Hongsha Xiao
Research Subjects
Hongsha Xiao has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Ruihan Zhang
State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Shuang Li
Sichuan Changning Natural Gas Development Co., Ltd., Chengdu 610041, China
2 shared publications - Siliang He
State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China
2 shared publications - Bo Lei
Sichuan Changning Natural Gas Development Co., Ltd., Chengdu 610041, China
1 shared publication - Chao Chen
Sichuan Changning Natural Gas Development Co., Ltd., Chengdu 610041, China
1 shared publication - Haoran Tang
School of Petroleum and Natural Gas Engineering, Southwest Petroleum University, Chengdu 610500, China
1 shared publication
Latest Publications
- Open Access
- 10 November 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (22) , 1455
Loading–Unloading Stress-Sensitivity Experiments and a Mathematical Model for Self-Propped and Proppant-Filled Shale Fractures
A stepwise loading–unloading pressure path was applied to three self-propped and three proppant-filled shale fracture plugs. The propped plugs were tested sequentially with 40/70-mesh quartz sand and ceramic at nominal gaps of 1, 2, and 4 mm. All nine runs showed permeability hysteresis. Observed terminal loss was 63.9–82.7% for self-propped fractures, 57.8–64.0% for quartz-sand runs, and 14.6–23.5% for ceramic runs. A piecewise stress-path model was fitted to all nine runs using a loading coefficient, a history exponent, and a fitted residual-loss parameter to represent the distinct loading and unloading branches. The results quantify stress-path dependence for these tested fracture configurations and provide a laboratory-scale permeability relation for considering loading history in parent–child well studies.
- 10 November 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (22) , 1455
Open AccessLoading–Unloading Stress-Sensitivity Experiments and a Mathematical Model for Self-Propped and Proppant-Filled Shale Fractures
A stepwise loading–unloading pressure path was applied to three self-propped and three proppant-filled shale fracture plugs. The propped plugs were tested sequentially with 40/70-mesh quartz sand and ceramic at nominal gaps of 1, 2, and 4 mm. All nine runs showed permeability hysteresis. Observed terminal loss was 63.9–82.7% for self-propped fractures, 57.8–64.0% for quartz-sand runs, and 14.6–23.5% for ceramic runs. A piecewise stress-path model was fitted to all nine runs using a loading coefficient, a history exponent, and a fitted residual-loss parameter to represent the distinct loading and unloading branches. The results quantify stress-path dependence for these tested fracture configurations and provide a laboratory-scale permeability relation for considering loading history in parent–child well studies.
- Open Access
- 17 February 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (4) , 264
A Transient Two−Phase Productivity Forecasting Method in Fractured Nanoporous Shale Gas Reservoirs
Hydraulic fracturing is a critical technology for developing shale gas reservoirs, which are typical natural nanoporous media. However, the complex two−phase flow induced by fracturing fluid retention and the strong interference among hydraulic fractures introduce significant uncertainties to productivity forecasting. To address these challenges, this study proposes a transient productivity forecasting method to characterize fluid transport in fractured nanoporous media. This method introduces a gas−water two−phase pseudo−pressure function to reconstruct the flow equations, utilizing micro−segment discretization and the principle of superposition to accurately characterize pressure drop interference among fractures, enabling rapid dynamic productivity forecasting under realistic well trajectory conditions. The investigation reveals that while increasing fracture count, half−length, and permeability enhances productivity, these improvements exhibit significant diminishing marginal returns, indicating the existence of optimal economic thresholds for these engineering parameters. Conversely, elevated water saturation, skin factor, and stress sensitivity lead to a decline in productivity. Analysis of flow interference demonstrates that fractures at the wellbore extremities contribute significantly higher production than those in the central section due to reduced interference, while deviations in the wellbore trajectory further exacerbate production heterogeneity. Field application confirms that the proposed method achieves reliable production history matching under realistic well trajectories and accurately captures the typical three−stage production characteristics of shale gas wells, providing a robust basis for Estimated Ultimate Recovery (EUR) assessment and fracturing design optimization.
- 17 February 2026
- Published by MDPI AG in Nanomaterials
- Vol. 16 (4) , 264
Open AccessA Transient Two−Phase Productivity Forecasting Method in Fractured Nanoporous Shale Gas Reservoirs
Hydraulic fracturing is a critical technology for developing shale gas reservoirs, which are typical natural nanoporous media. However, the complex two−phase flow induced by fracturing fluid retention and the strong interference among hydraulic fractures introduce significant uncertainties to productivity forecasting. To address these challenges, this study proposes a transient productivity forecasting method to characterize fluid transport in fractured nanoporous media. This method introduces a gas−water two−phase pseudo−pressure function to reconstruct the flow equations, utilizing micro−segment discretization and the principle of superposition to accurately characterize pressure drop interference among fractures, enabling rapid dynamic productivity forecasting under realistic well trajectory conditions. The investigation reveals that while increasing fracture count, half−length, and permeability enhances productivity, these improvements exhibit significant diminishing marginal returns, indicating the existence of optimal economic thresholds for these engineering parameters. Conversely, elevated water saturation, skin factor, and stress sensitivity lead to a decline in productivity. Analysis of flow interference demonstrates that fractures at the wellbore extremities contribute significantly higher production than those in the central section due to reduced interference, while deviations in the wellbore trajectory further exacerbate production heterogeneity. Field application confirms that the proposed method achieves reliable production history matching under realistic well trajectories and accurately captures the typical three−stage production characteristics of shale gas wells, providing a robust basis for Estimated Ultimate Recovery (EUR) assessment and fracturing design optimization.
- Open Access
Production Dynamics of Hydraulic Fractured Horizontal Wells in Shale Gas Reservoirs Based on Fractal Fracture Networks and the EDFM
The development of shale gas reservoirs relies on complex fracture networks created via multistage hydraulic fracturing, yet most existing models still use oversimplified fracture geometries and therefore cannot fully capture the coupled effects of multiscale fracture topology on flow and production. To address this gap, in this study, we combine fractal geometry with the Embedded Discrete Fracture Model (EDFM) to analyze the production dynamics of hydraulically fractured horizontal wells in shale gas reservoirs. A tree-like fractal fracture network is first generated using a stochastic fractal growth algorithm, where the iteration number, branching number, scale factor, and deviation angle control the self-similar hierarchical structure and spatial distribution of fractures. The resulting fracture network is then embedded into an EDFM-based, fully implicit finite-volume simulator with Non-Neighboring Connections (NNCs) to represent multiscale fracture–matrix flow. A synthetic shale gas reservoir model, constructed using representative geological and engineering parameters and calibrated against field production data, is used for all numerical experiments. The results show that increasing the initial water saturation from 0.20 to 0.35 leads to a 26.4% reduction in cumulative gas production due to enhanced water trapping. Optimizing hydraulic fracture spacing to 200 m increases cumulative production by 3.71% compared with a 100 m spacing, while longer fracture half-lengths significantly improve both early-time and stabilized gas rates. Increasing the fractal iteration number from 1 to 3 yields a 36.4% increase in cumulative production and markedly enlarges the pressure disturbance region. The proposed fractal–EDFM framework provides a synthetic yet field-calibrated tool for quantifying the impact of fracture complexity and design parameters on shale gas well productivity and for guiding fracture network optimization.
Open AccessProduction Dynamics of Hydraulic Fractured Horizontal Wells in Shale Gas Reservoirs Based on Fractal Fracture Networks and the EDFM
The development of shale gas reservoirs relies on complex fracture networks created via multistage hydraulic fracturing, yet most existing models still use oversimplified fracture geometries and therefore cannot fully capture the coupled effects of multiscale fracture topology on flow and production. To address this gap, in this study, we combine fractal geometry with the Embedded Discrete Fracture Model (EDFM) to analyze the production dynamics of hydraulically fractured horizontal wells in shale gas reservoirs. A tree-like fractal fracture network is first generated using a stochastic fractal growth algorithm, where the iteration number, branching number, scale factor, and deviation angle control the self-similar hierarchical structure and spatial distribution of fractures. The resulting fracture network is then embedded into an EDFM-based, fully implicit finite-volume simulator with Non-Neighboring Connections (NNCs) to represent multiscale fracture–matrix flow. A synthetic shale gas reservoir model, constructed using representative geological and engineering parameters and calibrated against field production data, is used for all numerical experiments. The results show that increasing the initial water saturation from 0.20 to 0.35 leads to a 26.4% reduction in cumulative gas production due to enhanced water trapping. Optimizing hydraulic fracture spacing to 200 m increases cumulative production by 3.71% compared with a 100 m spacing, while longer fracture half-lengths significantly improve both early-time and stabilized gas rates. Increasing the fractal iteration number from 1 to 3 yields a 36.4% increase in cumulative production and markedly enlarges the pressure disturbance region. The proposed fractal–EDFM framework provides a synthetic yet field-calibrated tool for quantifying the impact of fracture complexity and design parameters on shale gas well productivity and for guiding fracture network optimization.