Alisher Jabborov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alisher Jabborov has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Adham Norkobilov
Shahrisabz Faculty of Food Engineering, Karshi State Technical University, 20, Shahrisabz Street, Shahrisabz 181306, Uzbekistan
1 shared publication - Ahror Tuychiev
Department of Industrial Engineering and Management, Karshi State Technical University, 225, Mustakillik Shoh Street, Karshi 180100, Uzbekistan
1 shared publication - Alisher Rakhimov
Department of Industrial Engineering and Management, Karshi State Technical University, Karshi 180100, Uzbekistan
1 shared publication - Azizbek Kamolov
Department of Automation and Digital Control, Tashkent Institute of Chemical Technology, Tashkent 100011, Uzbekistan
1 shared publication - Dilfuza Ungboyeva
Department of Automation and Digital Control, Tashkent Chemical-Technological Institute, Tashkent 100011, Uzbekistan
1 shared publication - Jaloliddin Eshbobaev
Department of Automation and Digital Control, Tashkent Institute of Chemical Technology, Tashkent 100011, Uzbekistan
1 shared publication
Latest Publications
- Open Access
- 13 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 51
A Fuzzy Logic-Based Temperature Prediction Model for Indirect Solar Dryers Using Mamdani Inference Under Natural Convection Conditions
The drying process in indirect solar dryers is strongly influenced by rapidly changing ambient conditions, resulting in highly nonlinear and dynamic system behavior. Accurate modeling is therefore essential for performance evaluation, process optimization, and reliable prediction of the drying chamber temperature, which plays a key role in ensuring efficient moisture removal while preserving the nutritional and sensory quality of dried products. In this study, a fuzzy logic–based modeling approach using the Mamdani inference system is developed to predict the drying chamber temperature over a wide range of operating conditions. Experimental measurements were carried out with solar radiation varying from 400 to 950 W/m2 and ambient temperature ranging from 20 to 50 °C, covering both static and dynamic system responses. The fuzzy model employs solar radiation and ambient temperature as input variables, represented by five and three triangular membership functions, respectively, while the drying chamber temperature is defined as the output variable using five triangular membership functions (T1–T5). The Mamdani inference system consists of 15 “if–then” rules, and centroid defuzzification is applied to obtain crisp output values. Model validation across the investigated operating range demonstrates a strong agreement between predicted and experimental temperatures. For example, at a solar radiation of 700 W/m2 and an ambient temperature of 46 °C, the predicted chamber temperature is 50.9 °C compared to a measured value of 51.0 °C, while at 750 W/m2 and 50 °C, the predicted temperature of 52.0 °C closely matches the experimental value of 51.8 °C. Statistical evaluation yields RMSE = 0.38 °C, MAE = 0.29 °C, and R2 = 0.997, demonstrating effective temperature tracking capability within the tested operating range. These results show that the Mamdani fuzzy logic approach can effectively represent the thermal behavior of an indirect solar dryer within the tested operating range. The proposed model also provides a promising basis for the future development of real-time intelligent control strategies aimed at improving energy efficiency and product quality.
- 13 February 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 51
Open AccessA Fuzzy Logic-Based Temperature Prediction Model for Indirect Solar Dryers Using Mamdani Inference Under Natural Convection Conditions
The drying process in indirect solar dryers is strongly influenced by rapidly changing ambient conditions, resulting in highly nonlinear and dynamic system behavior. Accurate modeling is therefore essential for performance evaluation, process optimization, and reliable prediction of the drying chamber temperature, which plays a key role in ensuring efficient moisture removal while preserving the nutritional and sensory quality of dried products. In this study, a fuzzy logic–based modeling approach using the Mamdani inference system is developed to predict the drying chamber temperature over a wide range of operating conditions. Experimental measurements were carried out with solar radiation varying from 400 to 950 W/m2 and ambient temperature ranging from 20 to 50 °C, covering both static and dynamic system responses. The fuzzy model employs solar radiation and ambient temperature as input variables, represented by five and three triangular membership functions, respectively, while the drying chamber temperature is defined as the output variable using five triangular membership functions (T1–T5). The Mamdani inference system consists of 15 “if–then” rules, and centroid defuzzification is applied to obtain crisp output values. Model validation across the investigated operating range demonstrates a strong agreement between predicted and experimental temperatures. For example, at a solar radiation of 700 W/m2 and an ambient temperature of 46 °C, the predicted chamber temperature is 50.9 °C compared to a measured value of 51.0 °C, while at 750 W/m2 and 50 °C, the predicted temperature of 52.0 °C closely matches the experimental value of 51.8 °C. Statistical evaluation yields RMSE = 0.38 °C, MAE = 0.29 °C, and R2 = 0.997, demonstrating effective temperature tracking capability within the tested operating range. These results show that the Mamdani fuzzy logic approach can effectively represent the thermal behavior of an indirect solar dryer within the tested operating range. The proposed model also provides a promising basis for the future development of real-time intelligent control strategies aimed at improving energy efficiency and product quality.
- Open Access
- 20 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 28
Development of an ANFIS-Based Intelligent Control System for Free Chlorine Removal from Industrial Wastewater Using Ion-Exchange Resin
The removal of residual free chlorine ions from industrial wastewater is a critical step toward achieving sustainable and environmentally compliant water reuse. Excess chlorine in sludge collector water causes corrosion of process equipment, inhibits biological treatment, and leads to toxic discharge effects. In this study, an intelligent control strategy was developed for an ion-exchange-based dechlorination process to dynamically regulate chlorine concentration in the effluent stream. A pilot-scale ion-exchange filtration unit, designed with a nominal capacity of 500 L h−1, was constructed using a strong-base anion-exchange resin to selectively adsorb chloride and free chlorine ions. A total of 200 experimental observations were obtained to characterize the nonlinear relationship between inlet flow rate and outlet chlorine concentration under varying operational conditions. Based on these experimental data, an Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed in MATLABR2025 to simulate and control the ion-exchange process. Two model-optimization techniques, Grid Partition + Hybrid and Subtractive Clustering + Hybrid, were applied. The subtractive clustering approach demonstrated faster convergence and superior accuracy, achieving RMSE = 0.147 mg L−1, MAE = 0.101 mg L−1, and R2 = 0.993, outperforming the grid-partition model (RMSE ≈ 0.29, R2 ≈ 0.97). The resulting ANFIS model was subsequently integrated into a MATLAB/Simulink-based intelligent control system for real-time regulation of chlorine concentration. A comparative dynamic simulation was performed between the proposed ANFIS controller and a conventional PID (Proportional-Differential-Integral) controller. The results revealed that the ANFIS controller achieved a faster response (rise time ≈ 28 s), lower overshoot (≈6%), and shorter settling time (≈90 s) compared to the PID controller (rise time ≈ 35 s, overshoot ≈ 18%, settling time ≈ 120 s). These improvements demonstrate the ability of the proposed model to adapt to nonlinear process behavior and to maintain stable operation under varying flow conditions.
- 20 January 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 117 (1) , 28
Open AccessDevelopment of an ANFIS-Based Intelligent Control System for Free Chlorine Removal from Industrial Wastewater Using Ion-Exchange Resin
The removal of residual free chlorine ions from industrial wastewater is a critical step toward achieving sustainable and environmentally compliant water reuse. Excess chlorine in sludge collector water causes corrosion of process equipment, inhibits biological treatment, and leads to toxic discharge effects. In this study, an intelligent control strategy was developed for an ion-exchange-based dechlorination process to dynamically regulate chlorine concentration in the effluent stream. A pilot-scale ion-exchange filtration unit, designed with a nominal capacity of 500 L h−1, was constructed using a strong-base anion-exchange resin to selectively adsorb chloride and free chlorine ions. A total of 200 experimental observations were obtained to characterize the nonlinear relationship between inlet flow rate and outlet chlorine concentration under varying operational conditions. Based on these experimental data, an Adaptive Neuro-Fuzzy Inference System (ANFIS) model was developed in MATLABR2025 to simulate and control the ion-exchange process. Two model-optimization techniques, Grid Partition + Hybrid and Subtractive Clustering + Hybrid, were applied. The subtractive clustering approach demonstrated faster convergence and superior accuracy, achieving RMSE = 0.147 mg L−1, MAE = 0.101 mg L−1, and R2 = 0.993, outperforming the grid-partition model (RMSE ≈ 0.29, R2 ≈ 0.97). The resulting ANFIS model was subsequently integrated into a MATLAB/Simulink-based intelligent control system for real-time regulation of chlorine concentration. A comparative dynamic simulation was performed between the proposed ANFIS controller and a conventional PID (Proportional-Differential-Integral) controller. The results revealed that the ANFIS controller achieved a faster response (rise time ≈ 28 s), lower overshoot (≈6%), and shorter settling time (≈90 s) compared to the PID controller (rise time ≈ 35 s, overshoot ≈ 18%, settling time ≈ 120 s). These improvements demonstrate the ability of the proposed model to adapt to nonlinear process behavior and to maintain stable operation under varying flow conditions.