Xiao-Chen Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiao-Chen Wang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Quan Yang
University of Science and Technology Beijing
3 shared publications- Jia-Qi Chen
University of Science and Technology Beijing
2 shared publications - Jin-Bo Zhou
University of Science and Technology Beijing
2 shared publications Jing-Dong Li
University of Science and Technology Beijing
2 shared publicationsDan Chen
National Engineering Technology Research Center of Flat Rolling Equipment University of Science and Technology Beijing Beijing 102206 China
1 shared publication- Feifei Li1 shared publication
Latest Publications
- 7 July 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
Interpretable machine learning for high-precision wall thickness prediction of hot-rolled seamless steel tubes
To improve the accuracy of axial wall thickness prediction and reduce reliance on manual measurements in hot-rolled steel tube production, a prediction method based on particle swarm optimisation (PSO) and a one-dimensional convolutional neural network (1D-CNN) was developed. A dataset was constructed from 131 industrial samples collected from the production line. An input variable set was established to characterise entry wall thickness, geometric and overall deformation indicators, pass schedule profile features, speed schedule profile and thermal conditions. PSO was then employed to optimise the key hyperparameters of the 1D-CNN. The proposed model was compared with several machine learning models. The results showed that the PSO-1D-CNN model achieved the best predictive performance, with a test root mean square error of 0.0281, a mean absolute error of 0.0217, and a coefficient of determination R 2 of 0.913. Further interpretability analysis using SHapley Additive exPlanations revealed that the centroid of the reduction distribution, the number of stands, the diameter-to-wall ratio, the tube temperature at the sizing exit, and the radial compression ratio were the most influential variables affecting the predictions. Finally, the proposed model was integrated into an online system. This system enables single tube wall thickness prediction, sawing parameter calculation, and batch visualisation for process adjustment and sawing decisions.
- 7 July 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
Interpretable machine learning for high-precision wall thickness prediction of hot-rolled seamless steel tubes
To improve the accuracy of axial wall thickness prediction and reduce reliance on manual measurements in hot-rolled steel tube production, a prediction method based on particle swarm optimisation (PSO) and a one-dimensional convolutional neural network (1D-CNN) was developed. A dataset was constructed from 131 industrial samples collected from the production line. An input variable set was established to characterise entry wall thickness, geometric and overall deformation indicators, pass schedule profile features, speed schedule profile and thermal conditions. PSO was then employed to optimise the key hyperparameters of the 1D-CNN. The proposed model was compared with several machine learning models. The results showed that the PSO-1D-CNN model achieved the best predictive performance, with a test root mean square error of 0.0281, a mean absolute error of 0.0217, and a coefficient of determination R 2 of 0.913. Further interpretability analysis using SHapley Additive exPlanations revealed that the centroid of the reduction distribution, the number of stands, the diameter-to-wall ratio, the tube temperature at the sizing exit, and the radial compression ratio were the most influential variables affecting the predictions. Finally, the proposed model was integrated into an online system. This system enables single tube wall thickness prediction, sawing parameter calculation, and batch visualisation for process adjustment and sawing decisions.
- Open Access
- 1 June 2026
- Published by Elsevier in SSRN Electronic Journal
Research on monocular and binocular calibration methods for line-scan cameras based on a viewing-plane coordinate system and a virtual 3-D target
Traditional calibration methods for line-scan cameras often impose stringent requirements on the displacement accuracy and manufacturing precision of calibration targets. Line-scan cameras are increasingly used in demanding industrial applications, such as high-speed inline measurement and surface defect inspection, because of their high scanning frequency, continuous imaging capability, and high transmission efficiency. Furthermore, the research on binocular stereocalibration methodologies for line-scan cameras remains relatively limited and operationally complex. In particular, there is still a lack of in-depth theoretical research on viewing-plane coincidence adjustment, which fundamentally restricts the spatial detection accuracy of binocular line-scan systems. To address these challenges, this paper proposes a novel static calibration method for monocular line-scan cameras by introducing a viewing-plane coordinate system into a traditional imaging model. This approach uses a simply designed 2-D calibration target and eliminates the need for complex patterns or precise target translation. Building on this monocular framework, we developed a comprehensive binocular line-scan camera imaging model. A key contribution of this study is the introduction of a viewing-plane coincidence correction model that effectively mitigates the potential parallax issues in binocular systems. Subsequently, a virtual 3-D target-based calibration method for binocular line-scan cameras was proposed to facilitate highly accurate spatial detection. Experimental validation demonstrated the high precision and robustness of the proposed approach. The monocular calibration achieves a root mean square reprojection error of 0.26 pixels, while the binocular system attains a spatial detection accuracy of 0.12 mm. These results confirm the efficacy and potential of the proposed methods for high-precision machine-vision applications.
- 1 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessResearch on monocular and binocular calibration methods for line-scan cameras based on a viewing-plane coordinate system and a virtual 3-D target
Traditional calibration methods for line-scan cameras often impose stringent requirements on the displacement accuracy and manufacturing precision of calibration targets. Line-scan cameras are increasingly used in demanding industrial applications, such as high-speed inline measurement and surface defect inspection, because of their high scanning frequency, continuous imaging capability, and high transmission efficiency. Furthermore, the research on binocular stereocalibration methodologies for line-scan cameras remains relatively limited and operationally complex. In particular, there is still a lack of in-depth theoretical research on viewing-plane coincidence adjustment, which fundamentally restricts the spatial detection accuracy of binocular line-scan systems. To address these challenges, this paper proposes a novel static calibration method for monocular line-scan cameras by introducing a viewing-plane coordinate system into a traditional imaging model. This approach uses a simply designed 2-D calibration target and eliminates the need for complex patterns or precise target translation. Building on this monocular framework, we developed a comprehensive binocular line-scan camera imaging model. A key contribution of this study is the introduction of a viewing-plane coincidence correction model that effectively mitigates the potential parallax issues in binocular systems. Subsequently, a virtual 3-D target-based calibration method for binocular line-scan cameras was proposed to facilitate highly accurate spatial detection. Experimental validation demonstrated the high precision and robustness of the proposed approach. The monocular calibration achieves a root mean square reprojection error of 0.26 pixels, while the binocular system attains a spatial detection accuracy of 0.12 mm. These results confirm the efficacy and potential of the proposed methods for high-precision machine-vision applications.
- 25 April 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
A novel ensemble learning framework based on a dynamic pruning strategy for steel tube outer diameter prediction in the hot rolling industry
Precise prediction of cold-state outer diameter (OD) is essential for dimensional quality control in hot-rolled seamless steel tube production, yet remains challenging under multi-grade and multi-specification operation where process regimes change frequently, and prediction errors can become heavy-tailed. This study proposes an interpretable ensemble learning framework for OD prediction based on a stacking architecture, in which an instance-wise dynamic pruning strategy is introduced to deactivate locally uncompetitive base learners during inference using out-of-fold error evidence. Evaluations under progressively reduced training scales demonstrate consistent generalisation gains; at a 90% training size, the pruned ensemble reduces the test root mean square error from 1.1705 mm to 0.9551 mm with a test mean absolute error of 0.7534 mm and a coefficient of determination of 0.9972, indicating effective suppression of extreme deviations. Model transparency is established via Shapley Additive Explanations and partial dependence plots, which reveal a dominant sizing-stage speed-schedule structure and stage-resolved interaction patterns that are operationally meaningful for process monitoring. Validation at plant scale conducted on 15,300 production samples encompassing nine steel grades and five OD specifications demonstrates a stable error envelope centred near zero. Across all grades, the proportion of predictions within a tolerance of ±4 mm consistently exceeds 98.4%.
- 25 April 2026
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
A novel ensemble learning framework based on a dynamic pruning strategy for steel tube outer diameter prediction in the hot rolling industry
Precise prediction of cold-state outer diameter (OD) is essential for dimensional quality control in hot-rolled seamless steel tube production, yet remains challenging under multi-grade and multi-specification operation where process regimes change frequently, and prediction errors can become heavy-tailed. This study proposes an interpretable ensemble learning framework for OD prediction based on a stacking architecture, in which an instance-wise dynamic pruning strategy is introduced to deactivate locally uncompetitive base learners during inference using out-of-fold error evidence. Evaluations under progressively reduced training scales demonstrate consistent generalisation gains; at a 90% training size, the pruned ensemble reduces the test root mean square error from 1.1705 mm to 0.9551 mm with a test mean absolute error of 0.7534 mm and a coefficient of determination of 0.9972, indicating effective suppression of extreme deviations. Model transparency is established via Shapley Additive Explanations and partial dependence plots, which reveal a dominant sizing-stage speed-schedule structure and stage-resolved interaction patterns that are operationally meaningful for process monitoring. Validation at plant scale conducted on 15,300 production samples encompassing nine steel grades and five OD specifications demonstrates a stable error envelope centred near zero. Across all grades, the proportion of predictions within a tolerance of ±4 mm consistently exceeds 98.4%.
- 19 January 2026
- Published by Wiley in Steel Research International
- Vol. 97 (7) , 3536-3548
Interpretable Prediction of Mechanical Properties for Hot‐Rolled Seamless Steel Pipes: Combining Machine Learning with Shapley Additive Explanation
In order to improve the efficiency of mechanical performance testing of seamless steel pipes, enhance product quality, and reduce the cost of new product development, a machine learning‐based prediction model for the mechanical properties of hot continuous rolling seamless steel pipes is proposed. Specifically, a Bayesian optimization optimized categorical boosting (CatBoost) algorithm is employed to train on production data of 723 seamless steel pipes from a 460 mm steel plant. Its predictive performance is compared with other machine learning models, including support vector regression, random forest, and extreme gradient boosting. Furthermore, the Shapley additive explanations method is used for post hoc interpretability analysis of the prediction model. Results demonstrate that the BO‐CatBoost model achieves superior performance, offering higher prediction accuracy. Interpretability analysis further reveals that elongation is primarily influenced by diameter and the contents of C, V; yield strength is mainly affected by rolling temperature and the contents of MN, V; while rolling temperature, sizing temperature, and thickness are the key factors affecting tensile strength. Finally, a prediction system based on the proposed method is developed and is applied in industrial production.
- 19 January 2026
- Published by Wiley in Steel Research International
- Vol. 97 (7) , 3536-3548
Interpretable Prediction of Mechanical Properties for Hot‐Rolled Seamless Steel Pipes: Combining Machine Learning with Shapley Additive Explanation
In order to improve the efficiency of mechanical performance testing of seamless steel pipes, enhance product quality, and reduce the cost of new product development, a machine learning‐based prediction model for the mechanical properties of hot continuous rolling seamless steel pipes is proposed. Specifically, a Bayesian optimization optimized categorical boosting (CatBoost) algorithm is employed to train on production data of 723 seamless steel pipes from a 460 mm steel plant. Its predictive performance is compared with other machine learning models, including support vector regression, random forest, and extreme gradient boosting. Furthermore, the Shapley additive explanations method is used for post hoc interpretability analysis of the prediction model. Results demonstrate that the BO‐CatBoost model achieves superior performance, offering higher prediction accuracy. Interpretability analysis further reveals that elongation is primarily influenced by diameter and the contents of C, V; yield strength is mainly affected by rolling temperature and the contents of MN, V; while rolling temperature, sizing temperature, and thickness are the key factors affecting tensile strength. Finally, a prediction system based on the proposed method is developed and is applied in industrial production.