G. Iyappan
Research Subjects
G. Iyappan has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- G. Sriharan1 shared publication
- J. Thivya1 shared publication
- Shamim Ahsan
Electronics and Communication Engineering Discipline, Khulna University, Khulna, Bangladesh
1 shared publication - Subramani Narayanasarma
Department of Mechanical Engineering, National Institute of Technology Calicut, Calicut, India
1 shared publication - Vijayaraghavan Jagadeesan
University College of Engineering Ramanathapuram, India
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Experimental Investigation of Fly Ash‐Based Foam Bricks: Sustainable Mix Design and Its Performance
The growing influence of green building materials has increased the pace in terms of utilizing industrial byproducts like fly ash as alternative materials to the normal clay bricks in construction. This study provides an elaborate experimental study of the fly‐ash‐foam bricks with the aim of reducing environmental challenges posed by the brick manufacturing processes that are energy and carbon‐demanding. This paper investigates how the proportion of different fly ash and foaming agents affects these key performance parameters: compressive strength, water absorption, efflorescence, and dry density. Results show that when a 1:2 mix ratio was used without a foaming agent, the compressive strength peaked at 10.595 N/mm 2 , and the compressive strength was lower at 5.43 N/mm 2 when a foaming agent was added because of higher internal porosity. Water absorption was also increased in the presence of the foaming agent to 12.75% in foamed mixes as compared to 3.55% in unfoamed specimens. Furthermore, the dry density of wet mix had dropped to 1482.2 and 938.7 kg/m 3 in the dense mix and the 1:4 foamed mix, respectively, with an intermediate increase in efflorescence. These findings carry an importance of balancing the blend composition to achieve a balance between low weight and sufficient mechanical integrity, and advance the use of fly‐ash‐based foam bricks as a feasible, sustainable material in modern construction activities.
- 1 January 2025
- Published by Wiley in Advances in Civil Engineering
- Vol. 2025 (1)
Open AccessExperimental Investigation of Fly Ash‐Based Foam Bricks: Sustainable Mix Design and Its Performance
The growing influence of green building materials has increased the pace in terms of utilizing industrial byproducts like fly ash as alternative materials to the normal clay bricks in construction. This study provides an elaborate experimental study of the fly‐ash‐foam bricks with the aim of reducing environmental challenges posed by the brick manufacturing processes that are energy and carbon‐demanding. This paper investigates how the proportion of different fly ash and foaming agents affects these key performance parameters: compressive strength, water absorption, efflorescence, and dry density. Results show that when a 1:2 mix ratio was used without a foaming agent, the compressive strength peaked at 10.595 N/mm 2 , and the compressive strength was lower at 5.43 N/mm 2 when a foaming agent was added because of higher internal porosity. Water absorption was also increased in the presence of the foaming agent to 12.75% in foamed mixes as compared to 3.55% in unfoamed specimens. Furthermore, the dry density of wet mix had dropped to 1482.2 and 938.7 kg/m 3 in the dense mix and the 1:4 foamed mix, respectively, with an intermediate increase in efflorescence. These findings carry an importance of balancing the blend composition to achieve a balance between low weight and sufficient mechanical integrity, and advance the use of fly‐ash‐based foam bricks as a feasible, sustainable material in modern construction activities.