fused Filament Fabrication

    by Gabriele Marabello, Mohamed Chairi, Mariasofia Parisi, Guido Di Bella

    Triply periodic minimal surface (TPMS) sandwich structures made from PLA, reinforced with flax fibers, offer a bio-based approach to lightweight design, but their performance is sensitive to material-extrusion parameters. This study investigates the combined effects of layer height (0.16, 0.24, and 0.28 mm) and extrusion temperature (200, 220 °C) on the flexural behavior of gyroid-core PLA–flax sandwiches. Six parameter combinations were fabricated by fused filament fabrication and tested in three-point bending to obtain flexural strength and strain at failure. Post-fracture optical microscopy related mesostructure and failure mechanisms to macroscopic response. The highest strength (≈23 MPa) was found at 0.28 mm/200 °C, while the greatest strain at failure (≈0.06 mm/mm) occurred at 0.16 mm/200 °C. Two-factor ANOVA showed the significant main and interaction effects of temperature and layer height on both metrics. Fractography revealed a transition from interfacial delamination at lower temperatures and thinner layers to a more localized, cohesive rupture as interlayer bonding improved with higher temperature and thicker layers. Complementary compression tests revealed a core-dominated cellular collapse, with first-collapse stresses ranging from 6.3 to 8.2 MPa and a significant dependence on layer height and temperature (ANOVA). A gate-to-gate sustainability assessment indicated that layer height dominates printing time, energy demand, and CO2 emissions, with 0.28 mm minimizing energy per unit property. Measured part masses were 4–6% below slicer predictions, consistent with typical FFF porosity. The results provide TPMS-specific process windows that balance mechanical performance and energy efficiency for PLA–flax sandwiches.