Lilian Domínguez-Palmero

We present the architecture, implementation, and on-sky validation of the fully automated acquisition and guiding system (AG) developed for the WEAVE instrument on the William Herschel Telescope. The AG operates in two distinct modes, corresponding to the observing modes of WEAVE. For the large integral field unit, an off-axis imaging guider is used, for which we have devised an automatic acquisition method based on pattern recognition of stellar asterisms matched against Gaia predictions. For the multi-object spectrograph and the mini-integral field units, a multifibre guider uses up to eight coherent image guide fibre bundles to derive and apply continuous corrections in azimuth, altitude, and rotation. The system performs complete astrometric calculations, including atmospheric differential refraction and instrument flexure, for each guide frame, enabling accurate target placement and stable closed-loop guiding in all configurations. To support development, commissioning, and operational validation, we have also built a high-fidelity simulation mode that reproduces the behaviour of the telescope control system and of the AG cameras, and we release the standalone camera simulator as open-source software. Using two years of routine WEAVE operations spanning commissioning and early survey phases, we present a statistically robust characterization of AG performance, demonstrating that both modes meet design requirements and are ready for sustained survey operations.

Current-day multi-object spectroscopic surveys are often limited in their ability to observe bright stars due to their low surface densities, resulting in increased observational overheads and reduced efficiency. Addressing this, we have developed a novel observing mode for WEAVE (William Herschel Telescope Enhanced Area Velocity Explorer) that enables efficient observations of low-surface-density target fields without incurring additional overheads from calibration exposures. As a pilot for the new mode, we introduce the WEAVE-TwiLight-Survey (WTLS), focusing on bright exoplanet-host stars and their immediate surroundings on the sky. High observational efficiency is achieved by superimposing multiple low-target-density fields and allocating the optical fibres in this configuration. We use a heuristic method to define fields relative to a central guide star, which serves as a reference for their superposition. Suitable guide fibres for each merged configuration are selected using a custom algorithm. Test observations have been carried out, demonstrating the feasibility of the new observing mode. We show that merged field configurations can be observed with WEAVE using the proposed method. The approach minimizes calibration times and opens twilight hours to WEAVE's operational schedule. WTLS is built upon the new observing mode and sourced from the ESA PLATO long-duration-phase fields. This survey will result in a homogeneous catalogue of approximately 6300 bright stars, including 62 known planet hosts, laying the groundwork for future elemental abundance studies tracing chemical patterns of planetary formation. This new observing mode (WEAVE-Tumble-Less) expands WEAVE's capabilities to rarely used on-sky time and low-density field configurations without sacrificing efficiency.

Current-day multi-object spectroscopic surveys are often limited in their ability to observe bright stars due to their low surface densities, resulting in increased observational overheads and reduced efficiency. Addressing this, we have developed a novel observing mode for WEAVE (William Herschel Telescope Enhanced Area Velocity Explorer) that enables efficient observations of low-surface-density target fields without incurring additional overheads from calibration exposures. As a pilot for the new mode, we introduce the WEAVE-TwiLight-Survey (WTLS), focusing on bright exoplanet-host stars and their immediate surroundings on the sky. High observational efficiency is achieved by superimposing multiple low-target-density fields and allocating the optical fibres in this configuration. We use a heuristic method to define fields relative to a central guide star, which serves as a reference for their superposition. Suitable guide fibres for each merged configuration are selected using a custom algorithm. Test observations have been carried out, demonstrating the feasibility of the new observing mode. We show that merged field configurations can be observed with WEAVE using the proposed method. The approach minimizes calibration times and opens twilight hours to WEAVE’s operational schedule. WTLS is built upon the new observing mode and sourced from the ESA PLATO long-duration-phase fields. This survey will result in a homogeneous catalogue of ∼6300 bright stars, including 62 known planet hosts, laying the groundwork for future elemental abundance studies tracing chemical patterns of planetary formation. This new observing mode (WEAVE-Tumble-Less) expands WEAVE’s capabilities to rarely used on-sky time and low-density field configurations without sacrificing efficiency.