Assem Zhumagaliyeva
Research Subjects
Assem Zhumagaliyeva has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Almagul R. Kerimkulova
Satbayev University
4 shared publications - Leticia Fernandez Velasco
Department of Chemistry, Royal Military Academy, Avenue de la Renaissance 30, 1000 Brussels, Belgium
4 shared publications - Aitugan Sabitov
Department of Analytical, Colloid Chemistry and Technology of Rare Elements, Al-Farabi Kazakh National University, Al-Farabi Ave., 71, Almaty 050040, Kazakhstan
3 shared publications - Meiram Atamanov
Institute of Combustion Problems, 172 Bogenbay Batyr Str., Almaty 050012, Kazakhstan;Faculty of Natural Sciences, Kazakh National Women’s Teacher Training University, Gogol Str., 114, k. 1, Almaty 050000, Kazakhstan, Kazakhstan
3 shared publications - Ospan Doszhanov
Department of Automation and Robotics, Almaty Technological University, Tole bi Str. 100, Almaty 050012, Kazakhstan
3 shared publications - Yersultan Yermoldanov
Nanobiotechnology Laboratory, Combustion Problems Institute, Bogenbay Batyr Str., 172, Almaty 050012, Kazakhstan
3 shared publications
Latest Publications
- Open Access
Advances in Biochar-Based Adsorbents and Performance Assessment for the Removal of Gaseous Pollutants
This review critically examines physical and chemical strategies used to enhance the adsorption of CO2, volatile organic compounds (VOCs), SO2 and H2S by biochar-based sorbents. The literature indicates that adsorption performance is governed by the combined effects of feedstock properties, thermochemical conversion conditions, pore structure, surface area and surface chemistry. Physical activation, particularly with steam or CO2, primarily promotes pore development and increases accessible surface area, whereas chemical treatments with KOH, H3PO4, H2SO4, amine-based compounds, and biopolymers can additionally modify surface functionality and gas–surface interactions. Across the reviewed studies, KOH activation and nitrogen functionalization are frequently associated with enhanced CO2 uptake, while acidic surface modification can improve interactions with selected polar VOCs. For sulfur-containing gases, pore development together with appropriate surface functional groups can facilitate both physical adsorption and surface reactions. Rather than identifying a universally optimal modification route, the available evidence shows that sorbent design should be tailored to the physicochemical properties of the target gas. The review also examines biomass residues as precursors and key technical factors affecting the scalability of biochar-based gas purification systems. Overall, the literature highlights biochar’s potential for gas adsorption and the need for evaluation of modification strategies and validation under realistic conditions.
Open AccessAdvances in Biochar-Based Adsorbents and Performance Assessment for the Removal of Gaseous Pollutants
This review critically examines physical and chemical strategies used to enhance the adsorption of CO2, volatile organic compounds (VOCs), SO2 and H2S by biochar-based sorbents. The literature indicates that adsorption performance is governed by the combined effects of feedstock properties, thermochemical conversion conditions, pore structure, surface area and surface chemistry. Physical activation, particularly with steam or CO2, primarily promotes pore development and increases accessible surface area, whereas chemical treatments with KOH, H3PO4, H2SO4, amine-based compounds, and biopolymers can additionally modify surface functionality and gas–surface interactions. Across the reviewed studies, KOH activation and nitrogen functionalization are frequently associated with enhanced CO2 uptake, while acidic surface modification can improve interactions with selected polar VOCs. For sulfur-containing gases, pore development together with appropriate surface functional groups can facilitate both physical adsorption and surface reactions. Rather than identifying a universally optimal modification route, the available evidence shows that sorbent design should be tailored to the physicochemical properties of the target gas. The review also examines biomass residues as precursors and key technical factors affecting the scalability of biochar-based gas purification systems. Overall, the literature highlights biochar’s potential for gas adsorption and the need for evaluation of modification strategies and validation under realistic conditions.
- Open Access
- 7 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6812
Use of Urea-Modified Activated Carbon Sorbents Derived from Plant Residues for Gas Sorption
The growing demand for efficient and sustainable materials for air purification has stimulated interest in activated carbons derived from renewable biomass resources. In this study, activated carbons were prepared from Rice Husk, Wheat Straw, Sawdust, and Walnut shells and systematically investigated as sorbents for toxic gases and volatile organic compounds. The materials were characterized using nitrogen and water vapor sorption isotherms, scanning electron microscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, energy-dispersive X-ray and XPS analysis to evaluate their textural properties, morphology, thermal stability, and surface chemistry. The results showed that the precursor type strongly influences the pore structure and functional group composition of the activated carbons. Wheat straw and Rice Husk-derived activated carbons exhibited the highest total pore volume and a well-developed porous structure, together with a high content of oxygen- and silicon-containing elements. Gas breakthrough experiments with different probes showed that Wheat Straw-derived activated carbon excels in non-polar VOC—cyclohexane removal due to its highly microporous structure. In contrast, Rice Husk-derived activated carbon displays strong affinity toward inorganic gases such as NH3 and, after urea modification, achieves enhanced performance for SO2. These results underscore the versatility and practical applicability of carbon materials obtained from plant residues.
- 7 July 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6812
Open AccessUse of Urea-Modified Activated Carbon Sorbents Derived from Plant Residues for Gas Sorption
The growing demand for efficient and sustainable materials for air purification has stimulated interest in activated carbons derived from renewable biomass resources. In this study, activated carbons were prepared from Rice Husk, Wheat Straw, Sawdust, and Walnut shells and systematically investigated as sorbents for toxic gases and volatile organic compounds. The materials were characterized using nitrogen and water vapor sorption isotherms, scanning electron microscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, energy-dispersive X-ray and XPS analysis to evaluate their textural properties, morphology, thermal stability, and surface chemistry. The results showed that the precursor type strongly influences the pore structure and functional group composition of the activated carbons. Wheat straw and Rice Husk-derived activated carbons exhibited the highest total pore volume and a well-developed porous structure, together with a high content of oxygen- and silicon-containing elements. Gas breakthrough experiments with different probes showed that Wheat Straw-derived activated carbon excels in non-polar VOC—cyclohexane removal due to its highly microporous structure. In contrast, Rice Husk-derived activated carbon displays strong affinity toward inorganic gases such as NH3 and, after urea modification, achieves enhanced performance for SO2. These results underscore the versatility and practical applicability of carbon materials obtained from plant residues.
- Open Access
- 25 May 2026
- Published by MDPI AG in Preprints.org
Use of Urea-Modified Activated Carbon Sorbents Derived from Plant Residues for Gas Sorption
The growing demand for efficient and sustainable materials for air purification has stimulated interest in activated carbons derived from renewable biomass resources. In this study, activated carbons were prepared from rice husk, wheat straw, sawdust, and walnut shells and systematically investigated as sorbents for toxic gases and volatile organic compounds. The materials were characterized using nitrogen and water vapour sorption isotherms, scanning electron microscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, and energy-dispersive X-ray analysis to evaluate their textural properties, morphology, thermal stability, and surface chemistry. The results showed that the precursor type strongly influences the pore structure and functional group composition of the activated carbons. Wheat straw and Rice husk–derived activated carbons exhibited the highest total pore volume and a well-developed porous structure, together with a high content of oxygen- and silicon-containing elements. Gas breakthrough experiments with different probes showed that wheat straw–derived activated carbon excels in VOC removal due to its highly microporous structure. In contrast, rice husk–derived activated carbon displays strong affinity toward inorganic gases such as NH₃ and, after urea modification, achieves enhanced performance for SO₂. These results underscore the versatility and practical applicability of carbon materials obtained from plant residues.
- 25 May 2026
- Published by MDPI AG in Preprints.org
Open AccessUse of Urea-Modified Activated Carbon Sorbents Derived from Plant Residues for Gas Sorption
The growing demand for efficient and sustainable materials for air purification has stimulated interest in activated carbons derived from renewable biomass resources. In this study, activated carbons were prepared from rice husk, wheat straw, sawdust, and walnut shells and systematically investigated as sorbents for toxic gases and volatile organic compounds. The materials were characterized using nitrogen and water vapour sorption isotherms, scanning electron microscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, and energy-dispersive X-ray analysis to evaluate their textural properties, morphology, thermal stability, and surface chemistry. The results showed that the precursor type strongly influences the pore structure and functional group composition of the activated carbons. Wheat straw and Rice husk–derived activated carbons exhibited the highest total pore volume and a well-developed porous structure, together with a high content of oxygen- and silicon-containing elements. Gas breakthrough experiments with different probes showed that wheat straw–derived activated carbon excels in VOC removal due to its highly microporous structure. In contrast, rice husk–derived activated carbon displays strong affinity toward inorganic gases such as NH₃ and, after urea modification, achieves enhanced performance for SO₂. These results underscore the versatility and practical applicability of carbon materials obtained from plant residues.
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1)
A Review on Additive Manufacturing of Ti‐Containing High‐Entropy Alloys: Processing, Microstructure, and Mechanical Behavior
High‐entropy alloys (HEAs) have emerged as a promising class of materials due to their unique chemical compositions and exceptional mechanical properties. Among them, Ti‐containing HEAs have gained significant attention for their applications in aerospace, biomedical, and high‐temperature environments, owing to their lightweight nature, superior strength, and excellent biocompatibility. The advent of additive manufacturing (AM) has further expanded the potential of these alloys by enabling precise microstructural control, enhanced mechanical performance, and cost‐effective production. This review provides a comprehensive analysis of the recent advancements in the development of Ti‐containing HEAs using various AM techniques, including powder bed fusion (PBF) and direct energy deposition (DED). The study examines critical aspects, including alloy classification, feedstock preparation, and AM processing methods, microstructural evolution, and resultant mechanical properties. By integrating a data‐driven approach using Scopus records, this review systematically analyzes and compares mechanical properties across studies and explores the relationships among feedstock preparation, AM processing, and material performance. The insights presented in this work aim to guide future research directions, refine alloy design, and optimize AM processes to enhance the industrial applicability of Ti‐containing HEAs.
- 1 January 2026
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2026 (1)
Open AccessA Review on Additive Manufacturing of Ti‐Containing High‐Entropy Alloys: Processing, Microstructure, and Mechanical Behavior
High‐entropy alloys (HEAs) have emerged as a promising class of materials due to their unique chemical compositions and exceptional mechanical properties. Among them, Ti‐containing HEAs have gained significant attention for their applications in aerospace, biomedical, and high‐temperature environments, owing to their lightweight nature, superior strength, and excellent biocompatibility. The advent of additive manufacturing (AM) has further expanded the potential of these alloys by enabling precise microstructural control, enhanced mechanical performance, and cost‐effective production. This review provides a comprehensive analysis of the recent advancements in the development of Ti‐containing HEAs using various AM techniques, including powder bed fusion (PBF) and direct energy deposition (DED). The study examines critical aspects, including alloy classification, feedstock preparation, and AM processing methods, microstructural evolution, and resultant mechanical properties. By integrating a data‐driven approach using Scopus records, this review systematically analyzes and compares mechanical properties across studies and explores the relationships among feedstock preparation, AM processing, and material performance. The insights presented in this work aim to guide future research directions, refine alloy design, and optimize AM processes to enhance the industrial applicability of Ti‐containing HEAs.
- Open Access
- 8 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 10977
Zeolites and Activated Carbons in Hydroponics: A Systematic Review of Mechanisms, Performance Metrics, Techno-Economic Analysis and Life-Cycle Assessment
The sustainable operation of hydroponic systems depends on maintaining the chemical stability of circulating nutrient solutions and preventing the accumulation of toxic compounds. The accumulation of phytotoxic ammonium, heavy metals, and organic metabolites in recirculating nutrient solutions remains one of the key challenges limiting the efficiency, sustainability, and scalability of hydroponic cultivation. This review provides a comprehensive comparative analysis of zeolites, activated carbons (ACs), and their functionalized and composite forms as key sorbents for nutrient management, contaminant removal, and environmental safety in hydroponic cultivation. Natural zeolites, with their well-defined crystalline structure and high ion-exchange selectivity toward ammonium and heavy metal cations, enable effective NH4+/K+ balance regulation and phytotoxicity mitigation. ACs, characterized by high specific surface area and tunable surface chemistry, complement zeolites by offering extensive adsorption capacity for organic compounds, root exudates, and pesticide residues, thereby extending the operational lifespan of nutrient solutions and improving overall system performance. Further advancements include the integration of zeolites and ACs with two-dimensional (graphene, g-C3N4) and three-dimensional (MOF, COF) frameworks, yielding multifunctional materials that combine adsorption, ion exchange, photocatalysis, and nutrient regulation. Transition-metal modification, particularly with Fe, Mn, Cu, Ni, and Co, introduces redox-active centers that enhance sorption, catalysis, and phosphate stabilization. The comparative synthesis reveals that the combined application of zeolite- and carbon-based composites offers a synergistic strategy for developing adaptive and low-waste hydroponic systems. From a techno-economic and environmental standpoint, the judicious application of these materials paves the way for more resilient, efficient, and circular hydroponic systems, reducing fertilizer and water consumption, lowering contaminant discharge, and enhancing food security. This systematic review was conducted according to the PRISMA 2020 guidelines. Relevant studies were identified through Scopus, Web of Science, and Google Scholar databases using specific inclusion and exclusion criteria.
- 8 December 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (24) , 10977
Open AccessZeolites and Activated Carbons in Hydroponics: A Systematic Review of Mechanisms, Performance Metrics, Techno-Economic Analysis and Life-Cycle Assessment
The sustainable operation of hydroponic systems depends on maintaining the chemical stability of circulating nutrient solutions and preventing the accumulation of toxic compounds. The accumulation of phytotoxic ammonium, heavy metals, and organic metabolites in recirculating nutrient solutions remains one of the key challenges limiting the efficiency, sustainability, and scalability of hydroponic cultivation. This review provides a comprehensive comparative analysis of zeolites, activated carbons (ACs), and their functionalized and composite forms as key sorbents for nutrient management, contaminant removal, and environmental safety in hydroponic cultivation. Natural zeolites, with their well-defined crystalline structure and high ion-exchange selectivity toward ammonium and heavy metal cations, enable effective NH4+/K+ balance regulation and phytotoxicity mitigation. ACs, characterized by high specific surface area and tunable surface chemistry, complement zeolites by offering extensive adsorption capacity for organic compounds, root exudates, and pesticide residues, thereby extending the operational lifespan of nutrient solutions and improving overall system performance. Further advancements include the integration of zeolites and ACs with two-dimensional (graphene, g-C3N4) and three-dimensional (MOF, COF) frameworks, yielding multifunctional materials that combine adsorption, ion exchange, photocatalysis, and nutrient regulation. Transition-metal modification, particularly with Fe, Mn, Cu, Ni, and Co, introduces redox-active centers that enhance sorption, catalysis, and phosphate stabilization. The comparative synthesis reveals that the combined application of zeolite- and carbon-based composites offers a synergistic strategy for developing adaptive and low-waste hydroponic systems. From a techno-economic and environmental standpoint, the judicious application of these materials paves the way for more resilient, efficient, and circular hydroponic systems, reducing fertilizer and water consumption, lowering contaminant discharge, and enhancing food security. This systematic review was conducted according to the PRISMA 2020 guidelines. Relevant studies were identified through Scopus, Web of Science, and Google Scholar databases using specific inclusion and exclusion criteria.