Jae-Kark Choi
Jae-Kark Choi has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Jakub J. Moskal
VIStology, Inc
2 shared publications - Jeung Won Choi
Agency for Defense Development, Daejeon 34186, Korea
2 shared publications - Mieczyslaw M. Kokar
Department of Electrical and Computer Engineering, Northeastern University, Boston, MA 02115, USA
2 shared publications - Byeong-Gil Yu
Satellite Payload Team 3, Hanwha Systems, 27 Hwangsaeul-ro 360beon-gil, Bundang-gu, Seongnam-si 13591, Republic of Korea
1 shared publication - Byeongjae Kim
The 1st Research and Development Institute, Agency for Defense Development, Daejeon-si 34186, Republic of Korea
1 shared publication - Camillo Gentile
Wireless Networks Division, National Institute of Standards and Technology, Gaithersburg, MD, USA
1 shared publication
Latest Publications
- Open Access
A Systematic Qualification of a Planar-Type Phased Array Antenna with Cavity-Backed Slot Radiators for Communication Satellites Under Launch and On-Orbit Conditions
This paper presents a systematic qualification process for an electronic beam-steering antenna assembly for a low-Earth orbit (LEO) communication satellite. The transmitting/receiving antenna for the LEO communication satellite is based on a cavity-backed slot radiator, which has improved radiation efficiency and low mutual coupling compared to conventional PCB patch structures. In order to verify the electrical performance and reliability of the manual soldering process in a tightly spaced array structure with narrow element spacing and densely connected multi-channel RF modules, a reduced model was designed and fabricated and qualification tests were conducted under launch and on-orbit environments. The integration equipment was developed to ensure precise mechanical alignment and integration/disassembly between the radiating element arrays of the transmitting and receiving antenna modules and the RF modules, thereby establishing a manufacturability strategy for the antenna module and RF integrated module, which comprise a large array structure. Finally, the qualification tests of the transmitting and receiving antenna were performed to evaluate the structural and thermal stability considering the launch and orbital environments. The systematic qualification process proposed in this paper can be used in the development of the antenna system of the communication satellite.
Open AccessA Systematic Qualification of a Planar-Type Phased Array Antenna with Cavity-Backed Slot Radiators for Communication Satellites Under Launch and On-Orbit Conditions
This paper presents a systematic qualification process for an electronic beam-steering antenna assembly for a low-Earth orbit (LEO) communication satellite. The transmitting/receiving antenna for the LEO communication satellite is based on a cavity-backed slot radiator, which has improved radiation efficiency and low mutual coupling compared to conventional PCB patch structures. In order to verify the electrical performance and reliability of the manual soldering process in a tightly spaced array structure with narrow element spacing and densely connected multi-channel RF modules, a reduced model was designed and fabricated and qualification tests were conducted under launch and on-orbit environments. The integration equipment was developed to ensure precise mechanical alignment and integration/disassembly between the radiating element arrays of the transmitting and receiving antenna modules and the RF modules, thereby establishing a manufacturability strategy for the antenna module and RF integrated module, which comprise a large array structure. Finally, the qualification tests of the transmitting and receiving antenna were performed to evaluate the structural and thermal stability considering the launch and orbital environments. The systematic qualification process proposed in this paper can be used in the development of the antenna system of the communication satellite.
- Open Access
- 31 December 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (12) , 1196-1202
MTL-based Joint DoA Estimation and AMC of Unknown Overlapped Signal
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 31 December 2025
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 36 (12) , 1196-1202
Open AccessMTL-based Joint DoA Estimation and AMC of Unknown Overlapped Signal
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- Open Access
- 30 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (15) , 7056
Towards Collaborative and Dynamic Spectrum Sharing via Interpretation of Spectrum Access Policies
This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum-sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and that the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software-defined radios.
- 30 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (15) , 7056
Open AccessTowards Collaborative and Dynamic Spectrum Sharing via Interpretation of Spectrum Access Policies
This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum-sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and that the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software-defined radios.
- Open Access
- 21 June 2021
- Published by MDPI AG in Preprints.org
Towards Collaborative and Dynamic Spectrum Sharing via Interpretation of Spectrum Access Policies
This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software defined radios.
- 21 June 2021
- Published by MDPI AG in Preprints.org
Open AccessTowards Collaborative and Dynamic Spectrum Sharing via Interpretation of Spectrum Access Policies
This paper describes some of the challenges that need to be addressed in order to develop collaborative spectrum sharing systems. The importance of these challenges stems from the assumption that rules for spectrum sharing can change after the deployment of radio networks and the whole system must be able to adapt to them. To address such a requirement, we used a policy-based approach in which transmissions are controlled by a policy interpreter system, and the policies can be modified during system operation. Our primary goal was to develop a prototype of such a system. In this paper, we outline the implementation of policy interpretation, automatic generation of transmission opportunities in case a request for transmission is denied by the policy reasoner, and the generation of rendezvous channels for the synchronization of otherwise asynchronously running software defined radios.
- 3 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (12) , 6562-6573
Analysis of E-Band Path Loss and Propagation Mechanisms in the Indoor Environment
Millimeter-wave transceivers will feature massive phased-array antennas whose pencilbeams can be steered toward the angle of arrival of the propagation path having the maximum power, exploiting their high gain to compensate for the greater path loss witnessed in the upper spectrum. For this reason, maximum-power path-loss models, in contrast to conventional ones based on the integrated power from an omnidirectional antenna, may be more relevant. Yet to our knowledge, they do not appear in the literature save for one reference. In this paper, we compare both model types at 83.5 GHz for four indoor environments typical of hotspot deployments in line-of-sight (LOS) and non-LOS conditions up to a range of 160 m. To fit the models, we conducted a measurement campaign with over 3000 different transmitter-receiver configurations using a custom-designed channel sounder capable of extracting the delay and 3-D angle of arrival of the received paths with super-resolution. The models are supported by a detailed analysis of the propagation mechanisms of direct transmission, reflection, and knife-edge diffraction to shed light on their interplay in the E-band regime.
- 3 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 65 (12) , 6562-6573
Analysis of E-Band Path Loss and Propagation Mechanisms in the Indoor Environment
Millimeter-wave transceivers will feature massive phased-array antennas whose pencilbeams can be steered toward the angle of arrival of the propagation path having the maximum power, exploiting their high gain to compensate for the greater path loss witnessed in the upper spectrum. For this reason, maximum-power path-loss models, in contrast to conventional ones based on the integrated power from an omnidirectional antenna, may be more relevant. Yet to our knowledge, they do not appear in the literature save for one reference. In this paper, we compare both model types at 83.5 GHz for four indoor environments typical of hotspot deployments in line-of-sight (LOS) and non-LOS conditions up to a range of 160 m. To fit the models, we conducted a measurement campaign with over 3000 different transmitter-receiver configurations using a custom-designed channel sounder capable of extracting the delay and 3-D angle of arrival of the received paths with super-resolution. The models are supported by a detailed analysis of the propagation mechanisms of direct transmission, reflection, and knife-edge diffraction to shed light on their interplay in the E-band regime.