Zhouhong Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhouhong Wang has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Lifang Zeng
School of Aeronautics and Astronautics, Zhejiang University, Hangzhou 310027, China
3 shared publications - Haifeng Yue
Zhejiang Key Laboratory of Intelligent High Speed UAV Technology, Zhejiang University 1 , Hangzhou 310027
2 shared publications Jun Li
Zhejiang Key Laboratory of Intelligent High Speed UAV Technology, Zhejiang University 1 , Hangzhou 310027
2 shared publications- Siyuan Zheng
Zhejiang University, Hangzhou, 310027, China
2 shared publications - Dingyi Pan
State Key Laboratory of Fluid Power and Mechatronic Systems and Department of Engineering Mechanics , Zhejiang University , Hangzhou 310027 , China
1 shared publication - Huan Luo
Zhejiang University, Hangzhou, 310027, China
1 shared publication
Latest Publications
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Optimization and backpressure mechanisms of a ramjet flowpath in an over/under turbine-based combined cycle inlet
Two-dimensional variable-geometry inlets are key to wide-envelope operation of over/under turbine-based combined-cycle engines, but their ramjet flowpaths must balance aerodynamic compression, installation constraints, and flow regulation during mode transition. For a single fixed ramjet-flowpath geometry operating over Ma∞=3.5–7.0, an aerodynamic-prior-guided gated deep neural network (AP-GDN) is coupled with differential evolution to perform weighted multi-condition optimization, followed by a low-Mach-number backpressure analysis. AP-GDN combines freestream-condition gating with a total-pressure-recovery-to-throat-Mach-number cascade to capture cross-condition nonlinearities; R2 is at least 0.985 for all five test-set outputs. With the adjustment-preference coefficient α=0.10, the selected configuration increases the multi-condition aerodynamic-performance component and the composite objective by 5.0% and 11.7%, respectively, relative to the baseline. At Ma∞=7.0, it achieves φ=0.939, raises PRth by 10%, and increases δ2 from 5.39° to 7.60°. Quasi-steady backpressure loading shows that upstream motion is controlled jointly by an asymmetric X-type shock train and separation-induced blockage along the lower wall; the critical backpressure ratios are ∼18 and 24 at Ma∞=3.5 and 4.0, respectively. The framework quantitatively reconciles wide-range aerodynamic performance, second-ramp adjustment requirements, and low-Mach-number backpressure tolerance under a prescribed mission preference.
- 1 September 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (9)
Optimization and backpressure mechanisms of a ramjet flowpath in an over/under turbine-based combined cycle inlet
Two-dimensional variable-geometry inlets are key to wide-envelope operation of over/under turbine-based combined-cycle engines, but their ramjet flowpaths must balance aerodynamic compression, installation constraints, and flow regulation during mode transition. For a single fixed ramjet-flowpath geometry operating over Ma∞=3.5–7.0, an aerodynamic-prior-guided gated deep neural network (AP-GDN) is coupled with differential evolution to perform weighted multi-condition optimization, followed by a low-Mach-number backpressure analysis. AP-GDN combines freestream-condition gating with a total-pressure-recovery-to-throat-Mach-number cascade to capture cross-condition nonlinearities; R2 is at least 0.985 for all five test-set outputs. With the adjustment-preference coefficient α=0.10, the selected configuration increases the multi-condition aerodynamic-performance component and the composite objective by 5.0% and 11.7%, respectively, relative to the baseline. At Ma∞=7.0, it achieves φ=0.939, raises PRth by 10%, and increases δ2 from 5.39° to 7.60°. Quasi-steady backpressure loading shows that upstream motion is controlled jointly by an asymmetric X-type shock train and separation-induced blockage along the lower wall; the critical backpressure ratios are ∼18 and 24 at Ma∞=3.5 and 4.0, respectively. The framework quantitatively reconciles wide-range aerodynamic performance, second-ramp adjustment requirements, and low-Mach-number backpressure tolerance under a prescribed mission preference.
- Open Access
- 3 March 2026
- Published by IOS Press
- p. 206-213
Investigation on the Muzzle Flow-Field Characteristics Based on Numerical Simulation Method
In modern warfare, combat platforms such as fighter jets are affected by shock waves. Flow-field characteristics are crucial for the performance and reliability of these platforms. This study employs a fluid simulation method to investigate the effects of sensitive parameters and the distance between the bulkhead and the gun barrel on the flow field of an aircraft gun. Simulations are conducted under various conditions: a baseline working condition, a condition featuring a 20% deviation of the initial condition, and a condition with an increased distance between the bulkhead and the gun barre. Numerical calculations are performed using the AUSM+ scheme, the Venkatakrishnan-improved limiter, and the Menter k – ω SST turbulence model. The numerical method and computational model are verified through previous shock-tube and projectile flight experiments. The results demonstrate that reducing the initial conditions stabilizes the flow field. Increasing the distance between the bulkhead and the gun barrel influences the diffusion of the flow field and pressure distribution. These findings provide valuable insights for optimizing the flow field of aircraft guns and contribute to improving the performance and reliability of gun systems in various applications and conditions.
- 3 March 2026
- Published by IOS Press
- p. 206-213
Open AccessInvestigation on the Muzzle Flow-Field Characteristics Based on Numerical Simulation Method
In modern warfare, combat platforms such as fighter jets are affected by shock waves. Flow-field characteristics are crucial for the performance and reliability of these platforms. This study employs a fluid simulation method to investigate the effects of sensitive parameters and the distance between the bulkhead and the gun barrel on the flow field of an aircraft gun. Simulations are conducted under various conditions: a baseline working condition, a condition featuring a 20% deviation of the initial condition, and a condition with an increased distance between the bulkhead and the gun barre. Numerical calculations are performed using the AUSM+ scheme, the Venkatakrishnan-improved limiter, and the Menter k – ω SST turbulence model. The numerical method and computational model are verified through previous shock-tube and projectile flight experiments. The results demonstrate that reducing the initial conditions stabilizes the flow field. Increasing the distance between the bulkhead and the gun barrel influences the diffusion of the flow field and pressure distribution. These findings provide valuable insights for optimizing the flow field of aircraft guns and contribute to improving the performance and reliability of gun systems in various applications and conditions.