Zhiqiang Chen
Research Subjects
Zhiqiang Chen has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Kangyao Zhang
School of Advanced Manufacturing, Fuzhou University, Quanzhou 362251, China
4 shared publications - Ye He
Department of Health Inspection and Quarantine, School of Public Health, Fujian Medical University, Fuzhou, China
2 shared publications - Chen Zhang
School of Materials and Chemistry Engineering, Minjiang University, Fuzhou 350108, China
1 shared publication - Jinchao You
School of Public Health, Fujian Medical University, Fuzhou 350108, China
1 shared publication - Lina Zheng
Department of Health Inspection and Quarantine, School of Public Health, Fujian Medical University, Fuzhou 350122, China
1 shared publication - Tian Shen
Department of Health Inspection and Quarantine, School of Public Health, Fujian Medical University, Fuzhou 350122, China
1 shared publication
Latest Publications
- Open Access
- 5 November 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (11) , 635
Fluorescent Sensing of Ferric Ions in Water Using Hydrothermally Derived Cu-Doped Dual-Emissive Carbon Dots
Iron is an important parameter in environmental water analysis, where its concentration strongly influences water quality and environmental behavior, thus necessitating its detection in aqueous samples. Herein, we report a simple, label-free fluorescent sensing platform based on copper-doped dual-emission carbon dots (CuCDs) for the rapid and quantitative detection of Fe3+ in aqueous media. CuCDs were synthesized via a one-step hydrothermal method using Cu (NO3)2·3H2O and tryptamine (C10H12N2) as precursors at 180 °C for 6 h. The resulting CuCDs exhibited two characteristic emission peaks at 336 nm and 395 nm under 290 nm excitation, and their fluorescence was selectively quenched by Fe3+. Under optimized conditions (MES buffer, pH 5, 60 °C, 10 min reaction time), the fluorescence intensity ratio (F0/F) showed a linear correlation with Fe3+ concentration in the range of 20–700 μM at both emission wavelengths, yielding limits of detection of 11.68 μM (336 nm) and 10.07 μM (395 nm). The sensor demonstrated good selectivity against eleven common coexisting metal ions at 100-fold concentrations. Practical applicability was validated through spiked recovery assays in Min River water samples, achieving recoveries of 84.4–119.5% with results consistent with those obtained via standard atomic absorption spectrometry. The method offers low cost, a 10 min response time, and operational simplicity, providing a proof-of-concept basis for environmental water screening and future portable implementation.
- 5 November 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (11) , 635
Open AccessFluorescent Sensing of Ferric Ions in Water Using Hydrothermally Derived Cu-Doped Dual-Emissive Carbon Dots
Iron is an important parameter in environmental water analysis, where its concentration strongly influences water quality and environmental behavior, thus necessitating its detection in aqueous samples. Herein, we report a simple, label-free fluorescent sensing platform based on copper-doped dual-emission carbon dots (CuCDs) for the rapid and quantitative detection of Fe3+ in aqueous media. CuCDs were synthesized via a one-step hydrothermal method using Cu (NO3)2·3H2O and tryptamine (C10H12N2) as precursors at 180 °C for 6 h. The resulting CuCDs exhibited two characteristic emission peaks at 336 nm and 395 nm under 290 nm excitation, and their fluorescence was selectively quenched by Fe3+. Under optimized conditions (MES buffer, pH 5, 60 °C, 10 min reaction time), the fluorescence intensity ratio (F0/F) showed a linear correlation with Fe3+ concentration in the range of 20–700 μM at both emission wavelengths, yielding limits of detection of 11.68 μM (336 nm) and 10.07 μM (395 nm). The sensor demonstrated good selectivity against eleven common coexisting metal ions at 100-fold concentrations. Practical applicability was validated through spiked recovery assays in Min River water samples, achieving recoveries of 84.4–119.5% with results consistent with those obtained via standard atomic absorption spectrometry. The method offers low cost, a 10 min response time, and operational simplicity, providing a proof-of-concept basis for environmental water screening and future portable implementation.
- Open Access
Developing an Aptamer-Based Colorimetric Method for Highly Specific Discrimination of Hg2+ and MeHg
Highly toxic inorganic mercury (Hg2+) and methylmercury (MeHg) are widespread heavy metal pollutants that negatively affect human health and ecosystems. Thus, developing a method for the rapid, facile, and visual detection of Hg2+ and MeHg to prevent mercury poisoning is urgent and challenging. In this study, a colorimetric biosensor using a thymine-rich (T-rich) HT9 deoxyribonucleic acid (DNA) aptamer serving as a recognition probe (RP) labeled with a thiol group (-SH) and poly diallyldimethyl ammonium chloride (PDDAC)-coated gold nanorods (AuNRs) as a signal probe (SP) was developed for the specific detection of Hg2+ and MeHg. In the presence of Hg2+, Ag0/Hg0 amalgam nanoparticles (ANPs) were formed and bound to the HT9 DNA aptamer, producing a light lavender color. Due to its stronger binding ability, MeHg showed priority binding to the HT9 DNA aptamer, yet reduced Ag0 NPs were deposited on the surface of PDDAC-coated AuNRs. Interestingly, this produced a color ranging from olive to atrovirens. The method exhibited a good linear relationship in ranges of 0.30–1.00 μM and 0.50–5.00 μM for Hg2+ and MeHg, respectively, with corresponding visual limits of detection (LODs) of 0.30 μM (for Hg2+) and 0.50 μM (for MeHg). Their theoretical LODs (3σ/S) were calculated to be 0.071 μM (for Hg2+) and 0.12 μM (for MeHg). The method used in this work was successfully applied to the colorimetric detection of Hg2+ and MeHg in real seawater samples, with a recovery (Rec.) of 98–107% and a relative standard deviation (RSD, n = 6) ≤ 8%. This method provides a useful technical reference for the semi-quantitative determination of Hg2+ and MeHg in drinking water and aquatic products, especially in the case of accident-level contamination.
Open AccessDeveloping an Aptamer-Based Colorimetric Method for Highly Specific Discrimination of Hg2+ and MeHg
Highly toxic inorganic mercury (Hg2+) and methylmercury (MeHg) are widespread heavy metal pollutants that negatively affect human health and ecosystems. Thus, developing a method for the rapid, facile, and visual detection of Hg2+ and MeHg to prevent mercury poisoning is urgent and challenging. In this study, a colorimetric biosensor using a thymine-rich (T-rich) HT9 deoxyribonucleic acid (DNA) aptamer serving as a recognition probe (RP) labeled with a thiol group (-SH) and poly diallyldimethyl ammonium chloride (PDDAC)-coated gold nanorods (AuNRs) as a signal probe (SP) was developed for the specific detection of Hg2+ and MeHg. In the presence of Hg2+, Ag0/Hg0 amalgam nanoparticles (ANPs) were formed and bound to the HT9 DNA aptamer, producing a light lavender color. Due to its stronger binding ability, MeHg showed priority binding to the HT9 DNA aptamer, yet reduced Ag0 NPs were deposited on the surface of PDDAC-coated AuNRs. Interestingly, this produced a color ranging from olive to atrovirens. The method exhibited a good linear relationship in ranges of 0.30–1.00 μM and 0.50–5.00 μM for Hg2+ and MeHg, respectively, with corresponding visual limits of detection (LODs) of 0.30 μM (for Hg2+) and 0.50 μM (for MeHg). Their theoretical LODs (3σ/S) were calculated to be 0.071 μM (for Hg2+) and 0.12 μM (for MeHg). The method used in this work was successfully applied to the colorimetric detection of Hg2+ and MeHg in real seawater samples, with a recovery (Rec.) of 98–107% and a relative standard deviation (RSD, n = 6) ≤ 8%. This method provides a useful technical reference for the semi-quantitative determination of Hg2+ and MeHg in drinking water and aquatic products, especially in the case of accident-level contamination.
- Open Access
- 23 October 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (11) , 599
Bisphenol A and Mercury: Application, Toxicity and Detection by Functional Nanomaterial-Enhanced DNA Biosensors
Bisphenol A (BPA) and mercury are two types of important food contaminants that also cause severe and irreversible damage to ecosystems and human health. Therefore, it is necessary to provide a comprehensive summary of their industrial applications, toxicity hazards, restrictive measures and detection methods. This review introduces the wide range of applications of BPA and mercury in industrial production and daily life, as well as the accompanying environmental pollution problems. The toxicity and mechanisms of action of BPA and mercury are herein presented. Although countries around the world have taken relevant measures to ensure the safe use of products and safe food consumption, the risk of their poisoning still exists. Focused on subsequent technical prevention, this review summarizes several common sample pretreatment methods, enabling the determination of the true BPA or mercury content and eventually improving detection accuracy. Four types of functional nanomaterial (FNM)-enhanced DNA biosensors are primarily discussed in this review for the highly selective and sensitive determination of BPA and mercury using mainstream colorimetric, electrochemical, fluorescence and surface-enhanced Raman scattering (SERS) methods, as well as other methods. This review also analyzes the existing issues in the development of sample pretreatment and detection methods based on FNM-enhanced DNA biosensors and discusses future direction prospects with the help of the latest cutting-edge technologies such as wearable smart devices, artificial intelligence and big data.
- 23 October 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (11) , 599
Open AccessBisphenol A and Mercury: Application, Toxicity and Detection by Functional Nanomaterial-Enhanced DNA Biosensors
Bisphenol A (BPA) and mercury are two types of important food contaminants that also cause severe and irreversible damage to ecosystems and human health. Therefore, it is necessary to provide a comprehensive summary of their industrial applications, toxicity hazards, restrictive measures and detection methods. This review introduces the wide range of applications of BPA and mercury in industrial production and daily life, as well as the accompanying environmental pollution problems. The toxicity and mechanisms of action of BPA and mercury are herein presented. Although countries around the world have taken relevant measures to ensure the safe use of products and safe food consumption, the risk of their poisoning still exists. Focused on subsequent technical prevention, this review summarizes several common sample pretreatment methods, enabling the determination of the true BPA or mercury content and eventually improving detection accuracy. Four types of functional nanomaterial (FNM)-enhanced DNA biosensors are primarily discussed in this review for the highly selective and sensitive determination of BPA and mercury using mainstream colorimetric, electrochemical, fluorescence and surface-enhanced Raman scattering (SERS) methods, as well as other methods. This review also analyzes the existing issues in the development of sample pretreatment and detection methods based on FNM-enhanced DNA biosensors and discusses future direction prospects with the help of the latest cutting-edge technologies such as wearable smart devices, artificial intelligence and big data.
- Open Access
- 14 April 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (4) , 218
The Label-Free Fluorescence Detection of Inorganic and Organic Mercury Based on DNA-Templated Gold Nanoclusters
Heavy metal mercury is one of the most significant and toxic environmental contaminants. Its inorganic form (Hg2+) and organic form (organic mercury, OrHg) can cause irreversible harm to human health and the ecological environment, and the latter is particularly prone to bioaccumulation and bioamplification in the food chain. Therefore, there is an urgent need for a rapid, reliable and specific detection of Hg2+ and OrHg to evaluate the potential risk for human health. Here, a novel label-free fluorescent sensing platform based on ssDNA aptamer (AA-T7)-templated AuNCs was established for sensitive recognition and specific detection of Hg2+ and OrHg. In the presence of OrHg, the fluorescence of pure AA-T7-templated AuNCs was visibly enhanced through forming Ag/AuNCs based on Ag0-doped AIEE effect. However, they were obviously quenched because of generating non-fluorescent Au/Ag/Hg ANPs via metallophilic interactions among Au3+, Ag+, and Hg2+ (5d10-4d10-5d10) when only Hg2+ existed. This fluorescent sensing platform could detect as low as 20.0 nM (4.0 ng Hg/g) and has a good linear detection range, with target concentrations ranging from 0.25 μM to 2.00 μM, recoveries of 98.0–108.0%, and RSD ≤ 5.0%. Low-toxic AA-T7-templated AuNCs could be used for cytotoxicity analysis and intracellular fluorescent imaging. The method has been successfully applied to the determination of Hg2+ and OrHg in tap water, seawater and dried golden pomfret fish muscle samples, demonstrating promising prospects for the assay of mercury species in environmental samples and aquatic products to ensure human health and food safety.
- 14 April 2026
- Published by MDPI AG in Biosensors
- Vol. 16 (4) , 218
Open AccessThe Label-Free Fluorescence Detection of Inorganic and Organic Mercury Based on DNA-Templated Gold Nanoclusters
Heavy metal mercury is one of the most significant and toxic environmental contaminants. Its inorganic form (Hg2+) and organic form (organic mercury, OrHg) can cause irreversible harm to human health and the ecological environment, and the latter is particularly prone to bioaccumulation and bioamplification in the food chain. Therefore, there is an urgent need for a rapid, reliable and specific detection of Hg2+ and OrHg to evaluate the potential risk for human health. Here, a novel label-free fluorescent sensing platform based on ssDNA aptamer (AA-T7)-templated AuNCs was established for sensitive recognition and specific detection of Hg2+ and OrHg. In the presence of OrHg, the fluorescence of pure AA-T7-templated AuNCs was visibly enhanced through forming Ag/AuNCs based on Ag0-doped AIEE effect. However, they were obviously quenched because of generating non-fluorescent Au/Ag/Hg ANPs via metallophilic interactions among Au3+, Ag+, and Hg2+ (5d10-4d10-5d10) when only Hg2+ existed. This fluorescent sensing platform could detect as low as 20.0 nM (4.0 ng Hg/g) and has a good linear detection range, with target concentrations ranging from 0.25 μM to 2.00 μM, recoveries of 98.0–108.0%, and RSD ≤ 5.0%. Low-toxic AA-T7-templated AuNCs could be used for cytotoxicity analysis and intracellular fluorescent imaging. The method has been successfully applied to the determination of Hg2+ and OrHg in tap water, seawater and dried golden pomfret fish muscle samples, demonstrating promising prospects for the assay of mercury species in environmental samples and aquatic products to ensure human health and food safety.
- Open Access
Research Progress on the Application of Upconversion Nanoparticles in Heavy Metal Detection in Foodstuff
Heavy metal contamination in foodstuff poses a serious threat to food safety and human health; therefore, the development of toxic heavy metal detection methods is crucial. However, lots of these methods, based on traditional nanomaterials, have unavoidable limitations, such as high instrument cost, complicated operation procedures, or a long analysis time, which restrict their wide application in heavy metal detection. This review aims to conduct a systematic overview of major analytical methods using novel upconversion nanoparticles (UCNPs) for assessing heavy metal ions in complex food matrices in the context of food safety and show their potential application prospects when combined with big data and artificial intelligence. Due to their unique optical properties, good bio-compatibility, and tunable interfacial chemistry, UCNPs have shown significant detection advantages in the field of food heavy metal analysis. The review summarizes the progress of the application of UCNPs in heavy metal detection in food. Despite the development of new technologies such as artificial intelligence, and the continuous optimization and improvement of its own design, the wide application of UCNPs in food safety detection still has great potential for further development.
Open AccessResearch Progress on the Application of Upconversion Nanoparticles in Heavy Metal Detection in Foodstuff
Heavy metal contamination in foodstuff poses a serious threat to food safety and human health; therefore, the development of toxic heavy metal detection methods is crucial. However, lots of these methods, based on traditional nanomaterials, have unavoidable limitations, such as high instrument cost, complicated operation procedures, or a long analysis time, which restrict their wide application in heavy metal detection. This review aims to conduct a systematic overview of major analytical methods using novel upconversion nanoparticles (UCNPs) for assessing heavy metal ions in complex food matrices in the context of food safety and show their potential application prospects when combined with big data and artificial intelligence. Due to their unique optical properties, good bio-compatibility, and tunable interfacial chemistry, UCNPs have shown significant detection advantages in the field of food heavy metal analysis. The review summarizes the progress of the application of UCNPs in heavy metal detection in food. Despite the development of new technologies such as artificial intelligence, and the continuous optimization and improvement of its own design, the wide application of UCNPs in food safety detection still has great potential for further development.