Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Qianbing Xu has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ML-Assisted Prediction of In-Cylinder Pressures of Spark-Ignition Engines

    by Yu Zhang, Qianbing Xu, Xinfeng Zhang

    In-cylinder pressure is a key parameter for evaluating combustion processes and engine performance in spark-ignition engines. However, acquiring high-resolution pressure data over a wide range of operating conditions, particularly under varying spark advance (SA), is costly and technically challenging, which limits its practical application. To address this issue, this study proposes two artificial neural network (ANN)-based methods for in-cylinder pressure reconstruction using data from a three-cylinder gasoline engine under different spark advance conditions. Both methods employ crank angle and spark advance as input features. The first method (ANN-P) directly predicts the in-cylinder pressure profile, achieving a coefficient of determination (R2) exceeding 0.99 on both training and validation datasets, with a root mean square error (RMSE) below 0.13 bar. The model accurately reproduces the pressure evolution throughout the compression, combustion, and expansion processes and enables reliable estimation of indicated mean effective pressure (IMEP). The second method (ANN-HRR) adopts an indirect strategy by first predicting the heat release rate (HRR) and subsequently reconstructing the pressure trace through thermodynamic integration based on a single-zone model. This approach avoids error amplification associated with numerical differentiation and demonstrates improved accuracy in predicting combustion phasing metrics, such as CA10 and CA50. The results indicate that both methods effectively capture the influence of spark timing on combustion characteristics and peak pressure. While ANN-P provides higher accuracy in pressure reconstruction, ANN-HRR offers superior performance in characterizing combustion features. Overall, this study presents a cost-effective and accurate framework for combustion diagnostics, performance calibration, and control optimization of gasoline engines.


  • Open Access

    ML-Assisted Prediction of In-Cylinder Pressures of Spark Ignition Engines

    by Yu Zhang, Qianbing Xu, Xinfeng Zhang

    In-cylinder pressure is a critical parameter for assessing the combustion process and per-formance of spark ignition internal combustion engines. However, obtaining measured in-cylinder pressure data across the full operating range, particularly at various spark advance angles (SA), is costly and technically demanding, limiting its widespread application in engineering practice. This study proposes two artificial neural network (ANN) based in-cylinder pressure reconstruction methods utilizing in-cylinder pressure and heat release rate data from a three-cylinder motorcycle gasoline engine under varying spark advance angle conditions, aiming to achieve cost-effective, high-precision pressure prediction through machine learning technology. Both pressure reconstruction methods employ crank angle and spark advance angle as input features. Method 1 (ANN-P) directly predicts the in-cylinder pressure curve, achieving a coefficient of determination R² exceeding 0.99 on both training and validation sets with a root mean square error (RMSE) below 0.13 bar, accurately reproducing the pressure evolution throughout the compression, combustion, and expansion processes while achieving high-precision prediction of indicated mean effective pressure (IMEP). Method 2 (ANN-HRR) adopts an indirect strategy of "predicting heat release rate followed by integration to reconstruct pressure." This method first derives the apparent heat release rate (HRR) from measured in-cylinder pressure data, trains a machine learning algorithm with HRR data to predict the target operating condition's HRR curve, then reconstructs in-cylinder pressure through integral inversion based on a single-zone thermodynamic model, thereby avoiding error amplification caused by differential operations. This approach demonstrates superior performance in predicting combustion characteristic points (CA10, CA50). The results demonstrate that both methods accurately capture the influence of spark timing on combustion phasing and peak pressure. Method 1 achieves high accuracy in predicted pressure curves but exhibits lower accuracy in capturing combustion characteristics; Method 2 effectively compensates for the limitations of Method 1 in characterizing combustion features through heat release rate curve prediction. This study provides an economical and efficient technical approach for gasoline engine combustion diagnosis, performance calibration, and control optimization.

  • Open Access

    A Novel Multi-Needle-to-Cylinder Dielectric Barrier Discharge Reactor with Deflector Rings for Energy-Efficient Removal of Sulfides and Ammonia from Odor Gases

    by Qi Qiu, Zhuojun Zhang, Qianbing Xu, Yu Zhang, Wuhua Li, Xiangning He

    Non-thermal plasma is a promising technology for odor abatement from agricultural and domestic waste. However, its widespread application is often limited by the inherent trade-off between energy efficiency and processing capacity in conventional reactors. To address this challenge, we propose a novel multi-needle-to-cylinder dielectric barrier discharge reactor integrated with a deflector ring. By synergistically optimizing the electrode topology and modulating the flow field, this reactor achieves enhanced removal of complex ammonia–sulfur odor mixtures. The underlying mechanisms were elucidated through computational fluid dynamics (CFD) simulations coupled with systematic performance evaluation. Experimental results demonstrate that an 8-needle electrode configuration provides the optimal balance between discharge density and energy efficiency. CFD simulations further reveal that the deflector ring effectively suppresses gas bypass and promotes recirculation vortices downstream, thereby extending the residence time significantly. Mechanistic studies indicate that the removal of recalcitrant inorganic sulfides (e.g., CS2 and H2S) follows a synergistic mass-transfer–reaction controlled process, which is markedly improved by flow field optimization. In contrast, organic sulfides are governed primarily by chemical kinetics and show little dependence on flow variations. Under an extremely short residence time of 0.57 s (corresponding to a flow rate of 2.0 m3/h) and an ultra-low specific energy input of 6.26 J/L, the system achieved nearly complete removal of organic sulfides. Even for challenging inorganic sulfides, removal efficiencies reached 80.9% for H2S and 45.3% for CS2, while O3/NOx/SO2 byproducts were quantified. For industrial deployment, these byproducts can be managed by standard downstream polishing. By effectively coordinating discharge characteristics with flow dynamics, this study provides both theoretical insight and technical support for the development of next-generation, energy-efficient, high-throughput industrial odor control systems.

  • Open Access

    A Novel Multi-Needle-to-Cylinder Dielectric Barrier Discharge Reactor with Deflector Rings for Energy-Efficient Removal of Sulfides and Ammonia from Odor Gases

    by Qi Qiu, Zhuojun Zhang, Qianbing Xu, Yu Zhang, Wuhua Li, Xiangning He

    Non-thermal plasma is a promising technology for odor abatement from agricultural and domestic waste. However, its widespread application is often limited by the inherent trade-off between energy efficiency and processing capacity in conventional reactors. To address this challenge, we propose a novel multi-needle-to-cylinder dielectric barrier discharge reactor integrated with a deflector ring. By synergistically optimizing the electrode topology and modulating the flow field, this reactor achieves enhanced removal of complex ammonia–sulfur odor mixtures. The underlying mechanisms were elucidated through computational fluid dynamics (CFD) simulations coupled with systematic performance evaluation. Experimental results demonstrate that an 8-needle electrode configuration provides the optimal balance between discharge density and energy efficiency. CFD simulations further reveal that the deflector ring effectively suppresses gas bypass and promotes recirculation vortices downstream, thereby extending the residence time significantly. Mechanistic studies indicate that the removal of recalcitrant inorganic sulfides (e.g., CS₂ and H₂S) follows a synergistic mass-transfer–reaction controlled process, which is markedly improved by flow field optimization. In contrast, organic sulfides are governed primarily by chemical kinetics and show little dependence on flow variations. Under an extremely short residence time of 0.57 s (corresponding to a flow rate of 2.0 m³/h) and an ultra-low specific energy input of 6.26 J/L, the system achieved nearly complete removal of organic sulfides. Even for challenging inorganic sulfides, removal efficiencies reached 80.9% for H₂S and 45.3% for CS₂, with negligible byproduct formation. By effectively coordinating discharge characteristics with flow dynamics, this study provides both theoretical insight and technical support for the development of next-generation, energy-efficient, high-throughput industrial odor control systems.