JAJungkeun Ahn

Jungkeun Ahn

*This is an algorithmically generated author record based on publicly available information.

Jungkeun Ahn has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    High-Conductivity Solid-State Electrolytes Through Low-Temperature Hot-Pressing of LCBA/LATP Composites

    by Wookyung Lee, Jaeseung Choi, Jungkeun Ahn, Hanbyul Lee, Byungwook Kim, Youngsoo Seo, Changbun Yoon

    Solid-state electrolytes (SSEs) are essential for achieving long-term stability and fast-charging performance in secondary batteries. Although Li1.3Al0.3Ti1.7(PO4)3 (LATP) offers high ionic conductivity, its practical application is restricted by high-temperature sintering requirements and interfacial reduction at the lithium anode. In contrast, Li-based oxide electrolytes can be sintered below 600 °C, offering improved compatibility with conventional electrodes such as graphite and silicon. In this study, a Li2O–LiCl–B2O3–Al2O3 (LCBA)/LATP composite SSE was fabricated via hot-press co-sintering at 600 °C. Composites with LCBA:LATP weight ratios of 8:2, 7:3, 6:4, 5:5, 3:7, and 2:8 were prepared to identify the optimal composition. The 3:7 composite achieved a sintered density of 2.40 g/cm3 and an ionic conductivity of 2.5 × 10−4 S/cm. Phase evolution and sintering behavior were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Compared to single-phase LCBA or LATP, the composite electrolyte exhibited improved interfacial stability and lower interfacial resistance against lithium metal.


  • Open Access

    Low-Temperature Co-Sintering of Li-Glass Solid Electrolytes and Li-Glass/Graphite Composite Anodes via Hot Press Processing

    by Youngsun Ko, Hanbyul Lee, Wookyung Lee, Jaeseung Choi, Jungkeun Ahn, Youngsoo Seo, Chang-Bun Yoon

    With the expanding electric vehicle market, there is increasing demand for improved battery safety and fast-charging performance. Ceramic-based solid electrolytes have attracted attention due to their high thermal and electrochemical stabilities. Li-glass solid electrolytes (e.g., Li2O–LiCl–B2O3–Al2O3, LCBA) are promising materials because they enable low-temperature sintering (−5 S cm−1. Additionally, the composite containing 50 wt% LCBA achieved a maximum tensile stress of ~0.23 MPa and a high interfacial fracture energy of ~180–200 J m−2, indicating enhanced deformation tolerance and fracture resistance. This approach improves the densification, ionic conductivity, and interfacial mechanical stability of LCBA solid electrolytes and their composite anodes, highlighting their potential for next-generation all-solid-state secondary battery applications.