Yanghao Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanghao Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Hang Xu
School of Microelectronics, Fudan University, Shanghai 200433, China
8 shared publications David Wei Zhang
National Key Laboratory of Integrated Chips and Systems and School of Microelectronics, Fudan University, Shanghai, China
7 shared publications- Qingqing Sun
Fudan University
7 shared publications Jianbin Guo
National Key Laboratory of Integrated Chips and Systems and School of Microelectronics, Fudan University, Shanghai, China
4 shared publications- Peng Liao
School of Microelectronics, Fudan University, Shanghai, China
3 shared publications - Peng Liao
National Key Laboratory of Integrated Chips and Systems and School of Microelectronics, Fudan University, Shanghai, China
3 shared publications
Latest Publications
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3337-3347
Comparative Degradation Analysis of 1200 V SiC MOSFETs With Different Gate Structures Under High Drain Bias Stress
Silicon carbide (SiC) MOSFETs are emerging as key components in next-generation electric vehicle powertrains, owing to their superior material properties. However, under automotive harsh conditions such as load dump or inductive shutdown, the device may experience extreme drain voltage stress near or beyond avalanche breakdown, raising reliability concerns. This study compares the degradation behavior of three commercial 1200V SiC MOSFETs with planar-gate (PG), asymmetric-trench (AT), and double-trench (DT) structures under stepwise high drain voltage stress. Results reveal distinct degradation modes: PG and AT show hard breakdown behavior, with abrupt parameter shifts after breakdown, while in DT, a source-side punchthrough-assisted leakage evolution leads to a practical degradation onset at the punchthrough onset voltage VPT ( $\approx 1600$ V), beyond which persistent leakage drives progressive pre-breakdown degradation. TCAD simulations reveal that degradation originates from hole injection and trapping in the gate oxide at the SiO2/SiC interface, driven by the combined effects of interfacial electric field and hole current. In PG and AT, degradation results from avalanche-generated holes injected into the oxide after breakdown, while in DT, persistent leakage and hole injection due to base region punchthrough cause severe post-VPT and prebreakdown degradation. A composite metric F (interface electric field $\times $ hole current density) is proposed to quantify the hole injection effectiveness and correlates well with the experimental degradation trends. Hole injection is more pronounced in the JFET region than in the channel region, leading to significant capacitance degradation. The deep P+ shield structure of AT effectively suppresses interface electric field and limits the active JFET area, achieving superior reliability under high drain bias stress. These findings underscore the importance of interfacial field mitigation and punchthrough suppression in enhancing the robustness of SiC MOSFETs for high-voltage automotive applications.
- 24 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3337-3347
Comparative Degradation Analysis of 1200 V SiC MOSFETs With Different Gate Structures Under High Drain Bias Stress
Silicon carbide (SiC) MOSFETs are emerging as key components in next-generation electric vehicle powertrains, owing to their superior material properties. However, under automotive harsh conditions such as load dump or inductive shutdown, the device may experience extreme drain voltage stress near or beyond avalanche breakdown, raising reliability concerns. This study compares the degradation behavior of three commercial 1200V SiC MOSFETs with planar-gate (PG), asymmetric-trench (AT), and double-trench (DT) structures under stepwise high drain voltage stress. Results reveal distinct degradation modes: PG and AT show hard breakdown behavior, with abrupt parameter shifts after breakdown, while in DT, a source-side punchthrough-assisted leakage evolution leads to a practical degradation onset at the punchthrough onset voltage VPT ( $\approx 1600$ V), beyond which persistent leakage drives progressive pre-breakdown degradation. TCAD simulations reveal that degradation originates from hole injection and trapping in the gate oxide at the SiO2/SiC interface, driven by the combined effects of interfacial electric field and hole current. In PG and AT, degradation results from avalanche-generated holes injected into the oxide after breakdown, while in DT, persistent leakage and hole injection due to base region punchthrough cause severe post-VPT and prebreakdown degradation. A composite metric F (interface electric field $\times $ hole current density) is proposed to quantify the hole injection effectiveness and correlates well with the experimental degradation trends. Hole injection is more pronounced in the JFET region than in the channel region, leading to significant capacitance degradation. The deep P+ shield structure of AT effectively suppresses interface electric field and limits the active JFET area, achieving superior reliability under high drain bias stress. These findings underscore the importance of interfacial field mitigation and punchthrough suppression in enhancing the robustness of SiC MOSFETs for high-voltage automotive applications.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2640-2647
Polarity-Dependent Electric Field Modulation via Depletion Region Punchthrough in IGBTs Under Gate-Collector Coupled Stress
Insulated gate bipolar transistors (IGBTs) are subjected to critical combined gate-collector voltage stress under extreme off-state blocking and on-state saturation conditions, presenting serious reliability challenges. This study identifies a severe degradation mode under such conditions and clarifies its physical origin. Electrical measurements and TCAD simulations reveal that under negative gate voltage with positive collector bias, the IGBT exhibits a strong positive threshold voltage shift and parallel rightward drift in capacitance–voltage characteristics. Both degradation features intensify with increasing collector voltage, far exceeding the effects observed under single stress conditions. The underlying mechanism is attributed to depletion region punchthrough modulated gate oxide field: high collector voltage causes full depletion layer penetration across the drift region, reshaping and amplifying the vertical electric field in the gate oxide. This enhanced field substantially increases electron injection from the polysilicon gate through Fowler–Nordheim (F–N) tunneling, resulting in significant charge trapping and device degradation. TCAD simulations validate this mechanism by demonstrating the depletion behavior, field distribution, and trap accumulation. Crucially, IGBTs with thicker drift regions show minimal degradation in both threshold voltage and $C$ – $V$ characteristics under identical stress, as punchthrough is prevented, providing further confirmation of the proposed mechanism. These findings uncover a critical reliability concern in IGBTs under high-voltage coupled stress and offer valuable guidance for robust power device design.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (5) , 2640-2647
Polarity-Dependent Electric Field Modulation via Depletion Region Punchthrough in IGBTs Under Gate-Collector Coupled Stress
Insulated gate bipolar transistors (IGBTs) are subjected to critical combined gate-collector voltage stress under extreme off-state blocking and on-state saturation conditions, presenting serious reliability challenges. This study identifies a severe degradation mode under such conditions and clarifies its physical origin. Electrical measurements and TCAD simulations reveal that under negative gate voltage with positive collector bias, the IGBT exhibits a strong positive threshold voltage shift and parallel rightward drift in capacitance–voltage characteristics. Both degradation features intensify with increasing collector voltage, far exceeding the effects observed under single stress conditions. The underlying mechanism is attributed to depletion region punchthrough modulated gate oxide field: high collector voltage causes full depletion layer penetration across the drift region, reshaping and amplifying the vertical electric field in the gate oxide. This enhanced field substantially increases electron injection from the polysilicon gate through Fowler–Nordheim (F–N) tunneling, resulting in significant charge trapping and device degradation. TCAD simulations validate this mechanism by demonstrating the depletion behavior, field distribution, and trap accumulation. Crucially, IGBTs with thicker drift regions show minimal degradation in both threshold voltage and $C$ – $V$ characteristics under identical stress, as punchthrough is prevented, providing further confirmation of the proposed mechanism. These findings uncover a critical reliability concern in IGBTs under high-voltage coupled stress and offer valuable guidance for robust power device design.
- 20 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3321-3327
Performance Degradation and Reliability of 4H-SiC MOSFETs at Extreme Low Temperatures
This study systematically investigates the cryogenic reliability of a 650 V silicon carbide (SiC) MOSFET for extreme-environment applications, using the 650 V silicon IGBT as a performance benchmark. Measurements and technology computer-aided design (TCAD) simulations demonstrate that the SiC MOSFET experiences severe performance degradation below 200 K due to carrier freeze-out, which manifests as significant threshold voltage instability and pronounced C–V hysteresis. In stark contrast, the silicon IGBT maintains stable switching and robust gate integrity down to 150 K. These results define the low-temperature operational boundary and identify the carrier freeze-out mechanism as the root cause, providing essential guidance for the reliable application of wide bandgap (WBG) SiC devices in extreme cold environments.
- 20 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 73 (6) , 3321-3327
Performance Degradation and Reliability of 4H-SiC MOSFETs at Extreme Low Temperatures
This study systematically investigates the cryogenic reliability of a 650 V silicon carbide (SiC) MOSFET for extreme-environment applications, using the 650 V silicon IGBT as a performance benchmark. Measurements and technology computer-aided design (TCAD) simulations demonstrate that the SiC MOSFET experiences severe performance degradation below 200 K due to carrier freeze-out, which manifests as significant threshold voltage instability and pronounced C–V hysteresis. In stark contrast, the silicon IGBT maintains stable switching and robust gate integrity down to 150 K. These results define the low-temperature operational boundary and identify the carrier freeze-out mechanism as the root cause, providing essential guidance for the reliable application of wide bandgap (WBG) SiC devices in extreme cold environments.
- Open Access
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 14, 70-78
Research on Degradation of P-FinFET Under Mixed NBTI and HCD Stress
In this paper, the stress degradation of P-channel Fin Field-Effect Transistor iFinFETj under AC mixed NBTI and HCD stress is studied and compared with the effects of individual NBTI and HCD. In the scope of this study, degradation caused by interface traps becomes more and more dominant with the increase of individual NBTI stress. The more significant degradation observed under individual HCD stress, in comparison to individual NBTI stress at the same voltage, may primarily be attributed to an increase in interfacial traps. The AC mixed stress experiment demonstrates that the interruption of NBTI stress persistence leads to a significant reduction in the defect components within the oxide layer affected by NBTI. Even when NBTI accounts for 85% of the total degradation, the overall extent of degradation remains considerably lower than that observed with single NBTI. Consequently, in AC scenarios, interface traps emerge as the primary contributors to degradation. This finding may hold substantial implications for circuit designers. In practical AC applications, it may reduce the design margin allocated to degradation, thereby avoiding overdesign.
- 13 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of the Electron Devices Society
- Vol. 14, 70-78
Open AccessResearch on Degradation of P-FinFET Under Mixed NBTI and HCD Stress
In this paper, the stress degradation of P-channel Fin Field-Effect Transistor iFinFETj under AC mixed NBTI and HCD stress is studied and compared with the effects of individual NBTI and HCD. In the scope of this study, degradation caused by interface traps becomes more and more dominant with the increase of individual NBTI stress. The more significant degradation observed under individual HCD stress, in comparison to individual NBTI stress at the same voltage, may primarily be attributed to an increase in interfacial traps. The AC mixed stress experiment demonstrates that the interruption of NBTI stress persistence leads to a significant reduction in the defect components within the oxide layer affected by NBTI. Even when NBTI accounts for 85% of the total degradation, the overall extent of degradation remains considerably lower than that observed with single NBTI. Consequently, in AC scenarios, interface traps emerge as the primary contributors to degradation. This finding may hold substantial implications for circuit designers. In practical AC applications, it may reduce the design margin allocated to degradation, thereby avoiding overdesign.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 26 (1) , 292-300
Degradation Behaviors Comparation and Analysis of Two Typical Trench SiC MOSFETs Under High Gate Voltage Stress
This study investigates the degradation behaviors of two commercially available trench SiC MOSFETs with asymmetric trench gate and double trench gate under high gate voltage stress (both positive and negative). Experimental results reveal that the two gate structures exhibit markedly different degradation behaviors and temperature-dependent degradation responses after high gate voltage stress. Under high gate voltage stress, the double trench structure exhibits degradation behaviors analogous to conventional PBTI/NBTI phenomena, with enhanced degradation rates under negative gate voltage stress and temperature acceleration. In contrast, the asymmetric trench structure shows better reliability under equivalent stress conditions, particularly demonstrating negligible threshold voltage shift under negative bias. Temperature-dependent analysis revealed hole trapping at oxide layer dominates the asymmetric trench degradation process under positive bias, with anomalous threshold voltage reduction observed at high temperatures. Based on these findings, possible degradation mechanisms have been discussed and validated through C-V measurement. This work provides the detailed comparison of degradation behaviors between different gate structures under high gate voltage stress, offering valuable insights into the relationship between structural design and degradation mechanisms, which are critical for high-stress operational applications.
- 31 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Device and Materials Reliability
- Vol. 26 (1) , 292-300
Degradation Behaviors Comparation and Analysis of Two Typical Trench SiC MOSFETs Under High Gate Voltage Stress
This study investigates the degradation behaviors of two commercially available trench SiC MOSFETs with asymmetric trench gate and double trench gate under high gate voltage stress (both positive and negative). Experimental results reveal that the two gate structures exhibit markedly different degradation behaviors and temperature-dependent degradation responses after high gate voltage stress. Under high gate voltage stress, the double trench structure exhibits degradation behaviors analogous to conventional PBTI/NBTI phenomena, with enhanced degradation rates under negative gate voltage stress and temperature acceleration. In contrast, the asymmetric trench structure shows better reliability under equivalent stress conditions, particularly demonstrating negligible threshold voltage shift under negative bias. Temperature-dependent analysis revealed hole trapping at oxide layer dominates the asymmetric trench degradation process under positive bias, with anomalous threshold voltage reduction observed at high temperatures. Based on these findings, possible degradation mechanisms have been discussed and validated through C-V measurement. This work provides the detailed comparison of degradation behaviors between different gate structures under high gate voltage stress, offering valuable insights into the relationship between structural design and degradation mechanisms, which are critical for high-stress operational applications.