Julian Dahler
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Julian Dahler has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Sarah Staub
Processes and Materials Fraunhofer ITWM Kaiserslautern Germany
3 shared publications Lisa Scheunemann
Institute of Applied Mechanics, Faculty Civil Engineering RWTH Aachen University Aachen Germany
2 shared publications- Lisa Scheunemann
Institute of Applied Mechanics RWTH Aachen University Aachen Germany
2 shared publications Heiko Andrä
Processes and Materials Fraunhofer ITWM Kaiserslautern Germany
1 shared publicationSarah Staub
Processed and Materials Fraunhofer ITWM Kaiserslautern Germany
1 shared publication
Latest Publications
- Open Access
- 27 October 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (4)
A Coupled FE‐FFT Multiscale Framework for Heterogeneous Porous Materials Using preCICE
This work presents a coupled finite element–fast Fourier transform (FE–FFT) multiscale framework for the simulation of heterogeneous and graded porous materials. The macroscopic boundary value problem is solved with the finite element (FE) method in Julia using Ferrite.jl, while the microscopic response of periodic unit cells is obtained from fast Fourier transform (FFT)‐based homogenization based on the Lippmann–Schwinger equation. The two scales are coupled at every macroscopic Gauss point through the open‐source library preCICE together with the Micro Manager, which enable a modular, language‐agnostic exchange of strain, stress, and consistent tangent without modification of the underlying solvers. A hybrid material zone concept combines fully resolved porous regions with computationally cheap local constitutive models within a single macroscopic mesh, while a per‐Gauss‐point assignment of periodic microstructures allows graded and otherwise heterogeneous microstructures to be represented naturally. Several acceleration strategies such as finite‐difference tangents, a modified Newton scheme, and MPI‐parallel microscale execution reduce the dominant cost of the microstructure solves. The framework is validated on a graded porous aluminum specimen with three layers of increasing porosity under uniaxial compression, for which the FE–FFT model reproduces the fully resolved FFT reference stress–strain response with a maximum deviation below , demonstrating accurate predictions at substantially reduced computational cost.
- 27 October 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (4)
Open AccessA Coupled FE‐FFT Multiscale Framework for Heterogeneous Porous Materials Using preCICE
This work presents a coupled finite element–fast Fourier transform (FE–FFT) multiscale framework for the simulation of heterogeneous and graded porous materials. The macroscopic boundary value problem is solved with the finite element (FE) method in Julia using Ferrite.jl, while the microscopic response of periodic unit cells is obtained from fast Fourier transform (FFT)‐based homogenization based on the Lippmann–Schwinger equation. The two scales are coupled at every macroscopic Gauss point through the open‐source library preCICE together with the Micro Manager, which enable a modular, language‐agnostic exchange of strain, stress, and consistent tangent without modification of the underlying solvers. A hybrid material zone concept combines fully resolved porous regions with computationally cheap local constitutive models within a single macroscopic mesh, while a per‐Gauss‐point assignment of periodic microstructures allows graded and otherwise heterogeneous microstructures to be represented naturally. Several acceleration strategies such as finite‐difference tangents, a modified Newton scheme, and MPI‐parallel microscale execution reduce the dominant cost of the microstructure solves. The framework is validated on a graded porous aluminum specimen with three layers of increasing porosity under uniaxial compression, for which the FE–FFT model reproduces the fully resolved FFT reference stress–strain response with a maximum deviation below , demonstrating accurate predictions at substantially reduced computational cost.
- Open Access
- 29 September 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (4) , e70237
The Influence of Gradiations of Porous Structures Onto Their Effective Mechanical Behavior
Hybrid porous materials exploit graded pore architectures to tailor their mechanical performance. Here, FFT‐based homogenization of three‐dimensional volume elements is used to study the influence of different gradation concepts in an aluminum matrix at a fixed solid volume fraction of 80%. Three classes of microstructures are considered: (i) spherical pores with graded size and different spatial arrangements (laminate, overlap, homogeneous), (ii) spherical pores with graded porosity along the loading direction at constant pore diameter, and (iii) ellipsoidal pores with varying aspect ratios and orientations. For graded pore size, all spatial arrangements show very similar macroscopic stress–strain responses, while the local plastic strain fields differ. In contrast, graded porosity in thickness direction leads to a noticeable softening of the effective response and pronounced localization of plastic deformation in highly porous regions. For ellipsoidal pores, orientation and aspect ratio strongly affect the effective stiffness and the distribution of plastic strain, with pores aligned in loading direction yielding the stiffest and most homogeneous response. The results illustrate how pore size, porosity gradation, and pore shape can be used as design parameters for graded porous components.
- 29 September 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (4) , e70237
Open AccessThe Influence of Gradiations of Porous Structures Onto Their Effective Mechanical Behavior
Hybrid porous materials exploit graded pore architectures to tailor their mechanical performance. Here, FFT‐based homogenization of three‐dimensional volume elements is used to study the influence of different gradation concepts in an aluminum matrix at a fixed solid volume fraction of 80%. Three classes of microstructures are considered: (i) spherical pores with graded size and different spatial arrangements (laminate, overlap, homogeneous), (ii) spherical pores with graded porosity along the loading direction at constant pore diameter, and (iii) ellipsoidal pores with varying aspect ratios and orientations. For graded pore size, all spatial arrangements show very similar macroscopic stress–strain responses, while the local plastic strain fields differ. In contrast, graded porosity in thickness direction leads to a noticeable softening of the effective response and pronounced localization of plastic deformation in highly porous regions. For ellipsoidal pores, orientation and aspect ratio strongly affect the effective stiffness and the distribution of plastic strain, with pores aligned in loading direction yielding the stiffest and most homogeneous response. The results illustrate how pore size, porosity gradation, and pore shape can be used as design parameters for graded porous components.
- Open Access
- 10 July 2026
- Published by Wiley in GAMM-Mitteilungen
- Vol. 49 (3)
Microscale FFT‐based modeling of artificial porous microstructures and analysis of macroscopic models under varying loading scenarios
This article investigates the modeling of metallic isotropic porous materials by evaluating and comparing macroscopic and microstructure‐resolved simulation approaches. At the macroscopic level, different variants of the Deshpande‐Fleck (DF) model are implemented to describe the elastoplastic behavior of metallic porous materials. Considering the porous microstructure explicitly, FFT‐based simulations are performed to compute homogenized responses of synthetically generated microstructures under various loading conditions. Assessing representativeness and morphological variation, different realizations of artificial closed‐cell porous microstructures with different relative densities are analyzed. The study systematically compares macroscopic DF model predictions with the results of FFT‐based homogenization to assess DF model accuracy and identify limitations in different loading scenarios in a wide range of porosities. The results demonstrate that the original DF model captures key trends in the mechanical response, but needs repeated calibration for varied load paths. Using modified DF models, the identification of varying ellipticity based on uniaxial and hydrostatic compression simulations enables a good representation of multiaxial compression loading. The FFT‐based simulations highlight the strong influence of morphological properties, emphasizing the universality of microstructure‐based models without the need for recalibration for different loading scenarios, but leading to increased computational effort. The findings provide valuable insights into the capabilities and limitations of the different DF models over a wide range of porosities and demonstrate the universality of microstructure‐resolved simulations for reliable prediction of porous material behavior under varying loading conditions.
- 10 July 2026
- Published by Wiley in GAMM-Mitteilungen
- Vol. 49 (3)
Open AccessMicroscale FFT‐based modeling of artificial porous microstructures and analysis of macroscopic models under varying loading scenarios
This article investigates the modeling of metallic isotropic porous materials by evaluating and comparing macroscopic and microstructure‐resolved simulation approaches. At the macroscopic level, different variants of the Deshpande‐Fleck (DF) model are implemented to describe the elastoplastic behavior of metallic porous materials. Considering the porous microstructure explicitly, FFT‐based simulations are performed to compute homogenized responses of synthetically generated microstructures under various loading conditions. Assessing representativeness and morphological variation, different realizations of artificial closed‐cell porous microstructures with different relative densities are analyzed. The study systematically compares macroscopic DF model predictions with the results of FFT‐based homogenization to assess DF model accuracy and identify limitations in different loading scenarios in a wide range of porosities. The results demonstrate that the original DF model captures key trends in the mechanical response, but needs repeated calibration for varied load paths. Using modified DF models, the identification of varying ellipticity based on uniaxial and hydrostatic compression simulations enables a good representation of multiaxial compression loading. The FFT‐based simulations highlight the strong influence of morphological properties, emphasizing the universality of microstructure‐based models without the need for recalibration for different loading scenarios, but leading to increased computational effort. The findings provide valuable insights into the capabilities and limitations of the different DF models over a wide range of porosities and demonstrate the universality of microstructure‐resolved simulations for reliable prediction of porous material behavior under varying loading conditions.
- Open Access
- 14 January 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (1)
Comparison of Analytical and FFT‐Based Predictions of Effective Stiffness in Isotropic and Anisotropic Closed‐Cell Materials
This work investigates the elastic behavior of isotropic and anisotropic closed‐cell porous materials using analytical and Fast‐Fourier‐Transform (FFT)‐based numerical approaches. The study focuses on understanding how microstructural features, such as pore shape, orientation, and solid volume fraction, influence the macroscopic stiffness of the material. Analytical expressions based on extended Gibson–Ashby‐type models are used to predict the directional effective stiffness under varying anisotropy ratios and porosities. These predictions are compared with results obtained from FFT‐based homogenization of 3D microstructures. The analysis highlights significant deviations between analytical and numerical results in highly anisotropic or low‐density regimes, with the analytical models often overestimating the stiffness. The findings underline the limitations of classical analytical formulations for complex microstructures and demonstrate the accuracy and efficiency of FFT‐based homogenization in capturing anisotropy‐induced mechanical effects.
- 14 January 2026
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 26 (1)
Open AccessComparison of Analytical and FFT‐Based Predictions of Effective Stiffness in Isotropic and Anisotropic Closed‐Cell Materials
This work investigates the elastic behavior of isotropic and anisotropic closed‐cell porous materials using analytical and Fast‐Fourier‐Transform (FFT)‐based numerical approaches. The study focuses on understanding how microstructural features, such as pore shape, orientation, and solid volume fraction, influence the macroscopic stiffness of the material. Analytical expressions based on extended Gibson–Ashby‐type models are used to predict the directional effective stiffness under varying anisotropy ratios and porosities. These predictions are compared with results obtained from FFT‐based homogenization of 3D microstructures. The analysis highlights significant deviations between analytical and numerical results in highly anisotropic or low‐density regimes, with the analytical models often overestimating the stiffness. The findings underline the limitations of classical analytical formulations for complex microstructures and demonstrate the accuracy and efficiency of FFT‐based homogenization in capturing anisotropy‐induced mechanical effects.