Yuchen Yan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yuchen Yan has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Fei Wan
Research Institute of Highway Ministry of Transport, Beijing 100088, China
2 shared publications - Hongfei Shen
Research Institute of Highway Ministry of Transport, Beijing 100088, China
2 shared publications - Nian Zhang
College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2 shared publications - Shuai Li
College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2 shared publications - Wenjun Xie
College of Civil Engineering, Taiyuan University of Technology, Taiyuan 030024, China
2 shared publications - Xuan Zhang
Research Institute of Highway Ministry of Transport, Beijing 100088, China
2 shared publications
Latest Publications
- Open Access
- 20 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 1033
Study on Influencing Factors of Blockage Signals in Highway Tunnel Drainage Pipelines Using Distributed Acoustic Sensing Technology
To address the impact of environmental and equipment factors on signal identification in highway tunnel drainage pipeline blockage monitoring, this study aims to elucidate the influence patterns of pipeline flow rate, optical fiber deployment scheme, and fiber performance on blockage-induced acoustic signals. A full-scale concrete pipeline experimental platform was established. Data were acquired using a HIFI-DAS V2 sensing system. The time–frequency domain characteristics of acoustic signals under different flow rates (50 m3/h and 100 m3/h), fiber deployment schemes (inside the pipe, outside the pipe, and outside a soundproofing layer), and fiber materials (six typical types) were analyzed and compared. The degree of influence of each factor on signal amplitude and dominant frequency components was quantified. The experimental results indicate that: Compared to a flow rate of 50 m3/h, the amplitude characteristic value at the blockage channel exhibited a marked increase at 100 m3/h, accompanied by an increase in the number and amplitude of dominant frequency components. While the dominant frequency components of the acoustic signals were less stable across the three deployment schemes, the overall amplitude at the blockage channel was consistently higher than that at non-blockage channels. When the fiber was deployed farther from the fluid core (outside the soundproofing layer), the dominant frequencies essentially disappeared, with energy distributed in a broadband form. The peak amplitude and array energy of the sensitive vibration sensing fiber were 2 times and 3.6 times those of the worst-performing type, respectively. Furthermore, its physical properties are better suited to the tunnel environment, effectively enhancing signal acquisition stability and the signal-to-noise ratio. Comprehensive analysis demonstrates that deploying sensitive fibers inside the pipe is more conducive to the accurate identification of blockage events. Moreover, uniform dominant frequency components and threshold criteria are not recommended along the entire length of the drainage pipe. This research provides theoretical and experimental support for parameter optimization of DAS systems to achieve high-precision pipeline blockage monitoring in complex tunnel environments.
- 20 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (2) , 1033
Open AccessStudy on Influencing Factors of Blockage Signals in Highway Tunnel Drainage Pipelines Using Distributed Acoustic Sensing Technology
To address the impact of environmental and equipment factors on signal identification in highway tunnel drainage pipeline blockage monitoring, this study aims to elucidate the influence patterns of pipeline flow rate, optical fiber deployment scheme, and fiber performance on blockage-induced acoustic signals. A full-scale concrete pipeline experimental platform was established. Data were acquired using a HIFI-DAS V2 sensing system. The time–frequency domain characteristics of acoustic signals under different flow rates (50 m3/h and 100 m3/h), fiber deployment schemes (inside the pipe, outside the pipe, and outside a soundproofing layer), and fiber materials (six typical types) were analyzed and compared. The degree of influence of each factor on signal amplitude and dominant frequency components was quantified. The experimental results indicate that: Compared to a flow rate of 50 m3/h, the amplitude characteristic value at the blockage channel exhibited a marked increase at 100 m3/h, accompanied by an increase in the number and amplitude of dominant frequency components. While the dominant frequency components of the acoustic signals were less stable across the three deployment schemes, the overall amplitude at the blockage channel was consistently higher than that at non-blockage channels. When the fiber was deployed farther from the fluid core (outside the soundproofing layer), the dominant frequencies essentially disappeared, with energy distributed in a broadband form. The peak amplitude and array energy of the sensitive vibration sensing fiber were 2 times and 3.6 times those of the worst-performing type, respectively. Furthermore, its physical properties are better suited to the tunnel environment, effectively enhancing signal acquisition stability and the signal-to-noise ratio. Comprehensive analysis demonstrates that deploying sensitive fibers inside the pipe is more conducive to the accurate identification of blockage events. Moreover, uniform dominant frequency components and threshold criteria are not recommended along the entire length of the drainage pipe. This research provides theoretical and experimental support for parameter optimization of DAS systems to achieve high-precision pipeline blockage monitoring in complex tunnel environments.
- Open Access
- 4 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 491
Experimental Investigation of Acoustic Signal Characteristics of Blockages in Highway Tunnel Drainage Pipelines Using Distributed Acoustic Sensing
This study aims to quantitatively assess blockage conditions in highway tunnel drainage pipelines using acoustic wave signals. A full-scale physical model of a drainage pipeline was constructed to simulate six blockage ratio conditions ranging from 12.5% to 75%. Distributed Acoustic Sensing (DAS) technology was employed to collect acoustic signals along the pipeline. Time-domain analysis and Fast Fourier Transform (FFT)-based frequency-domain analysis were conducted to compare the waveform amplitude and dominant frequency components between blocked and unobstructed pipeline sections. The results demonstrate a significant increase in time-domain amplitude at the blockage location, with a maximum enhancement of up to 50% compared to unobstructed sections. In the frequency domain, this phenomenon is particularly pronounced within specific dominant frequency bands (core frequency bands). For instance, the 395–405 Hz band was identified as the core band under the 50% blockage ratio condition. Furthermore, the time-domain amplitude at the blockage shows a positive correlation with the blockage ratio (12.5–75%). The comprehensive analysis indicates that the time-domain characteristics of DAS-based acoustic signals can effectively identify both the location and severity of blockages in highway tunnel drainage pipelines. This research provides fundamental data for evaluating the blockage state of tunnel drainage systems based on acoustic signatures.
- 4 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 491
Open AccessExperimental Investigation of Acoustic Signal Characteristics of Blockages in Highway Tunnel Drainage Pipelines Using Distributed Acoustic Sensing
This study aims to quantitatively assess blockage conditions in highway tunnel drainage pipelines using acoustic wave signals. A full-scale physical model of a drainage pipeline was constructed to simulate six blockage ratio conditions ranging from 12.5% to 75%. Distributed Acoustic Sensing (DAS) technology was employed to collect acoustic signals along the pipeline. Time-domain analysis and Fast Fourier Transform (FFT)-based frequency-domain analysis were conducted to compare the waveform amplitude and dominant frequency components between blocked and unobstructed pipeline sections. The results demonstrate a significant increase in time-domain amplitude at the blockage location, with a maximum enhancement of up to 50% compared to unobstructed sections. In the frequency domain, this phenomenon is particularly pronounced within specific dominant frequency bands (core frequency bands). For instance, the 395–405 Hz band was identified as the core band under the 50% blockage ratio condition. Furthermore, the time-domain amplitude at the blockage shows a positive correlation with the blockage ratio (12.5–75%). The comprehensive analysis indicates that the time-domain characteristics of DAS-based acoustic signals can effectively identify both the location and severity of blockages in highway tunnel drainage pipelines. This research provides fundamental data for evaluating the blockage state of tunnel drainage systems based on acoustic signatures.