OLOlli Luukkonen

Olli Luukkonen

*This is an algorithmically generated author record based on publicly available information.

Olli Luukkonen has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nanostructures for very broadband or multi-frequency transition from wave beams to a subwavelength light distributions

    by O. Luukkonen, J. Pniewski, C. Simovski

    In this paper we suggest and theoretically study a tapered plasmonic nanostructure which connects the incident wave beam with a subwavelength spatial region where the field is locally enhanced in a broad frequency range or for different operation frequencies. This spatial region has a frequency stable location near the contour of the tapered structure. This results from a special waveguide mode which can also exist in the tapered structure. We foresee many possible applications for our structure from prospective near-field scanning optical microscopes to interconnects between conventional optical waveguides and prospective optical nanocircuits.

  • Open Access

    Grounded Uniaxial Material Slabs as Magnetic Conductors

    by Olli Luukkonen, Constantin R. Simovski, Sergei A. Tretyakov

    The objective of this paper is all-angle artificial magnetic conductor, i.e. artificial magnetic conductor that has stable magnetic-wall effect with respect to the incidence angle. Furthermore, we seek for a design that would be easy for manufacturing. In order to achieve this we use grounded uniaxial material slabs and we do not constrict ourselves to naturally available materials. Instead, we assume that the desired parameters can be synthesized using the emerging artificial electromagnetic materials. It is found that it is possible to have an all-angle magnetic-wall effect for both TE and TM polarization. Especially for the TM fields the structure would be easily manufacturable. The proposed structure has similar appearance as more well-known artificial impedance surfaces, but the design parameters and the physical properties behind the magnetic wall effect are novel. The performance of the proposed artificial magnetic conductor is verified with numerical simulations. This paper introduces a new approach how to obtain a magnetic-wall effect. It is possible to use this this approach also together with other ways of obtaining the magnetic-wall effect for dual-band operation.

  • Open Access

    Effects of Spatial Dispersion on Reflection from Mushroom-type Artificial Impedance Surfaces

    by Olli Luukkonen, Mário G. Silveirinha, Alexander B. Yakovlev, Constantin R. Simovski, Igor S. Nefedov, Sergei A. Tretyakov

    Several recent works have emphasized the role of spatial dispersion in wire media, and demonstrated that arrays of parallel metallic wires may behave very differently from a uniaxial local material with negative permittivity. Here, we investigate using local and non-local homogenization methods the effect of spatial dispersion on reflection from the mushroom structure introduced by Sievenpiper. The objective of the paper is to clarify the role of spatial dispersion in the mushroom structure and demonstrate that under some conditions it is suppressed. The metamaterial substrate, or metasurface, is modeled as a wire medium covered with an impedance surface. Surprisingly, it is found that in such configuration the effects of spatial dispersion may be nearly suppressed when the slab is electrically thin, and that the wire medium can be modeled very accurately using a local model. This result paves the way for the design of artificial surfaces that exploit the plasmonic-type response of the wire medium slab.

  • Open Access

    A Thin Electromagnetic Absorber for Wide Incidence Angles and Both Polarizations

    by Olli Luukkonen, Filippo Costa, Agostino Monorchio, Sergei A. Tretyakov

    In this paper a planar electromagnetic absorber is introduced whose performance is maintained over a wide change of the incidence angle for both TE and TM polarization. The absorber comprises an array of patches over a grounded dielectric slab, with clear advantage in terms of manufacturability. It is shown that a high value of the relative permittivity of the substrate is essential for the operation of the absorber. The main contribution of the paper is to demonstrate and practically use the presence of an additional resonance of high-impedance surfaces when the plasma frequency of the wire medium comprising metallic vias in the dielectric substrate is close to the original resonance of the high-impedance surface. The presence of the vias between FSS and the ground plane is discussed both for the case of a high-permittivity absorber and for a low permittivity one. The radius of the vias influences the oblique incidence TM absorption, and when properly designed, the insertion of the vias result in bandwidth enlargement and higher absorption.

  • Open Access

    An Efficient and Simple Analytical Model for Analysis of Propagation Properties in Impedance Waveguides

    by Olli Luukkonen, Constantin R. Simovski, Antti V. Räisänen, Sergei A. Tretyakov

    In this paper propagation properties of a parallel-plate waveguide with tunable artificial impedance surfaces as sidewalls are studied both analytically and numerically. The impedance surfaces comprise an array of patches over a dielectric slab with embedded metallic vias. The tunability of surfaces is achieved with varactors. Simple design equations for tunable artificial impedance surfaces as well as dispersion equations for the TE and TM modes are presented. The propagation properties are studied in three different regimes: a multi-mode waveguide, a single-mode waveguide, and below-cutoff waveguide. The analytical results are verified with numerical simulations.

  • Open Access

    Simple and accurate analytical model of planar grids and high-impedance surfaces comprising metal strips or patches

    by Olli Luukkonen, Constantin Simovski, Gérard Granet, George Goussetis, Dmitri Lioubtchenko, Antti V. Räisänen, Sergei Tretyakov

    This paper introduces simple analytical formulas for the grid impedance of electrically dense arrays of square patches and for the surface impedance of high-impedance surfaces based on the dense arrays of metal strips or square patches over ground planes. Emphasis is on the oblique-incidence excitation. The approach is based on the known analytical models for strip grids combined with the approximate Babinet principle for planar grids located at a dielectric interface. Analytical expressions for the surface impedance and reflection coefficient resulting from our analysis are thoroughly verified by full-wave simulations and compared with available data in open literature for particular cases. The results can be used in the design of various antennas and microwave or millimeter wave devices which use artificial impedance surfaces and artificial magnetic conductors (reflect-array antennas, tunable phase shifters, etc.), as well as for the derivation of accurate higher-order impedance boundary conditions for artificial (high-) impedance surfaces. As an example, the propagation properties of surface waves along the high-impedance surfaces are studied.

  • Open Access

    A three-dimensional backward-wave network matched with free space

    by Pekka Alitalo, Olli Luukkonen, Sergei Tretyakov

    A backward-wave slab based on a capacitively and inductively loaded three-dimensional transmission-line network is designed in such a way that impedance-matching with free space is obtained. To enable field propagation from free space to the network and vice versa, the use of a transition layer is proposed. Matching of the designed network with free space and negative refraction occurring at the slab interfaces are confirmed with full-wave simulations.

  • Open Access

    Microstrip antenna miniaturization using partial dielectric material filling

    by Olli Luukkonen, Pekka Ikonen, Sergei Tretyakov

    In this paper we study microstrip antenna miniaturization using partial filling of the antenna volume with dielectric materials. An analytical expression is derived for the quality factor of an antenna loaded with a combination of two different materials. This expression can be used to optimize the filling pattern for the design that most efficiently retains the impedance bandwidth after size reduction. Qualitative design rules are given, and a miniaturization example is provided where the antenna performance is compared for different filling patterns. Results given by the analytical model are verified with numerical simulations and experiments. Key words: Microstrip antenna, miniaturization, partial filling, impedance bandwidth, quality factor.