Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Canhuang Li has a total of 75 co-authors. Here are the top co-authors by number of shared publications:

  • Andreu Cabot

    Catalonia Institute for Energy Research – IREC, Sant Adrià de Besòs, Barcelona 08930, Spain

    6 shared publications
  • Chaoqi Zhang

    College of Materials Science and Engineering, Fuzhou University, No.2, Xueyuan Road, Minhou County, Fuzhou City, Fujian Province 350108, China

    4 shared publications
  • Chen Huang

    Catalonia Institute for Energy Research - IREC Sant Adrià de Besòs

    3 shared publications
  • Jordi Arbiol

    Catalan Institute of Nanoscience and Nanotechnology (ICN2) CSIC and BIST Campus UAB Bellaterra Barcelona Catalonia 08193 Spain

    3 shared publications
  • Bingfei Nan

    Catalonia Institute for Energy Research‐IREC Sant Adrià de Besòs Barcelona 08930 Spain

    2 shared publications
  • Jin Yuan Zhou

    Key Laboratory for Magnetism and Magnetic Materials of the Ministry of Education & School of Physical Science & Technology Lanzhou University Lanzhou 730000 China

    2 shared publications

Latest Publications

  • Ca2+-Preintercalated V2O5 as a Dual-Function Cathode Additive for Polyiodide Anchoring in Zn–I2 Batteries

    by Xiaoyu Bi, Ao Yu, Jing Zhang, Jing Yu, Canhuang Li, Yuchuan Ren, Kaifu Lin, Jiali Chai, Qian Xue, Yanting Xie, et al.

    Aqueous zinc-iodine (Zn-I2) batteries have attracted considerable attention due to their abundant resources, high safety, and environmental friendliness. However, challenges inherent to conversion-type electrodes, including severe active material shuttling and suboptimal Coulombic efficiency, continue to limit their performance. Here, we present a high-performance Zn-I2 battery enabled by calcium-ion-preintercalated V2O5 (CaVO) nanobelts as a cathode additive. By harnessing the synergistic effects of physical trapping (via activated carbon and interlayer confinement in CaVO) and chemical adsorption (through Ca2+ binding sites), the hybrid host framework achieves superior immobilization of iodine species while simultaneously shortening Zn2+ diffusion pathways, thereby facilitating efficient I0/I- redox kinetics. Furthermore, Ca-induced crystal structure modification enhances the Zn2+ transport and provides additional capacity contributions. As a result, Zn-I2 cells employing I2-loaded CaVO (CaVO/AC@I2) composite cathodes deliver a high specific capacity of 244 mAh g-1 at 0.2 A g-1, outstanding rate performance with 78.5% capacity retention at 5 A g-1, and an impressive energy density of 279 Wh kg-1, based on the combined mass of I2 and CaVO. This work presents a hybrid energy storage strategy for Zn-I2 systems, providing a feasible approach for the development of next-generation high-performance aqueous batteries.


  • Electronic Spin Alignment within Homologous NiS2/NiSe2 Heterostructures to Promote Sulfur Redox Kinetics in Lithium‐Sulfur Batteries

    by Chen Huang, Jing Yu, Chao Yue Zhang, Zhibiao Cui, Jiakun Chen, Wei‐Hong Lai, Yao‐Jie Lei, Bingfei Nan, Xuan Lu, Ren He, et al.

    The catalytic activation of the Li‐S reaction is fundamental to maximize the capacity and stability of Li‐S batteries (LSBs). Current research on Li‐S catalysts mainly focuses on optimizing the energy levels to promote adsorption and catalytic conversion, while frequently overlooking the electronic spin state influence on charge transfer and orbital interactions. Here, hollow NiS2/NiSe2 heterostructures encapsulated in a nitrogen‐doped carbon matrix (NiS2/NiSe2@NC) are synthesized and used as a catalytic additive in sulfur cathodes. The NiS2/NiSe2 heterostructure promotes the spin splitting of the 3d orbital, driving the Ni3+ transformation from low to high spin. This high spin configuration raises the electronic energy level and activates the electronic state. This accelerates the charge transfer and optimizes the adsorption energy, lowering the reaction energy barrier of the polysulfides conversion. Benefiting from these characteristics, LSBs based on NiS2/NiSe2@NC/S cathodes exhibit high initial capacity (1458 mAh·g⁻1 at 0.1C), excellent rate capability (572 mAh·g⁻1 at 5C), and stable cycling with an average capacity decay rate of only 0.025% per cycle at 1C during 500 cycles. Even at high sulfur loadings (6.2 mg·cm⁻2), high initial capacities of 1173 mAh·g⁻1 (7.27 mAh·cm⁻2) are measured at 0.1C, and 1058 mAh·g⁻1 is retained after 300 cycles.


  • Highly Conductive Quasi‐1D Hexagonal Chalcogenide Perovskite Sr 8 Ti 7 S 21 with Efficient Polysulfide Regulation in Lithium‐Sulfur Batteries

    by Dawei Yang, Yanbing Han, Mengyao Li, Canhuang Li, Wei Bi, Qianhong Gong, Jie Zhang, Jinglu Zhang, Yingtang Zhou, Han Gao, et al.

    Lithium‐sulfur batteries (LSBs) are regarded as one of the most promising candidates for next‐generation energy storage systems. However, the commercialization of LSBs is still hindered by several technical issues, including the notorious polysulfide migration from the cathode to the anode and the sluggish sulfur conversion kinetics. Herein, a quasi‐1D hexagonal chalcogenide perovskite, Sr 8 Ti 7 S 21 , is demonstrated as an efficient sulfur host able to overcome these limitations. Experimental results and density functional theory calculations show Sr 8 Ti 7 S 21 to offer strong lithium polysulfides (LiPS) binding through multiple bond formation. Besides, Sr 8 Ti 7 S 21 effectively facilitates the kinetics of the LiPS redox reaction. As a result, S@Sr 8 Ti 7 S 21 ‐based cathodes exhibit excellent initial capacities up to 1315 mAh g −1 at 0.2C, impressive cycling stability with an average capacity decay rate of 0.08% per cycle over 400 cycles at 1C, and a high areal capacity of 6.58 mAh cm −2 under a high sulfur loading of 6.5 mg cm −2 . This work reveals the potential capabilities and promising prospects of chalcogenide perovskites in advancing LSBs technology.


  • Combined Defect and Heterojunction Engineering in ZnTe/CoTe2@NC Sulfur Hosts Toward Robust Lithium–Sulfur Batteries

    by Chen Huang, Jing Yu, Canhuang Li, Zhibiao Cui, Chaoqi Zhang, Chaoyue Zhang, Bingfei Nan, Junshan Li, Jordi Arbiol, Andreu Cabot

    Lithium–sulfur batteries (LSBs) are feasible candidates for the next generation of energy storage devices, but the shuttle effect of lithium polysulfides (LiPSs) and the poor electrical conductivity of sulfur and lithium sulfides limit their application. Herein, a sulfur host based on nitrogen‐doped carbon (NC) coated with small amount of a transition metal telluride (TMT) catalyst is proposed to overcome these limitations. The properties of the sulfur redox catalyst are tuned by adjusting the anion vacancy concentration and engineering a ZnTe/CoTe2 heterostructures. Theoretical calculations and experimental data demonstrate that tellurium vacancies enhance the adsorption of LiPSs, while the formed TMT/TMT and TMT/C heterostructures as well as the overall architecture of the composite simultaneously provide high Li+ diffusion and fast electron transport. As a result, v‐ZnTe/CoTe2@NC/S sulfur cathodes show excellent initial capacities up to 1608 mA h g−1 at 0.1C and stable cycling with an average capacity decay rate of 0.022% per cycle at 1C during 500 cycles. Even at a high sulfur loading of 5.4 mg cm–2, a high capacity of 1273 mA h g−1 at 0.1C is retained, and when reducing the electrolyte to 7.5 µL mg−1, v‐ZnTe/CoTe2@NC/S still maintains a capacity of 890.8 mA h g−1 after 100 cycles at 0.1C.


  • Open Access

    Tubular C3N4 Nanotubes as Metal-Free Sulfur Hosts toward Stable Lithium–Sulfur Batteries

    by Chaoqi Zhang, Ruifeng Du, Sara Martí-Sánchez, Ke Xiao, Dawei Yang, Chaoyue Zhang, Canhuang Li, Guifang Zeng, Xingqi Chang, Ren He, et al.

    Lithium–sulfur batteries (LSBs) with high energy density have the potential to replace current commercial lithium-ion batteries. However, the shuttle effect and the low conversion kinetics of lithium polysulfide (LiPS) remain the main challenges in the development of LSBs. In this study, a metal-free and simple-to-prepare carbon nitride with a high surface area and tubular morphology (CN-nt) is used as the sulfur host for LSBs. Due to its unique nanostructure and rich active sites, it not only effectively disperses the active sulfur material and anchors soluble polysulfide species, but it also promotes the nucleation process of Li2S, thus achieving fast and sustainable Li-S redox reactions. Experimental results show that the obtained S@CN-nt electrodes exhibit a high sulfur utilization of 1296.2 mAh g−1 at 0.1 C and a significant rate capability of 689.4 mAh g−1 at the high current rate of 3C. More importantly, the capacity retention reaches 87.7% after 500 cycles. This simple strategy of engineering unique carbon-based nanostructured hosts can inspire new ideas for developing cost-effective and metal-free host materials for sulfur-based batteries.


  • Open Access

    Surface strain-enhanced MoS2 as a high-performance cathode catalyst for lithium–sulfur batteries

    by Chao Yue Zhang, Chaoqi Zhang, Jiang Long Pan, Guo Wen Sun, Zude Shi, Canhuang Li, Xingqi Chang, Geng Zhi Sun, Jin Yuan Zhou, Andreu Cabot


  • 3,3‐Diethylene Di‐Sulfite (DES) as a High‐Voltage Electrolyte Additive for 4.5 V LiNi0.8Co0.1Mn0.1O2/Graphite Batteries with Enhanced Performances

    by Shuai Li, Canhuang Li, Tianxiang Yang, Wenlian Wang, Jing Lu, Weizhen Fan, Xiaoyang Zhao, Xiaoxi Zuo, Shaolong Tie, Junmin Nan

    A functional electrolyte containing 3,3‐diethylene di‐sulfite (DES) additive is developed to improve the performances of LiNi0.8Co0.1Mn0.1O2 (NCM811)/graphite batteries, especially at high charging cut‐off voltage of 4.50 V. It is indicated that under the conventional conditions of 25 °C and 1 C after 300 cycles in the voltage range of 2.75–4.30 V, the batteries with 0.25 % DES can increase the maximum capacity retention from 66.61 % to 77.25 % initial discharge capacity compared with the batteries without DES. Especially, when the charge cut‐off voltage is increased to 4.50 V, the batteries with 1 % DES exhibit higher capacity retention (82.53 %) after 150 cycles than the batteries without DES (51.19 %). The electrochemical tests and spectroscopic characterization show that this functional DES electrolyte additive well regulates the anode and cathode interfaces with more stabilized films and smaller impedance, which promotes the interfacial extraction and insertion of Li+. In addition, the interfacial film can inhibit the dissolution of the transition metal element Ni from the cathode and protect the structure stability of NCM811 material. The electrolyte containing DES additive reveals promising prospects in the application of NCM811/graphite batteries.


  • Phosphorus‐Containing C12H27O4P as Functional Electrolyte Additives for High‐Voltage LiNi0.5Mn1.5O4/Graphite Li‐Ion Batteries with Excellent Electrochemical Performance

    by Canhuang Li, Siyong Wu, Yijing Qiu, Dongsheng Lu

    As the most promising cathode material in new energy resources, LiNi0.5Mn1.5O4 (LNMO) are widely researched due to its high platform, low cost, and environment‐friendliness, when they are assembled with graphite into battery which can lead to a faster capacity decay because of unstable solid–liquid interface. This work is devoted to stabilize electrolyte and protect interface of LNMO/graphite full battery by adding multifunctional additive, tributyl phosphate (TBP). Theory calculation which exhibits disconnection of TBP can participate in the reaction to form a uniform and dense cathode electrolyte interface film (8–10 nm) and solid electrolyte interface film around 15 nm on both electrodes, more importantly, the existence of phosphoric acid functional group can hinder the attack of hydrofluoric acid and protect electrode film. Besides, comparing with its homolog, the high‐voltage LiNi0.5Mn1.5O4/graphite battery with 1% TBP shows a preponderant discharged capacity retention of 77.8% after 150 cycles, while the blank is only 66%, this work provides a direction for electrolyte additives’ selection at high voltage and has far‐reaching significance for the application of phosphate ester materials.