Falko Bethmann
Research Subjects
Falko Bethmann has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
Peter Meier
4 shared publicationsAlba Zappone
Institute of Geophysical, Department of Earth Sciences, ETH Zürich, Zurich, Switzerland
3 shared publicationsAndres Alcolea
3 shared publications- Anne Obermann
Swiss Seismological Service ETH Zurich Zurich Switzerland
3 shared publications - Antonio Pio Rinaldi
Swiss Seismological Service, ETH Zurich, Zurich, Switzerland
3 shared publications Dimitrios Karvounis
3 shared publications
Latest Publications
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Seismic Risk Mitigation for Geothermal Projects in Densely Populated Areas: Lessons from the Haute-Sorne Pilot Project
As the global energy transition accelerates, Geothermal Systems are increasingly recognized for their potential to provide baseload renewable power and heat. However, the deployment of geothermal projects near urban centers faces significant challenges related to induced seismicity, as evidenced by discontinued projects in Basel and St. Gallen. This presentation details the comprehensive seismic risk mitigation strategy developed for the Haute-Sorne EGS pilot project in Switzerland and discusses its critical relevance for future geothermal deployment in densely populated settings.The Haute-Sorne project employs a multi-faceted approach to risk management that surpasses the current state of the art. Central to this strategy is a shift from single, large-scale stimulations to a multi-stage stimulation concept. By dividing the reservoir into smaller, engineered segments, the project aims to limit the maximum magnitude of induced events, a crucial prerequisite for operating in urban environments where tolerance for felt vibrations is minimal.To further ensure safety in sensitive locations, the project integrates Adaptive Traffic Light Systems (ATLS). Unlike conventional reactive systems, ATLS utilizes real-time data and earthquake forecasting to predict the evolution of seismicity based on planned injection schedules. This proactive capability allows operators to adjust or halt operations before adverse events occur, providing the high level of operational control necessary for city-based projects.Finally, addressing social acceptance in populated areas requires transparent risk communication. We present results from a probabilistic risk assessment comparing the geothermal project's risk profile to accepted community risks, such as fire. This comparison demonstrates that with rigorous mitigation, EGS risks can be managed to levels comparable to everyday urban hazards. These lessons from Haute-Sorne provide a vital blueprint for the safe, socially acceptable integration of geothermal energy into the urban landscape.
- 13 March 2026
- Published by Copernicus GmbH
Open AccessSeismic Risk Mitigation for Geothermal Projects in Densely Populated Areas: Lessons from the Haute-Sorne Pilot Project
As the global energy transition accelerates, Geothermal Systems are increasingly recognized for their potential to provide baseload renewable power and heat. However, the deployment of geothermal projects near urban centers faces significant challenges related to induced seismicity, as evidenced by discontinued projects in Basel and St. Gallen. This presentation details the comprehensive seismic risk mitigation strategy developed for the Haute-Sorne EGS pilot project in Switzerland and discusses its critical relevance for future geothermal deployment in densely populated settings.The Haute-Sorne project employs a multi-faceted approach to risk management that surpasses the current state of the art. Central to this strategy is a shift from single, large-scale stimulations to a multi-stage stimulation concept. By dividing the reservoir into smaller, engineered segments, the project aims to limit the maximum magnitude of induced events, a crucial prerequisite for operating in urban environments where tolerance for felt vibrations is minimal.To further ensure safety in sensitive locations, the project integrates Adaptive Traffic Light Systems (ATLS). Unlike conventional reactive systems, ATLS utilizes real-time data and earthquake forecasting to predict the evolution of seismicity based on planned injection schedules. This proactive capability allows operators to adjust or halt operations before adverse events occur, providing the high level of operational control necessary for city-based projects.Finally, addressing social acceptance in populated areas requires transparent risk communication. We present results from a probabilistic risk assessment comparing the geothermal project's risk profile to accepted community risks, such as fire. This comparison demonstrates that with rigorous mitigation, EGS risks can be managed to levels comparable to everyday urban hazards. These lessons from Haute-Sorne provide a vital blueprint for the safe, socially acceptable integration of geothermal energy into the urban landscape.
- Open Access
- 27 October 2025
- Published by Copernicus GmbH in Solid Earth
- Vol. 16 (10) , 1153-1180
Updating induced seismic hazard assessments during hydraulic stimulation experiments in underground laboratories: workflow and limitations
Advancing technologies to harvest deep geothermal energy has seen backlash related to unacceptable levels of induced seismic hazard during hydraulic stimulations. A thorough analysis of induced seismic hazard before these operations has recently become standard practice in the last decade. Additionally, more process understanding of the underlying causes of induced seismicity as well as novel approaches to develop geomechanical reservoirs are being explored in controlled underground laboratory experiments worldwide. Here, we present a probabilistic analysis of the seismic hazard induced by the ongoing hectometre-scale stimulation experiments at the Bedretto Underground Laboratory for Geoenergies and Geosciences (BULGG). Our workflow allows for fast updates of the hazard computation as soon as new site-specific information on the seismogenic response (expressed primarily by the feedback a fb value and the Gutenberg–Richter b value) and ground motion models (GMMs) become available. We present a sequence of hazard analyses corresponding to different project stages at the BULGG. These reveal the large uncertainty in a priori hazard estimations that only reduces once site-specific GMMs and information on the seismic response of specific stimulation stages are considered. The sources of uncertainty are (1) the large variability in the seismogenic response recorded across all stimulation case studies and (2) uncertain GMMs on the underground laboratory scale. One implication for large-scale hydraulic stimulations is that hazard computation must be updated at different project stages. Additionally, stimulations have to be closely accompanied by a mitigation scheme, ideally in the form of an adaptive traffic light system (ATLS), which reassesses seismic hazard in near-real time. Our study also shows that the observed seismogenic responses in underground laboratories differ from large-scale stimulations at greater depth in that the seismogenic response is substantially more variable and tends to be weaker. Reasons may be lower stress levels, but also smaller injected volumes accessing a more limited fracture network than large-scale stimulations. Controlled underground laboratory experiments can contribute to improving our understanding of the the physical reasons leading to such variable seismogenic responses. The presented analysis implied that such experiments may be limited in terms of upscaling but are likely to be safe in terms of induced seismic hazard.
- 27 October 2025
- Published by Copernicus GmbH in Solid Earth
- Vol. 16 (10) , 1153-1180
Open AccessUpdating induced seismic hazard assessments during hydraulic stimulation experiments in underground laboratories: workflow and limitations
Advancing technologies to harvest deep geothermal energy has seen backlash related to unacceptable levels of induced seismic hazard during hydraulic stimulations. A thorough analysis of induced seismic hazard before these operations has recently become standard practice in the last decade. Additionally, more process understanding of the underlying causes of induced seismicity as well as novel approaches to develop geomechanical reservoirs are being explored in controlled underground laboratory experiments worldwide. Here, we present a probabilistic analysis of the seismic hazard induced by the ongoing hectometre-scale stimulation experiments at the Bedretto Underground Laboratory for Geoenergies and Geosciences (BULGG). Our workflow allows for fast updates of the hazard computation as soon as new site-specific information on the seismogenic response (expressed primarily by the feedback a fb value and the Gutenberg–Richter b value) and ground motion models (GMMs) become available. We present a sequence of hazard analyses corresponding to different project stages at the BULGG. These reveal the large uncertainty in a priori hazard estimations that only reduces once site-specific GMMs and information on the seismic response of specific stimulation stages are considered. The sources of uncertainty are (1) the large variability in the seismogenic response recorded across all stimulation case studies and (2) uncertain GMMs on the underground laboratory scale. One implication for large-scale hydraulic stimulations is that hazard computation must be updated at different project stages. Additionally, stimulations have to be closely accompanied by a mitigation scheme, ideally in the form of an adaptive traffic light system (ATLS), which reassesses seismic hazard in near-real time. Our study also shows that the observed seismogenic responses in underground laboratories differ from large-scale stimulations at greater depth in that the seismogenic response is substantially more variable and tends to be weaker. Reasons may be lower stress levels, but also smaller injected volumes accessing a more limited fracture network than large-scale stimulations. Controlled underground laboratory experiments can contribute to improving our understanding of the the physical reasons leading to such variable seismogenic responses. The presented analysis implied that such experiments may be limited in terms of upscaling but are likely to be safe in terms of induced seismic hazard.
- Open Access
- 27 January 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-40
Updating induced seismic hazard assessments during hydraulic stimulation experiments in underground laboratories: workflow and limitations
Advancing technologies to harvest deep geothermal energy has seen backlashes related to unacceptable levels of induced seismic hazard during hydraulic stimulations. A thorough analysis of induced seismic hazard before these operations has recently become standard practice in the last decade. Additionally, more process understanding of the underlying causes of induced seismicity as well as novel approaches to develop geomechanical reservoirs are being explored in controlled underground laboratory experiments world-wide. Here, we present a probabilistic analysis of the seismic hazard induced by the ongoing hectometer scale stimulation experiments at the Bedretto Underground Laboratory for Geoenergies and Geosciences (BULGG). Our workflow allows for fast updates of the hazard computation as soon as new site-specific information on the seismogenic response (expressed primarily by the feedback afb-value and the Gutenberg Richter b-value) and ground motion models (GMM) become available. We present a sequence of hazard analyses corresponding to different project stages at the BULGG. These reveal the large uncertainty in a priori hazard estimations that only reduce once site-specific GMMs and information on the seismic response of specific stimulation stages are considered. The sources of uncertainty are 1) the large variability in the seismogenic response recorded across all stimulation case studies, as well as 2) uncertain GMMs on the underground laboratory scale. One implication for large-scale hydraulic stimulations is that hazard computation must be updated at different project stages. Additionally, stimulations have to be closely accompanied by a mitigation scheme, ideally in the form of an adaptive traffic light system (ATLS), which reassesses seismic hazard in near-real-time. Our study also shows that the observed seismogenic responses in underground laboratories differ from large-scale stimulations at greater depth in that the seismogenic response is substantially more variable and tends to be weaker. Reasons may be lower stress levels, but also smaller injected volumes accessing a more limited fracture network than large-scale stimulations. Exploring the physical reasons leading to the weaker seismogenic response may reveal ways for safer exploitation of geoenergy resources. Controlled underground laboratory experiments can readily contribute to this, and – as shown in the presented analysis – are likely to be safe in terms of induced seismic hazard.
- 27 January 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-40
Open AccessUpdating induced seismic hazard assessments during hydraulic stimulation experiments in underground laboratories: workflow and limitations
Advancing technologies to harvest deep geothermal energy has seen backlashes related to unacceptable levels of induced seismic hazard during hydraulic stimulations. A thorough analysis of induced seismic hazard before these operations has recently become standard practice in the last decade. Additionally, more process understanding of the underlying causes of induced seismicity as well as novel approaches to develop geomechanical reservoirs are being explored in controlled underground laboratory experiments world-wide. Here, we present a probabilistic analysis of the seismic hazard induced by the ongoing hectometer scale stimulation experiments at the Bedretto Underground Laboratory for Geoenergies and Geosciences (BULGG). Our workflow allows for fast updates of the hazard computation as soon as new site-specific information on the seismogenic response (expressed primarily by the feedback afb-value and the Gutenberg Richter b-value) and ground motion models (GMM) become available. We present a sequence of hazard analyses corresponding to different project stages at the BULGG. These reveal the large uncertainty in a priori hazard estimations that only reduce once site-specific GMMs and information on the seismic response of specific stimulation stages are considered. The sources of uncertainty are 1) the large variability in the seismogenic response recorded across all stimulation case studies, as well as 2) uncertain GMMs on the underground laboratory scale. One implication for large-scale hydraulic stimulations is that hazard computation must be updated at different project stages. Additionally, stimulations have to be closely accompanied by a mitigation scheme, ideally in the form of an adaptive traffic light system (ATLS), which reassesses seismic hazard in near-real-time. Our study also shows that the observed seismogenic responses in underground laboratories differ from large-scale stimulations at greater depth in that the seismogenic response is substantially more variable and tends to be weaker. Reasons may be lower stress levels, but also smaller injected volumes accessing a more limited fracture network than large-scale stimulations. Exploring the physical reasons leading to the weaker seismogenic response may reveal ways for safer exploitation of geoenergy resources. Controlled underground laboratory experiments can readily contribute to this, and – as shown in the presented analysis – are likely to be safe in terms of induced seismic hazard.
- Open Access
- 2 February 2022
- Published by Copernicus GmbH in Solid Earth
- Vol. 13 (2) , 301-322
Multi-disciplinary characterizations of the BedrettoLab – a new underground geoscience research facility
The increased interest in subsurface development (e.g., unconventional hydrocarbon, engineered geothermal systems (EGSs), waste disposal) and the associated (triggered or induced) seismicity calls for a better understanding of the hydro-seismo-mechanical coupling in fractured rock masses. Being able to bridge the knowledge gap between laboratory and reservoir scales, controllable meso-scale in situ experiments are deemed indispensable. In an effort to access and instrument rock masses of hectometer size, the Bedretto Underground Laboratory for Geosciences and Geoenergies (“BedrettoLab”) was established in 2018 in the existing Bedretto Tunnel (Ticino, Switzerland), with an average overburden of 1000 m. In this paper, we introduce the BedrettoLab, its general setting and current status. Combined geological, geomechanical and geophysical methods were employed in a hectometer-scale rock mass explored by several boreholes to characterize the in situ conditions and internal structures of the rock volume. The rock volume features three distinct units, with the middle fault zone sandwiched by two relatively intact units. The middle fault zone unit appears to be a representative feature of the site, as similar structures repeat every several hundreds of meters along the tunnel. The lithological variations across the characterization boreholes manifest the complexity and heterogeneity of the rock volume and are accompanied by compartmentalized hydrostructures and significant stress rotations. With this complexity, the characterized rock volume is considered characteristic of the heterogeneity that is typically encountered in subsurface exploration and development. The BedrettoLab can adequately serve as a test-bed that allows for in-depth study of the hydro-seismo-mechanical response of fractured crystalline rock masses.
- 2 February 2022
- Published by Copernicus GmbH in Solid Earth
- Vol. 13 (2) , 301-322
Open AccessMulti-disciplinary characterizations of the BedrettoLab – a new underground geoscience research facility
The increased interest in subsurface development (e.g., unconventional hydrocarbon, engineered geothermal systems (EGSs), waste disposal) and the associated (triggered or induced) seismicity calls for a better understanding of the hydro-seismo-mechanical coupling in fractured rock masses. Being able to bridge the knowledge gap between laboratory and reservoir scales, controllable meso-scale in situ experiments are deemed indispensable. In an effort to access and instrument rock masses of hectometer size, the Bedretto Underground Laboratory for Geosciences and Geoenergies (“BedrettoLab”) was established in 2018 in the existing Bedretto Tunnel (Ticino, Switzerland), with an average overburden of 1000 m. In this paper, we introduce the BedrettoLab, its general setting and current status. Combined geological, geomechanical and geophysical methods were employed in a hectometer-scale rock mass explored by several boreholes to characterize the in situ conditions and internal structures of the rock volume. The rock volume features three distinct units, with the middle fault zone sandwiched by two relatively intact units. The middle fault zone unit appears to be a representative feature of the site, as similar structures repeat every several hundreds of meters along the tunnel. The lithological variations across the characterization boreholes manifest the complexity and heterogeneity of the rock volume and are accompanied by compartmentalized hydrostructures and significant stress rotations. With this complexity, the characterized rock volume is considered characteristic of the heterogeneity that is typically encountered in subsurface exploration and development. The BedrettoLab can adequately serve as a test-bed that allows for in-depth study of the hydro-seismo-mechanical response of fractured crystalline rock masses.