Mingxuan Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mingxuan Liang has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Qing-Yi Guo
Department of Electrical Engineering, State Key Laboratory of Terahertz and Millimeter Waves, City University of Hong Kong, Hong Kong, China
4 shared publications - Hang Wong
City University of Hong Kong
1 shared publication Qiwei Fu
College of Electronics and Information Engineering, State Key Laboratory of Radio Frequency Heterogeneous Integration, Shenzhen University, Shenzhen, China
1 shared publicationZhi Lian Peng
State Key Laboratory of Radio Frequency Heterogeneous Integration, College of Electronics and Information Engineering, Shenzhen University, Shenzhen, China
1 shared publication- Zhuoqiao Ji
Shenzhen Polytechnic University, Shenzhen, China
1 shared publication
Latest Publications
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6091-6101
A Miniaturized, Wideband, and High-Gain Omnidirectional Dielectric Filled Fabry--Pérot Cavity Antenna
This paper proposes a methodology for designing a wideband, high-gain omnidirectional antenna by utilizing the Fabry–Pérot cavity (FPC) effect. It is the first attempt to apply high dielectric constant materials to fill the cavity, forming the proposed dielectric filled cavity (DFC). It not only reduces the size of the antenna, but also provides intrinsic partially reflection at the interface between dielectric and air, contributing to the elimination of a separate PRS. Furthermore, the proposed FPC architecture is developed to be an omnidirectional structure while keeping wideband and high-gain radiation. The proposed antenna consists of the DFC, a modified omnidirectional stepped reflector (MOSR), and a horizontally polarized omnidirectional feeding source. The MOSR can be used to excite multiple resonant modes and manipulate the phase distribution on radiation aperture, enhancing bandwidth and gain. For verification, an antenna prototype based on the above operating principles is designed, fabricated and measured. It achieves an impedance bandwidth of 19.61% and a peak gain of 6.2 dBi. The gain fluctuation is less than 1 dB within the operating bandwidth. Compared with other omnidirectional antennas, the proposed design possesses the characteristics of wideband, high-gain, and a compact size. It is a good candidate for indoor coverage equipment with penetrability and corrosion-resistant outdoor cellular terminals.
- 16 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (7) , 6091-6101
A Miniaturized, Wideband, and High-Gain Omnidirectional Dielectric Filled Fabry--Pérot Cavity Antenna
This paper proposes a methodology for designing a wideband, high-gain omnidirectional antenna by utilizing the Fabry–Pérot cavity (FPC) effect. It is the first attempt to apply high dielectric constant materials to fill the cavity, forming the proposed dielectric filled cavity (DFC). It not only reduces the size of the antenna, but also provides intrinsic partially reflection at the interface between dielectric and air, contributing to the elimination of a separate PRS. Furthermore, the proposed FPC architecture is developed to be an omnidirectional structure while keeping wideband and high-gain radiation. The proposed antenna consists of the DFC, a modified omnidirectional stepped reflector (MOSR), and a horizontally polarized omnidirectional feeding source. The MOSR can be used to excite multiple resonant modes and manipulate the phase distribution on radiation aperture, enhancing bandwidth and gain. For verification, an antenna prototype based on the above operating principles is designed, fabricated and measured. It achieves an impedance bandwidth of 19.61% and a peak gain of 6.2 dBi. The gain fluctuation is less than 1 dB within the operating bandwidth. Compared with other omnidirectional antennas, the proposed design possesses the characteristics of wideband, high-gain, and a compact size. It is a good candidate for indoor coverage equipment with penetrability and corrosion-resistant outdoor cellular terminals.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1199-1203
A Large-Frequency Ratio RF Device With Dual-Circularly Polarized Antenna and Bandpass Filter Integration
This letter proposes an RF device that integrates dual-circularly polarized antenna (DCPA) and bandpass filter (BPF) functions. It is the first attempt to utilize the square slots for radiating energy of a DCPA at millimeter-wave (mm-W) band, and simultaneously serving as the feeding structure for a BPF operating at microwave band. The DCPA function involves exciting two square slots to generate dual-polarized (DP) radiations, which are then passed through two 3D-printed polarizers placed above the slots to generate directional circularly polarized (CP) beams. Also, two resonators are constructed above the square slots, forming a filtering circuit for the BPF function. In this way, the slots serve as both the radiation aperture for DCPA at mm-W band and the feeding structures for the BPF operating at microwave band. For measurement results, the DCPA function has a 18.7% overlapped bandwidth for 3-dB axial ratio (AR) and impedance matching from 36.2 to 43.7 GHz, with a high isolation level of 32 dB between two ports and an average realized gain of 13.7 dBic. The BPF function has a measured impedance matching bandwidth of 6.8% from 5.65 to 6.05 GHz, with an average insertion loss of 2.2 dB.
- 5 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1199-1203
A Large-Frequency Ratio RF Device With Dual-Circularly Polarized Antenna and Bandpass Filter Integration
This letter proposes an RF device that integrates dual-circularly polarized antenna (DCPA) and bandpass filter (BPF) functions. It is the first attempt to utilize the square slots for radiating energy of a DCPA at millimeter-wave (mm-W) band, and simultaneously serving as the feeding structure for a BPF operating at microwave band. The DCPA function involves exciting two square slots to generate dual-polarized (DP) radiations, which are then passed through two 3D-printed polarizers placed above the slots to generate directional circularly polarized (CP) beams. Also, two resonators are constructed above the square slots, forming a filtering circuit for the BPF function. In this way, the slots serve as both the radiation aperture for DCPA at mm-W band and the feeding structures for the BPF operating at microwave band. For measurement results, the DCPA function has a 18.7% overlapped bandwidth for 3-dB axial ratio (AR) and impedance matching from 36.2 to 43.7 GHz, with a high isolation level of 32 dB between two ports and an average realized gain of 13.7 dBic. The BPF function has a measured impedance matching bandwidth of 6.8% from 5.65 to 6.05 GHz, with an average insertion loss of 2.2 dB.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3663-3668
A PRS-Less Resonant Cavity Antenna With Suppressed Sidelobe and Compact Size
Reducing size and side lobe level (SLL) is essential for resonant cavity (RC) type antenna. This paper proposes a PRS-less RC antenna with compact size, low profile and sidelobes. It is the first attempt to apply a hybrid cavity with a dielectric slab and a shaped ground with power manipulation (SGPM) function. Different from traditional un-equal power dividers utilized in array, herein, we proposed the SGPM to manipulate power distribution on the radiation aperture of a RC antenna. In addition, due to the utilization of the dielectric slab, intrinsic partially reflection can be occurred at the aperture interface between the dielectric and air. This achieves RC response while eliminating the usage of a separate partially reflective surface (PRS), which is often independently required in a conventional RC antenna. For validation, a prototype using the proposed design method is fabricated and measured. Its profile is 0.25 λ0. The SLL of the design is less than 18 dB across the operating band. Its peak aperture efficiency can reach to 69.1%. The overlapped operating bandwidth exceeds 13%. Compared to other RC antennas, the proposed design has characteristics of miniaturization, wideband, PRS-less, low SLL and low-profile.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 74 (4) , 3663-3668
A PRS-Less Resonant Cavity Antenna With Suppressed Sidelobe and Compact Size
Reducing size and side lobe level (SLL) is essential for resonant cavity (RC) type antenna. This paper proposes a PRS-less RC antenna with compact size, low profile and sidelobes. It is the first attempt to apply a hybrid cavity with a dielectric slab and a shaped ground with power manipulation (SGPM) function. Different from traditional un-equal power dividers utilized in array, herein, we proposed the SGPM to manipulate power distribution on the radiation aperture of a RC antenna. In addition, due to the utilization of the dielectric slab, intrinsic partially reflection can be occurred at the aperture interface between the dielectric and air. This achieves RC response while eliminating the usage of a separate partially reflective surface (PRS), which is often independently required in a conventional RC antenna. For validation, a prototype using the proposed design method is fabricated and measured. Its profile is 0.25 λ0. The SLL of the design is less than 18 dB across the operating band. Its peak aperture efficiency can reach to 69.1%. The overlapped operating bandwidth exceeds 13%. Compared to other RC antennas, the proposed design has characteristics of miniaturization, wideband, PRS-less, low SLL and low-profile.