Tetiana Halko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tetiana Halko has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Oleksandr Miroshnyk
State Biotechnological University
3 shared publications - Taras Shchur
State Biotechnological University
3 shared publications - Serhii Halko
Department of Electrical Engineering and Electromechanics Named after Prof. V.V. Ovharov , Dmytro Motornyi Tavria State Agrotechnological University Zaporizhia , Ukraine , Ukraine
2 shared publications - Олександр Анатолійович Савченко
Державний біотехнологічний університет
2 shared publications - Alena Dyadenchuk
Dmytro Motornyi Tavria State Agrotechnological University, Melitopol, Ukraine
1 shared publication - Andrii Sabo
Department of Electrical Engineering and Electromechanics Named after Prof. V.V. Ovharov Dmytro Motornyi Tavria State Agrotechnological University Zaporizhia , Ukraine
1 shared publication
Latest Publications
- Open Access
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3329 (1) , 012005
Modeling and optimization of rural distribution networks with solar power plants and energy storage systems
This paper addresses the modeling and optimization of operating modes of rural distribution networks integrated with solar power plants (SPPs) and energy storage systems (ESS). The relevance of the study is determined by the increasing penetration of renewable energy sources, the need to enhance energy security, and the requirement to ensure reliable electricity supply for rural consumers under unstable grid conditions. The aim of the research is to develop a mathematical modeling approach for a local distribution network with integrated SPP and ESS and to determine efficient charge–discharge control strategies for reducing peak loads, minimizing power losses, and increasing the level of energy autonomy. The study applies simulation-based modeling methods, generation forecasting using meteorological data, and mathematical optimization techniques to form optimal ESS operating schedules. The results demonstrate that the integration of ESS into rural distribution networks significantly reduces load fluctuations, increases self-consumption of locally generated electricity, decreases grid power exchange, and improves overall system stability. Technical and economic performance indicators of ESS implementation for rural facilities, including pumping stations and agricultural loads, are evaluated.
- 1 September 2026
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 3329 (1) , 012005
Open AccessModeling and optimization of rural distribution networks with solar power plants and energy storage systems
This paper addresses the modeling and optimization of operating modes of rural distribution networks integrated with solar power plants (SPPs) and energy storage systems (ESS). The relevance of the study is determined by the increasing penetration of renewable energy sources, the need to enhance energy security, and the requirement to ensure reliable electricity supply for rural consumers under unstable grid conditions. The aim of the research is to develop a mathematical modeling approach for a local distribution network with integrated SPP and ESS and to determine efficient charge–discharge control strategies for reducing peak loads, minimizing power losses, and increasing the level of energy autonomy. The study applies simulation-based modeling methods, generation forecasting using meteorological data, and mathematical optimization techniques to form optimal ESS operating schedules. The results demonstrate that the integration of ESS into rural distribution networks significantly reduces load fluctuations, increases self-consumption of locally generated electricity, decreases grid power exchange, and improves overall system stability. Technical and economic performance indicators of ESS implementation for rural facilities, including pumping stations and agricultural loads, are evaluated.
- Open Access
- 18 May 2026
- Published by Publishing House Helvetica (Publications) in Scientific bulletin of the Tavria State Agrotechnological University
- Vol. 16 (1) , 218-227
ДОСЛІДЖЕННЯ ЕФЕКТИВНОСТІ ЗАСТОСУВАННЯ МІКРОПРОЦЕСОРНОГО ПРИСТРОЮ РС83-В1 КОМПАНІЇ «РЗА СИСТЕМЗ» ДЛЯ МОНІТОРИНГУ АВАРІЙНИХ РЕЖИМІВ МЕРЕЖ 6–10 КВ
У статті виконано аналітичне дослідження мікропроцесорного пристрою релейного захисту та автоматики РС83-В1, розробленого компанією «РЗА СИСТЕМЗ». Описано особливості застосування мікро- процесорного пристрою релейного захисту за напругою РС83-В1 для підвищення ефективності моніторингу аварійних режимів повітряних ліній електропередачі 6–10 кВ. Проведено порівняльний аналіз технічних характеристик сучасного цифрового термінала та традиційних електромеханічних реле. Виконано техніко- економічне обґрунтування доцільності модернізації систем захисту за напругою з огляду на зниження експлуатаційних витрат та зменшення часу ліквідації аварій. Стаття містить детальний опис практичних рекомендацій щодо використання пристрою у конкретних умовах експлуатації.
- 18 May 2026
- Published by Publishing House Helvetica (Publications) in Scientific bulletin of the Tavria State Agrotechnological University
- Vol. 16 (1) , 218-227
Open AccessДОСЛІДЖЕННЯ ЕФЕКТИВНОСТІ ЗАСТОСУВАННЯ МІКРОПРОЦЕСОРНОГО ПРИСТРОЮ РС83-В1 КОМПАНІЇ «РЗА СИСТЕМЗ» ДЛЯ МОНІТОРИНГУ АВАРІЙНИХ РЕЖИМІВ МЕРЕЖ 6–10 КВ
У статті виконано аналітичне дослідження мікропроцесорного пристрою релейного захисту та автоматики РС83-В1, розробленого компанією «РЗА СИСТЕМЗ». Описано особливості застосування мікро- процесорного пристрою релейного захисту за напругою РС83-В1 для підвищення ефективності моніторингу аварійних режимів повітряних ліній електропередачі 6–10 кВ. Проведено порівняльний аналіз технічних характеристик сучасного цифрового термінала та традиційних електромеханічних реле. Виконано техніко- економічне обґрунтування доцільності модернізації систем захисту за напругою з огляду на зниження експлуатаційних витрат та зменшення часу ліквідації аварій. Стаття містить детальний опис практичних рекомендацій щодо використання пристрою у конкретних умовах експлуатації.
- Open Access
- 1 January 2026
- Published by Walter de Gruyter GmbH in System Safety: Human - Technical Facility - Environment
- Vol. 8 (1) , 128-138
Impact of Different Parameters on the Efficiency of GaN/Porous-GaAs/GaAs Solar Cell
Modern requirements for high-efficiency solar cells increase interest in the development of new materials and structures, in particular the use of GaN/porous-GaAs/GaAs composite materials and heterostructures, which allow to improve the efficiency and stability of solar energy conversion. To determine the photovoltaic characteristics of the GaN/porous-GaAs/GaAs photoconverter, a system of equations is used, including the Poisson equation, the diffusion equation, and the charge conservation equation. The simulation results of GaN/porous-GaAs/GaAs solar cells using PC1D software showed values of short-circuit current I SC = 33.2 mA, open-circuit voltage V OC = 1.022 V, fill factor FF = 83.4% and efficiency η = 28.3% In order to optimize the parameters of the solar cell, simulations were carried out with a change in the thickness of the GaN layer, the doping levels of the GaN and porous-GaAs layers. It was established that with a thickness of the GaN layer of 1.6 μm, the efficiency of the solar cell reaches a maximum value of 29.1%. The maximum efficiency was achieved when the GaN layer was doped with 1·10 17 cm −3 and was 28.4%. An increase in the temperature of the solar cell leads to a decrease in the open-circuit voltage and an increase in recombination losses, which is reflected in the decrease in the efficiency of the GaN/porous-GaAs/GaAs photoconverter from 29.8% at 270 K to 23.0% at 370 K.
- 1 January 2026
- Published by Walter de Gruyter GmbH in System Safety: Human - Technical Facility - Environment
- Vol. 8 (1) , 128-138
Open AccessImpact of Different Parameters on the Efficiency of GaN/Porous-GaAs/GaAs Solar Cell
Modern requirements for high-efficiency solar cells increase interest in the development of new materials and structures, in particular the use of GaN/porous-GaAs/GaAs composite materials and heterostructures, which allow to improve the efficiency and stability of solar energy conversion. To determine the photovoltaic characteristics of the GaN/porous-GaAs/GaAs photoconverter, a system of equations is used, including the Poisson equation, the diffusion equation, and the charge conservation equation. The simulation results of GaN/porous-GaAs/GaAs solar cells using PC1D software showed values of short-circuit current I SC = 33.2 mA, open-circuit voltage V OC = 1.022 V, fill factor FF = 83.4% and efficiency η = 28.3% In order to optimize the parameters of the solar cell, simulations were carried out with a change in the thickness of the GaN layer, the doping levels of the GaN and porous-GaAs layers. It was established that with a thickness of the GaN layer of 1.6 μm, the efficiency of the solar cell reaches a maximum value of 29.1%. The maximum efficiency was achieved when the GaN layer was doped with 1·10 17 cm −3 and was 28.4%. An increase in the temperature of the solar cell leads to a decrease in the open-circuit voltage and an increase in recombination losses, which is reflected in the decrease in the efficiency of the GaN/porous-GaAs/GaAs photoconverter from 29.8% at 270 K to 23.0% at 370 K.
- Open Access
- 1 December 2025
- Published by Walter de Gruyter GmbH in System Safety: Human - Technical Facility - Environment
- Vol. 7 (1) , 453-464
Usage of a Virtual Electrical Enterprise as Means for the Future Power Engineer Practical Training
In the context of an increase in the share of distance learning the educational institutions that train specialists in the field of power generation, use and supply are faced with certain difficulties in conducting practical training for students. This article discusses the features and stages of creating virtual enterprises as a tool for the practical training of future power engineers. The authors propose a scalable and adaptive solution: the implementation of a “Virtual Electrical Enterprise” using virtual reality (VR) technologies and specialized software for immersive and interactive practical training. The system simulates various departments of a real production enterprise and allows students to perform professional tasks in a controlled virtual environment. A partial experimental evaluation was conducted to evaluate the effectiveness of this approach, demonstrating improved learning outcomes, heightened student interest, and the potential to compensate for limited access to real industrial equipment. The proposed system not only enhances student preparedness for future employment but also offers prospects for lifelong learning and closer collaboration between universities and industrial enterprises. Future work involves the progressive implementation of this concept into the educational process for electrical engineering students
- 1 December 2025
- Published by Walter de Gruyter GmbH in System Safety: Human - Technical Facility - Environment
- Vol. 7 (1) , 453-464
Open AccessUsage of a Virtual Electrical Enterprise as Means for the Future Power Engineer Practical Training
In the context of an increase in the share of distance learning the educational institutions that train specialists in the field of power generation, use and supply are faced with certain difficulties in conducting practical training for students. This article discusses the features and stages of creating virtual enterprises as a tool for the practical training of future power engineers. The authors propose a scalable and adaptive solution: the implementation of a “Virtual Electrical Enterprise” using virtual reality (VR) technologies and specialized software for immersive and interactive practical training. The system simulates various departments of a real production enterprise and allows students to perform professional tasks in a controlled virtual environment. A partial experimental evaluation was conducted to evaluate the effectiveness of this approach, demonstrating improved learning outcomes, heightened student interest, and the potential to compensate for limited access to real industrial equipment. The proposed system not only enhances student preparedness for future employment but also offers prospects for lifelong learning and closer collaboration between universities and industrial enterprises. Future work involves the progressive implementation of this concept into the educational process for electrical engineering students
- Open Access
- 25 November 2025
- Published by Publishing House Helvetica (Publications) in PROCEEDINGS OF TAVRIA STATE AGROTECHNOLOGICAL UNIVERSITY
- Vol. 25 (3) , 10-18
МАТЕМАТИЧНА ОБРОБКА ПАРАМЕТРІВ МАГНІТНОГО ПОЛЯ ІНДУКЦІЙНИХ ВІТРОЕЛЕКТРОМЕХАНІЧНИХ НАГРІВАЧІВ
Для безпосереднього перетворення енергії вітру на теплову розроблено і запатентовано проточний індукційний вітроелектромеханічний нагрівач, принцип роботи та експериментальні дослідження опубліковано авторами раніше. Нагрівач рекомендується для використання в системах гарячого водопостачання невеликих приватних домогосподарств із метою енергозбереження традиційних джерел енергії.Для обґрунтування параметрів магнітної системи нагрівача розроблено макет зубчатої магнітної системи і приведено результати експериментальних досліджень електромагнітних величин у повітряному прошарку системи. Виконано математичну обробку результатів експериментальних досліджень. Запропоновано спосіб побудови багатомірних поверхонь із використанням поліному Лагранжа з однією змінною для розрахунків електромагнітних величин у повітряному прошарку подібних зубчатих магнітних систем, а також під час побудови поверхонь відгуку у багатофакторних експериментах. Наведені експериментальні та розрахункові дані показали високу кореляцію між собою.
- 25 November 2025
- Published by Publishing House Helvetica (Publications) in PROCEEDINGS OF TAVRIA STATE AGROTECHNOLOGICAL UNIVERSITY
- Vol. 25 (3) , 10-18
Open AccessМАТЕМАТИЧНА ОБРОБКА ПАРАМЕТРІВ МАГНІТНОГО ПОЛЯ ІНДУКЦІЙНИХ ВІТРОЕЛЕКТРОМЕХАНІЧНИХ НАГРІВАЧІВ
Для безпосереднього перетворення енергії вітру на теплову розроблено і запатентовано проточний індукційний вітроелектромеханічний нагрівач, принцип роботи та експериментальні дослідження опубліковано авторами раніше. Нагрівач рекомендується для використання в системах гарячого водопостачання невеликих приватних домогосподарств із метою енергозбереження традиційних джерел енергії.Для обґрунтування параметрів магнітної системи нагрівача розроблено макет зубчатої магнітної системи і приведено результати експериментальних досліджень електромагнітних величин у повітряному прошарку системи. Виконано математичну обробку результатів експериментальних досліджень. Запропоновано спосіб побудови багатомірних поверхонь із використанням поліному Лагранжа з однією змінною для розрахунків електромагнітних величин у повітряному прошарку подібних зубчатих магнітних систем, а також під час побудови поверхонь відгуку у багатофакторних експериментах. Наведені експериментальні та розрахункові дані показали високу кореляцію між собою.