Edgar Martínez-Guerra
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Edgar Martínez-Guerra has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Martínez-Guerra
CIMAV-Subsede Monterrey, Centro de Investigación en Materiales Avanzados, Av. Alianza Norte 202 Parque de Investigación e Innovación Tecnológica, Apodaca 66628, Mexico
3 shared publications - María Teresa Romero de la Cruz
Universidad Autónoma de Coahuila
3 shared publications - Carlos Alberto Fuentes-Hernández
ITS Sur de Guanajuato, Tecnológico Nacional de México, Av. Educación Superior 2000, Uriangato 38982, Mexico
2 shared publications - Guillermo Ezequiel Sánchez-Guerrero
Facultad de Ciencias Físico-Matemáticas, Universidad Autónoma de Nuevo León, Pedro de Alba S/N, San Nicolás de los Garza 66451, Mexico
2 shared publications - Karan Kishor Singh
Facultad de Ciencias Físico-Matemáticas, Universidad Autónoma de Nuevo León, Pedro de Alba S/N, San Nicolás de los Garza 66451, Mexico
2 shared publications - Perla Marlene Viera-González
Facultad de Ciencias Físico-Matemáticas, Universidad Autónoma de Nuevo León, Pedro de Alba S/N, San Nicolás de los Garza 66451, Mexico
2 shared publications
Latest Publications
- 12 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (42) , 19958-19971
DFT-Guided Molten Salt Synthesis of Cl-Terminated Nb4C3 MXene Nanomaterial via CuCl Lewis Acid Etching for Electrochemical Applications
Conventional etching routes for Al-containing MAX phases rely primarily on fluoride-based chemistries, which provide limited control over surface terminations and motivate the development of alternative etching strategies. To address this, CuCl is evaluated as a Lewis acid molten salt etchant for Al removal from Nb4AlC3, and DFT reaction-energy calculations are used as a pre-experimental screening tool to evaluate the energetic plausibility of the proposed reaction pathway. Reaction-energy (ΔErxn) values for the selected stoichiometric steps indicate that the corresponding product configurations are lower in electronic energy than the reactant configurations within the adopted DFT model. Projected density of states (PDOS) calculations were also performed to track how the electronic structure evolves across the reaction, indicating retention of the metallic Nb−C electronic framework following Cl termination. Guided by these computational findings, Nb4C3Tx is synthesized by reacting Nb4AlC3 with CuCl at 700 °C for 8 h. X-ray diffraction (XRD) showed a shift of the (002) reflection from 7.55° to 6.55° (2θ), indicating interlayer expansion associated with Al removal and Nb4C3Tx formation. Field emission-scanning electron microscopy (SEM) imaging shows the layered nanoscale morphology characteristic of etched Nb4C3Tx, and High-resolution transmission electron microscopy (HRTEM) confirms that hexagonal structural ordering was retained, with resolved lattice fringes of 0.26 nm. The X-ray photoelectron spectroscopy (XPS) confirms the presence of Nb−C bonding environments together with Cl surface terminations consistent with the Cl-containing surface chemistry considered in the DFT model. The calculated reaction energies represent static electronic energies at approximately 0 K and do not include finite-temperature Gibbs free energies, activation barriers, or reaction kinetics at 700 °C; therefore, they provide a comparative screening criterion rather than independent proof of reaction spontaneity or the experimental mechanism. Altogether, these results demonstrate the potential of DFT-assisted energetic screening for selecting molten-salt etchants and controlling MXene surface chemistry, with relevance to electrochemical applications such as energy storage and sensing applications.
- 12 October 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 9 (42) , 19958-19971
DFT-Guided Molten Salt Synthesis of Cl-Terminated Nb4C3 MXene Nanomaterial via CuCl Lewis Acid Etching for Electrochemical Applications
Conventional etching routes for Al-containing MAX phases rely primarily on fluoride-based chemistries, which provide limited control over surface terminations and motivate the development of alternative etching strategies. To address this, CuCl is evaluated as a Lewis acid molten salt etchant for Al removal from Nb4AlC3, and DFT reaction-energy calculations are used as a pre-experimental screening tool to evaluate the energetic plausibility of the proposed reaction pathway. Reaction-energy (ΔErxn) values for the selected stoichiometric steps indicate that the corresponding product configurations are lower in electronic energy than the reactant configurations within the adopted DFT model. Projected density of states (PDOS) calculations were also performed to track how the electronic structure evolves across the reaction, indicating retention of the metallic Nb−C electronic framework following Cl termination. Guided by these computational findings, Nb4C3Tx is synthesized by reacting Nb4AlC3 with CuCl at 700 °C for 8 h. X-ray diffraction (XRD) showed a shift of the (002) reflection from 7.55° to 6.55° (2θ), indicating interlayer expansion associated with Al removal and Nb4C3Tx formation. Field emission-scanning electron microscopy (SEM) imaging shows the layered nanoscale morphology characteristic of etched Nb4C3Tx, and High-resolution transmission electron microscopy (HRTEM) confirms that hexagonal structural ordering was retained, with resolved lattice fringes of 0.26 nm. The X-ray photoelectron spectroscopy (XPS) confirms the presence of Nb−C bonding environments together with Cl surface terminations consistent with the Cl-containing surface chemistry considered in the DFT model. The calculated reaction energies represent static electronic energies at approximately 0 K and do not include finite-temperature Gibbs free energies, activation barriers, or reaction kinetics at 700 °C; therefore, they provide a comparative screening criterion rather than independent proof of reaction spontaneity or the experimental mechanism. Altogether, these results demonstrate the potential of DFT-assisted energetic screening for selecting molten-salt etchants and controlling MXene surface chemistry, with relevance to electrochemical applications such as energy storage and sensing applications.
- Open Access
- 10 October 2026
- Published by Elsevier in SSRN Electronic Journal
Transmetalation-Driven Nickel Doping of ZnO Thin Films by Atomic Partial Layer Deposition
We report on precise control of nickel incorporation into zinc oxide (ZnO) thin films using atomic partial layer deposition (APLD), based on a supercycle design alternating Zn and Ni precursors with short, non-saturating diethylzinc (DEZ) exposures. The use of DEZ and nickel acetylacetonate Ni(acac)₂ with oxygen exposure ensures partial surface reactions and transmetalation, enabling sub-monolayer control and fine-tuning of dopant concentration. By modulating the supercycle ratio, we achieved substitutional Ni doping at 1, 3, 4, and 5%, enhancing physicochemical properties. The growth per cycle increased from 0.17 nm/cycle for pure ZnO to 0.27 nm/cycle for NZO with 5% Ni. Morphological and structural analyses (SEM, GI-XRD) confirm that doping with Ni above 3% induces its uniform surface distribution and a pronounced crystallographic reorientation towards the (103) plane. Furthermore, the crystallite size increased from 10.6 nm (pure ZnO) to 19.9 nm (5% Ni-doped ZnO). The most notable improvements were obtained for optoelectronic properties of the films. The 5% Ni-doped film exhibited the best performance, characterized by near-ideal stoichiometry (O/M ratio 0.90) and a significant increase in electrical resistivity from 11.11 Ω·cm (ZnO) to 719.10 Ω·cm, while maintaining a stable absorption edge and a band gap of ~3.27 eV. Photoluminescence spectra showed a significant blue-shift of the defect emission from 628 nm to 403 nm with Ni incorporation. Thus, the most advanced 5% Ni-doped ZnO film is a promising candidate for dielectric channels in thin-film transistors, achieving a notable balance of high electrical resistivity and good optoelectronic performance.
- 10 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessTransmetalation-Driven Nickel Doping of ZnO Thin Films by Atomic Partial Layer Deposition
We report on precise control of nickel incorporation into zinc oxide (ZnO) thin films using atomic partial layer deposition (APLD), based on a supercycle design alternating Zn and Ni precursors with short, non-saturating diethylzinc (DEZ) exposures. The use of DEZ and nickel acetylacetonate Ni(acac)₂ with oxygen exposure ensures partial surface reactions and transmetalation, enabling sub-monolayer control and fine-tuning of dopant concentration. By modulating the supercycle ratio, we achieved substitutional Ni doping at 1, 3, 4, and 5%, enhancing physicochemical properties. The growth per cycle increased from 0.17 nm/cycle for pure ZnO to 0.27 nm/cycle for NZO with 5% Ni. Morphological and structural analyses (SEM, GI-XRD) confirm that doping with Ni above 3% induces its uniform surface distribution and a pronounced crystallographic reorientation towards the (103) plane. Furthermore, the crystallite size increased from 10.6 nm (pure ZnO) to 19.9 nm (5% Ni-doped ZnO). The most notable improvements were obtained for optoelectronic properties of the films. The 5% Ni-doped film exhibited the best performance, characterized by near-ideal stoichiometry (O/M ratio 0.90) and a significant increase in electrical resistivity from 11.11 Ω·cm (ZnO) to 719.10 Ω·cm, while maintaining a stable absorption edge and a band gap of ~3.27 eV. Photoluminescence spectra showed a significant blue-shift of the defect emission from 628 nm to 403 nm with Ni incorporation. Thus, the most advanced 5% Ni-doped ZnO film is a promising candidate for dielectric channels in thin-film transistors, achieving a notable balance of high electrical resistivity and good optoelectronic performance.
- Open Access
Analytical-Numerical Modeling of Filling-Fraction-Dependent Plasmonic Coupling in Nanostructured Metasurfaces Under Kretschmann Configuration
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical and numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). The study combines Effective Medium Theory (EMT) and the Transfer Matrix Method (TMM) to describe the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, primarily driven by the filling fraction. The analysis reveals that polarization-dependent behavior arises from boundary-condition-mediated coupling mechanisms governing surface plasmon excitation, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of the EMT–TMM framework. These results provide a systematic description of how polarization and filling fraction jointly modulate SPR coupling. The results offer a foundation for the rational design of plasmonic coatings and SPR-supporting metasurfaces by elucidating macroscopic coupling trends; however, no quantitative sensor performance metrics, such as refractive index sensitivity or figure of merit, are evaluated in this work.
Open AccessAnalytical-Numerical Modeling of Filling-Fraction-Dependent Plasmonic Coupling in Nanostructured Metasurfaces Under Kretschmann Configuration
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical and numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). The study combines Effective Medium Theory (EMT) and the Transfer Matrix Method (TMM) to describe the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, primarily driven by the filling fraction. The analysis reveals that polarization-dependent behavior arises from boundary-condition-mediated coupling mechanisms governing surface plasmon excitation, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of the EMT–TMM framework. These results provide a systematic description of how polarization and filling fraction jointly modulate SPR coupling. The results offer a foundation for the rational design of plasmonic coatings and SPR-supporting metasurfaces by elucidating macroscopic coupling trends; however, no quantitative sensor performance metrics, such as refractive index sensitivity or figure of merit, are evaluated in this work.
- Open Access
- 19 December 2025
- Published by MDPI AG in Preprints.org
Analytical—Numerical Modeling of Filling Fraction Dependent Plasmonic Coupling in Nanostructured Metasurfaces under Kretschmann Configuration
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical–numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). This framework provides a consistent and computationally efficient description of the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, driven mainly by filling fraction. The analysis reveals that polarization-dependent effects arise from variations in boundary-condition coupling rather than distinct localized resonances, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of EMT–TMM predictions. No full-wave simulations or experiments are presented; all results derive from analytical-numerical modeling. Rather than proposing new excitation mechanisms, this study provides a validated theoretical framework for understanding how polarization and nanostructural filling fraction jointly modulate SPR coupling in thin-film metasurfaces. The results offer a foundation for rational design and optimization of plasmonic coatings and SPR sensors with tunable surface sensitivity.
- 19 December 2025
- Published by MDPI AG in Preprints.org
Open AccessAnalytical—Numerical Modeling of Filling Fraction Dependent Plasmonic Coupling in Nanostructured Metasurfaces under Kretschmann Configuration
Surface plasmon resonance (SPR) sensors based on nanostructured metasurfaces offer enhanced sensitivity through engineered electromagnetic responses. In this study, we present an analytical–numerical investigation of the plasmonic behavior of gold nanopillar (Au-NP) and nanohole (Au-NH) arrays under both p- and s-polarized illumination, employing the Effective Medium Theory (EMT) in combination with the Transfer Matrix Method (TMM). This framework provides a consistent and computationally efficient description of the macroscopic optical response of multilayer plasmonic systems. For p-polarization, the nanostructure geometry strongly modulates the real and imaginary parts of the effective permittivity, with nanoholes supporting stronger SPR coupling and reduced optical losses compared to nanopillars. Under s-polarization, the effective permittivity remains largely invariant, driven mainly by filling fraction. The analysis reveals that polarization-dependent effects arise from variations in boundary-condition coupling rather than distinct localized resonances, aligning with classical plasmonic theory. Benchmarking against analytical dispersion relations and published experimental data for Au/BK7 systems shows close agreement within ±2°, confirming the physical consistency of EMT–TMM predictions. No full-wave simulations or experiments are presented; all results derive from analytical-numerical modeling. Rather than proposing new excitation mechanisms, this study provides a validated theoretical framework for understanding how polarization and nanostructural filling fraction jointly modulate SPR coupling in thin-film metasurfaces. The results offer a foundation for rational design and optimization of plasmonic coatings and SPR sensors with tunable surface sensitivity.
- Open Access
- 3 December 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (49) , 60125-60141
First-Principles Studies on Sc 2 RuZ (Z = Si, Ge, Sn) Inverse Heusler Alloys: Structural, Electronic, and Transport Properties
The continuous demand for efficient, nontoxic, and thermally stable materials for room-temperature energy conversion motivates the exploration of novel thermoelectric systems beyond the traditional magnetic Heusler alloys. While full and half-Heusler compounds, especially Co-, Ni-, and Mn-based systems, have demonstrated promising thermoelectric properties, their typically high operating temperatures and magnetic complexities limit their applicability in ambient thermal management. In this context, we investigate whether Sc-based inverse Heusler alloys can offer a viable nonmagnetic alternative with competitive thermoelectric performance. In this work, we perform a systematic first-principles study of the inverse Heusler compounds Sc2RuZ (Z = Si, Ge, Sn), focusing on their structural, electronic, mechanical, and thermodynamic-thermoelectric properties. Density Functional Theory (DFT) was employed to compute optimized lattice structures and band dispersion, while dynamical stability was assessed via phonon calculations. Thermoelectric transport coefficients, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were estimated using the semiclassical Boltzmann transport theory within the constant relaxation time approximation. Our results show that all Sc2RuZ compounds are thermodynamically stable semiconductors with indirect band gaps of 0.12–0.16 eV and exhibit high elastic moduli, especially Sc2RuSn, which demonstrates superior stiffness and incompressibility. Importantly, all compounds display promising room-temperature thermoelectric characteristics, including high Seebeck coefficients and power factors. These findings reveal that Sc2RuZ alloys represent a rare class of stable, nonmagnetic inverse Heusler semiconductors with intrinsic thermoelectric potential at room temperature, unlike many existing Heusler systems optimized for spintronics or high-temperature operation. This work expands the known design space for Heusler-based thermoelectrics and offers a theoretical basis for experimental realization of efficient, low-temperature, nonmagnetic thermoelectric materials.
- 3 December 2025
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 10 (49) , 60125-60141
Open AccessFirst-Principles Studies on Sc 2 RuZ (Z = Si, Ge, Sn) Inverse Heusler Alloys: Structural, Electronic, and Transport Properties
The continuous demand for efficient, nontoxic, and thermally stable materials for room-temperature energy conversion motivates the exploration of novel thermoelectric systems beyond the traditional magnetic Heusler alloys. While full and half-Heusler compounds, especially Co-, Ni-, and Mn-based systems, have demonstrated promising thermoelectric properties, their typically high operating temperatures and magnetic complexities limit their applicability in ambient thermal management. In this context, we investigate whether Sc-based inverse Heusler alloys can offer a viable nonmagnetic alternative with competitive thermoelectric performance. In this work, we perform a systematic first-principles study of the inverse Heusler compounds Sc2RuZ (Z = Si, Ge, Sn), focusing on their structural, electronic, mechanical, and thermodynamic-thermoelectric properties. Density Functional Theory (DFT) was employed to compute optimized lattice structures and band dispersion, while dynamical stability was assessed via phonon calculations. Thermoelectric transport coefficients, including Seebeck coefficient, electrical conductivity, and thermal conductivity, were estimated using the semiclassical Boltzmann transport theory within the constant relaxation time approximation. Our results show that all Sc2RuZ compounds are thermodynamically stable semiconductors with indirect band gaps of 0.12–0.16 eV and exhibit high elastic moduli, especially Sc2RuSn, which demonstrates superior stiffness and incompressibility. Importantly, all compounds display promising room-temperature thermoelectric characteristics, including high Seebeck coefficients and power factors. These findings reveal that Sc2RuZ alloys represent a rare class of stable, nonmagnetic inverse Heusler semiconductors with intrinsic thermoelectric potential at room temperature, unlike many existing Heusler systems optimized for spintronics or high-temperature operation. This work expands the known design space for Heusler-based thermoelectrics and offers a theoretical basis for experimental realization of efficient, low-temperature, nonmagnetic thermoelectric materials.
- Open Access
Pressure effects on the superconducting critical temperature of Li2B2
We present the structural, electronic and superconducting properties of Li2B2 under pressure within the framework of the density functional theory. The structural parameters, electronic band structure, phonon frequency of the E2g phonon mode and superconducting critical temperature Tc were calculated for pressures up to 20 GPa. We predicted that the superconducting critical temperature of Li2B2 is about 11 K and this decreases as pressure increases. We found that even though the lattice dynamics of the E2g phonon mode is similar to MgB2, the reduction of the {\sigma}-band density of states at Fermi level and the raising of the E2g phonon frequency with pressure were determinant to decrease {\lambda} and consequently Tc.
Open AccessPressure effects on the superconducting critical temperature of Li2B2
We present the structural, electronic and superconducting properties of Li2B2 under pressure within the framework of the density functional theory. The structural parameters, electronic band structure, phonon frequency of the E2g phonon mode and superconducting critical temperature Tc were calculated for pressures up to 20 GPa. We predicted that the superconducting critical temperature of Li2B2 is about 11 K and this decreases as pressure increases. We found that even though the lattice dynamics of the E2g phonon mode is similar to MgB2, the reduction of the {\sigma}-band density of states at Fermi level and the raising of the E2g phonon frequency with pressure were determinant to decrease {\lambda} and consequently Tc.