Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiaoya Wu has a total of 66 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Numerical Simulation Study on Hydraulic Fracturing Development via Radial Wells in Gas Hydrate Reservoirs with Varying Initial Saturations

    by Chengyu Hui, Mingzhe Gu, Xiaoya Wu, Yihao Du, Chunyang Hong, Ke Sun, Wanting Jia, Guobin Zhang, Longlian Cui, Quanyu Jiang

    Natural gas hydrate is a potentially efficient clean energy resource, and fracturing-based production has been demonstrated to be an effective method for hydrate recovery. This study focuses on a clayey silt hydrate reservoir in the South China Sea and investigates the stimulation performance and geomechanical response of radial well fracturing, with particular attention to the effects of initial hydrate saturation on gas productivity and geological deformation. A reservoir model is constructed using the CMG STARS numerical simulator, incorporating measured geological data from Site SH07 in the Shenhu area of the South China Sea, and five simulation cases are designed to represent different initial hydrate saturation conditions. The results indicate that initial hydrate saturation affects hydrate development efficiency by controlling seepage resistance, pressure drop propagation, and heat supply. Moreover, initial hydrate saturation exerts dual control on geological deformation through its influence on effective stress and Young’s modulus. As the initial hydrate saturation increases from 0.25 to 0.45, the total geological deformation after three years of production decreases by 61.7%. These findings provide theoretical support for the safe and efficient development of such reservoirs and for the optimization of operational strategies.

  • Open Access

    Experimental Study on Reservoir Scaling Mechanisms and Porosity–Permeability Evolution During Geothermal Reinjection

    by Xinfeng Guo, Shiyuan Yu, Xiaohao Yang, Hao Li, Jinxia Liu, Mingtao Fan, Xin Xia, Xiaoya Wu, Hao Peng

    Geothermal reinjection is essential for sustainable geothermal energy utilization, yet reservoir scaling triggered by water–rock interactions remains a critical obstacle to long-term operation, and the coupling mechanisms between scaling and pore-permeability evolution remain unclear. In this work, high-temperature and high-pressure reinjection experiments were conducted on natural and artificial sandstone cores, combined with ICP-OES, XRD, SEM and X-CT characterizations, to reveal scaling mechanisms and porosity-permeability evolution patterns. Temperature-ramp tests with deionized water (50–100 °C) demonstrate that thermal expansion and thermally induced clay mobilization reduce permeability by 62.52% in natural cores and 68.76% in artificial cores, verifying that temperature elevation alone can induce significant permeability impairment. Under 80 °C synthetic formation water reinjection, water–rock interaction-driven scaling decreases permeability by over 15% (natural cores) and 29.34% (artificial cores). Calcite dominates scaling products, showing dispersed distribution in natural cores and preferential pore-throat deposition in artificial cores. These findings clarify the coupling law of mineral composition and scaling deposition on pore structure evolution, and can provide a scientific reference for scaling prevention and field reinjection management of sandstone geothermal reservoirs.

  • Open Access

    Study on the Hole Formation Characteristics of Cavitation Jet Erosion in Hydrate-Bearing Sediments

    by Xiaoya Wu, Haizhu Shi, Yixuan Wang, Yiqun Zhang

    The cavitation jet is regarded as a promising hydraulic rock-breaking technique for drilling and exploiting deep-sea natural gas hydrate (NGH). However, the detailed mechanisms of erosion pit formation in hydrate-bearing sediments (HBSs) under cavitation jet erosion remain unclear, and effective simulation methods are still limited. This study first conducts jet erosion experiments on HBSs using a convergent–divergent cavitation jet nozzle (CDCJ) and a conical jet (CJ) nozzle to evaluate the erosion performance of the CDCJ. The CDCJ is then applied to erode HBS specimens under different flow rates, erosion times, and stand-off distances, with the geometric characteristics of the erosion pits recorded. Subsequently, a coupled CFD-DEM framework is developed to further investigate the erosion process and mechanisms. Based on this model, the erosion characteristics of the cavitation jet at different stages and under varying jet parameters are analyzed and validated. The results show that the CDCJ exhibits a significantly stronger erosion capacity than the CJ, with the pit volume and depth reaching 1.36 and 1.19 times those produced by the CJ, respectively. The hole-forming process induced by the cavitation jet can be divided into three stages: the V-shaped hole-forming stage, the cylindrical hole-forming stage, and the spindle-shaped hole-forming stage. In the V-shaped hole-forming stage, jet impingement and the penetrating erosion of cavitation clouds dominate pit development. As erosion progresses, the axial impingement gradually weakens, whereas radial cutting decays more slowly. Meanwhile, vortices inside the pit trap cavitation clouds and promote further hole enlargement. Both the experiments and simulations indicate that higher flow rates produce larger and deeper pits, and a standoff distance of 5 mm is optimal for cavitation erosion. These findings clarify the hole-forming mechanism and flow-field evolution during the cavitation erosion of HBSs, and provide guidance for the application of the cavitation jet in NGH drilling and exploitation.

  • Open Access

    The Design and Research of a New Cavitation-Jet Blockage-Removal Tool

    by Xinfeng Guo, Junjie Zhang, Hao Li, Jinxia Liu, Mengxuan Li, Yuqi Sun, Yiqun Zhang, Xiaoya Wu

    Wellbore plugging has become the primary constraint on gas production for numerous oil, gas, and geothermal wells in China. To enhance productivity in mature wells, a novel straight-swirling integrated jet (SSIJ) deplugging tool was designed, incorporating a converging-diverging jet (CDJ) nozzle. A combined approach of numerical simulation and experiments was employed to optimize the tool structure and evaluate the effects of different operational parameters on its blockage-removal performance. Structural optimization identified an impeller spinning angle of 540° and an impeller thickness of 12 mm as the optimal parameters, which significantly improve the three-dimensional velocity peaks and cavitation generation capability. Compared with the CDJ nozzle, the SSIJ tool produces substantially higher tangential and radial velocity components, with peak tangential and radial velocities reaching 22 m/s and 45 m/s, respectively, under the optimized conditions. The numerical results show that the peak impact pressure reaches 2.7 MPa at a standoff distance of 12 mm, while the optimal standoff distance, considering both impact magnitude and effective coverage area, is determined to be 16 mm (4 times the outlet diameter). Furthermore, indoor validation experiments under a pump pressure of 20 MPa demonstrate that the tool completely removes the artificial scale layer from the tubing inner wall within 2 min of continuous flushing, leaving no visible residue. This study provides a quantitative reference for the design and process optimization of jet blockage-removal tools.

  • Experimental investigation of the cavitation bubble pulsation behavior under methane bubble interference

    by Haochen Huang, Yiqun Zhang, Yunlong Jiang, Xiaoya Wu, Gensheng Li

    Cavitation is a promising technology used to enhance drilling efficiency, treat wastewater, and remove scale, and plays an important role in various types of pumps and propellers. However, its interaction with in situ bubbles remains poorly understood. This study investigates the pulsation behavior of laser-induced cavitation bubbles in an environment containing methane bubbles using a high-speed camera and a hydrophone. Experiments were conducted under controlled thermal conditions, with varying methane bubble sizes and distribution. Key indicators, initial pulsation time and acoustic intensity at collapse, are used to evaluate the pulsation behavior. The results show that both of them gradually increase with the growth of the relative distance between the cavitation bubble, the wall, and the methane bubbles. The asymmetric methane bubble distribution pattern has a greater effect on the cavitation bubble pulsation behavior than the symmetric distribution, with the maximum initial pulsation time reaching up to 114% of the control and corresponding to 119% of the symmetric distribution case in the experiments. The methane bubble influence coefficient was constructed in the case of symmetric methane bubbles, which shows a linear relationship with the dimensionless cavitation bubble pulsation time. Furthermore, methane bubbles have a positive effect on cavitation bubbles after the total center distance of methane bubbles reaches a certain amount. These findings highlight the dual influence of methane bubbles on cavitation dynamics and provide insights into the pulsation behavior of cavitation bubbles within multi-bubble systems.


  • Analysis on the hole-forming rules of hydrate-bearing sediments broken by cavitation jet

    by Xiaoya Wu, Haizhu Shi, Yiqun Zhang, Yixuan Wang

    Cavitation jet has emerged as a drilling rate improvement technology in oceanic natural gas hydrate (NGH) exploitation. Previous studies have primarily used jet flow field data to analyze the effects of cavitation jets, while the hole-forming details of hydrate-bearing sediments (HBS) erosion by cavitation jet are still not clear. In this work, the jet breaking experiments for synthetic HBS samples are performed using conical and angular nozzles. The morphological characteristics of various erosion pits are obtained and the corresponding dimensions, such as diameter, depth, and volume are recorded. Then, the process of HBS erosion by conical jet and angular cavitation jet are analyzed with fluid-solid coupling simulation, to identify the temporal evolution of erosion pits. The experimental results verify that the angular cavitation jet has stronger erosion performance than conical jet. The depth and volume of the erosion pit formed by the angular cavitation jet are 1.3 times and 1.2 times that of the conical jet, respectively. And the angular cavitation jet shows superiority in aperture enlargement. The simulated results reveal that the hydraulic high-efficiency drilling of angular cavitation jet mainly benefits from the enormous power emitted by cavitation bubbles. For angular cavitation jet, as the jet migrates and impacts on the HBS model, a V-shaped hole is formed. Subsequently, the cavitation bubbles reach the bottom and side of the erosion pit, collapse, and destroy the cemented structure of HBS. The erosion pit expands rapidly and appears cylindrical. Meanwhile, a reverse jet is formed after the main jet hits the bottom. The reverse jet constantly crushes the side wall of erosion pit and enlarges the erosion pit. Finally, a spindle shaped hole is obtained. This study reveals the hole-forming rules of HBS broken by cavitation jet and provides a reference on the structure optimization of cavitation jet nozzle applied in NGH recovery.

  • Erosion characteristics of hydrate-bearing sediments exposed to a cavitation jet

    by Xiaoya Wu, Yu Qin, Haizhu Shi, Zhaowen Hu, Yiqun Zhang, Gensheng Li, Shouceng Tian


  • Open Access

    Numerical Simulation on Erosion and Stress on a Small-Diameter Hydrajet Fracturing Tool

    by Zhenqiang Xu, Xu Cui, Jing Zhang, Kaixiang Shen, Xiaoya Wu, Yiqun Zhang

    Conventional hydrajet fracturing techniques are often frustrated when they are applied to some specific well types, such as casing-damaged and small-diameter wells. It is of great significance to investigate the erosion and stress on a small-diameter hydrajet fracturing tool during its service and clarify the relevant influencing factors. Based on the solid-liquid two-phase flow theory and erosion model, a numerical simulation was conducted on the erosion and stress on a small-diameter hydrajet fracturing tool by using the computational fluid dynamics approach in order to understand how the inlet flow rate, particle size, and particle mass concentration affect the erosion and stress on the tool. The results show that the erosion on the small-diameter hydrajet fracturing tool is generally a cutting erosion of proppant particles on the tool body. Such erosion occurs on the lower wall of the nozzle, and the erosion at the upper-0(degrees) nozzle is higher in rate and smaller in area than that at the lower-180(degrees) nozzle. The maximum stress of the small-diameter hydrajet fracturing tool is concentrated on the upper and lower walls of the upper and lower nozzles, especially the lower part inside the upper nozzle. The maximum erosion rate, average erosion rate, and maximum stress on the wall near the nozzle during fracturing increase as the inlet flow rate and particle mass concentration increase and decrease as the proppant particle size increases.


  • Numerical analysis of the production behaviors and geomechanical responses during natural gas hydrate production by vertical wells fracturing

    by Chengyu Hui, Yiqun Zhang, Xiaoya Wu, Panpan Zhang, Gensheng Li, Jingsheng Lu, Bo Zhang


  • Numerical Simulation on Coupling Behaviors of Sand Production and Mechanical Response during NGH Exploitation by Depressurization from the Argillaceous Reservoir

    by Kaixiang Shen, Youkeren An, Zhenqiang Xu, Xiaoya Wu, Panpan Zhang, Yiqun Zhang, Jingsheng Lu, Chengyu Hui