Fabian Falk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Fabian Falk has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Litsy Hüschelrath
Karlsruhe Institute of Technology, Institute of Microstructure Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen , Germany
2 shared publications- Patrick Wolfgang Doll
Institute of Microstructure Technology, Karlsruher Institut fur Technologie - Campus Nord, Eggenstein-Leopoldshafen, 76344, GERMANY
2 shared publications - Chethala Neelakandhan Shyam Kumar
Nanomaterials and Devices Research Laboratory, Department of Materials Science and Engineering National Institute of Technology Calicut India
1 shared publication - Christian Kübel
Institute of Nanotechnology (INT), Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen, Germany
1 shared publication - Christof Wöll
Institute of Functional Interfaces (IFG) Karlsruhe Institute of Technology (KIT) Eggenstein‐Leopoldshafen Germany
1 shared publication - Dario Mager
Institute of Microstructure Technology, Karlsruhe Institute of Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany
1 shared publication
Latest Publications
- Open Access
- 1 September 2023
- Published by Walter de Gruyter GmbH in Current Directions in Biomedical Engineering
- Vol. 9 (1) , 710-712
Fabrication of biomimetic antibacterial titanium surfaces by hydrothermal oxidation
Within this paper we demonstrate a novel approach to create antibacterial nanostructures on the implant material titanium grade 23 by a high-pressure oxidation method. Titanium samples were oxidized and resulting nanostructures were characterized using scanning electron microscopy and contact angle measurements. Antibacterial properties were tested using Escherichia coli and Bacillus subtilis as common lab strains. In addition, cytotoxicity was determined according to ISO 10993-5 standards. Results reveal that the fabricated nanostructures have similar antibacterial properties known from different insect wings like dragonflies or cicadas and have no cytotoxic effect.
- 1 September 2023
- Published by Walter de Gruyter GmbH in Current Directions in Biomedical Engineering
- Vol. 9 (1) , 710-712
Open AccessFabrication of biomimetic antibacterial titanium surfaces by hydrothermal oxidation
Within this paper we demonstrate a novel approach to create antibacterial nanostructures on the implant material titanium grade 23 by a high-pressure oxidation method. Titanium samples were oxidized and resulting nanostructures were characterized using scanning electron microscopy and contact angle measurements. Antibacterial properties were tested using Escherichia coli and Bacillus subtilis as common lab strains. In addition, cytotoxicity was determined according to ISO 10993-5 standards. Results reveal that the fabricated nanostructures have similar antibacterial properties known from different insect wings like dragonflies or cicadas and have no cytotoxic effect.
- Open Access
- 1 September 2023
- Published by Walter de Gruyter GmbH in Current Directions in Biomedical Engineering
- Vol. 9 (1) , 717-720
Investigation of the antiadhesive properties of biomimetic titanium nanostructures in fluidic flow
Within this work, the bacterial adhesion on biomimetic titanium nanostructures is investigated in fluidic flow. The motile, gram-negative bacteria strain Escherichia coli was used for the experiments and was incubated on nanostructured titanium, polished titanium and on the wings of the dragonfly Neuorbasis kaupi. After incubation period different flow velocities have been applied and the reduction of adhered bacteria was determined via fluorescence microscopy. Results show that nanostructured titanium surfaces have the ability to reduce the bacterial contamination as it is for the dragon fly wings used in this study. This behavior can also be predicted by analyzing the bearing area of the nanotopography which describes the actual part of the topography which is in contact to the bacteria.
- 1 September 2023
- Published by Walter de Gruyter GmbH in Current Directions in Biomedical Engineering
- Vol. 9 (1) , 717-720
Open AccessInvestigation of the antiadhesive properties of biomimetic titanium nanostructures in fluidic flow
Within this work, the bacterial adhesion on biomimetic titanium nanostructures is investigated in fluidic flow. The motile, gram-negative bacteria strain Escherichia coli was used for the experiments and was incubated on nanostructured titanium, polished titanium and on the wings of the dragonfly Neuorbasis kaupi. After incubation period different flow velocities have been applied and the reduction of adhered bacteria was determined via fluorescence microscopy. Results show that nanostructured titanium surfaces have the ability to reduce the bacterial contamination as it is for the dragon fly wings used in this study. This behavior can also be predicted by analyzing the bearing area of the nanotopography which describes the actual part of the topography which is in contact to the bacteria.
- Open Access
- 13 November 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (47) , 53193-53205
Polyaramid-Based Flexible Antibacterial Coatings Fabricated Using Laser-Induced Carbonization and Copper Electroplating
A method for the fabrication of flexible electrical circuits on polyaramid substrates is presented based on laser-induced carbonization followed by copper electroplating. Locally carbonized flexible sheets of polyaramid (Nomex), by laser radiation, create rough and highly porous microstructures that show a higher degree of graphitization than thermally carbonized Nomex sheets. The found recipe for laser-induced carbonization creates conductivities of up to ∼45 S cm–1, thereby exceeding that observed for thermally pyrolyzed materials (∼38 S cm–1) and laser carbon derived from Kapton using the same laser wavelength (∼35 S cm–1). The electrical conductivity of the carbonized tracks was further improved by electroplating with copper. To demonstrate the electrical performance, fabricated circuits were tested and improvement of the sheet resistance was determined. Copper films exhibit antimicrobial activity and were used to fabricate customized flexible antibacterial coatings. The integration of laser carbonization and electroplating technologies in a polyaramid substrate points to the development of customized circuit designs for smart textiles operating in high-temperature environments.
- 13 November 2020
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 12 (47) , 53193-53205
Open AccessPolyaramid-Based Flexible Antibacterial Coatings Fabricated Using Laser-Induced Carbonization and Copper Electroplating
A method for the fabrication of flexible electrical circuits on polyaramid substrates is presented based on laser-induced carbonization followed by copper electroplating. Locally carbonized flexible sheets of polyaramid (Nomex), by laser radiation, create rough and highly porous microstructures that show a higher degree of graphitization than thermally carbonized Nomex sheets. The found recipe for laser-induced carbonization creates conductivities of up to ∼45 S cm–1, thereby exceeding that observed for thermally pyrolyzed materials (∼38 S cm–1) and laser carbon derived from Kapton using the same laser wavelength (∼35 S cm–1). The electrical conductivity of the carbonized tracks was further improved by electroplating with copper. To demonstrate the electrical performance, fabricated circuits were tested and improvement of the sheet resistance was determined. Copper films exhibit antimicrobial activity and were used to fabricate customized flexible antibacterial coatings. The integration of laser carbonization and electroplating technologies in a polyaramid substrate points to the development of customized circuit designs for smart textiles operating in high-temperature environments.