Sh.A. Baghirov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sh.A. Baghirov has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- Alovsat Baghirov
Азербайджанский Государственный Университет Нефти и Промышленности
2 shared publications - Boris K. Ilienko
The Gas Institute of the National Academy of Sciences of Ukraine, Kyiv
1 shared publication - Elman Kh. Iskandarov
Azerbaijan State Oil and Industry University
1 shared publication - Inglab Aliyev
Azerbaijan State Oil and Industry University
1 shared publication - S.G. Abduragimov
Азербайджанский Государственный Университет Нефти и Промышленности
1 shared publication
Latest Publications
- Open Access
- 1 April 2026
- Published by The Gas Institute of the National Academy of Sciences of Ukraine in Energy Technologies & Resource Saving
- Vol. 86 (1) , 154-165
CASCADE-SHOCK-WAVE TECHNOLOGY FOR ELIMINATION OF COMPLETE HYDRATE BLOCKAGE OF AN UNDERWATER MARINE GAS PIPELINE
The article considers the issues of forecasting the conditions of hydrate formation during transportation of natural gas through subsea gas pipelines and methods for eliminating multi-stage complications. For the first time, a theoretical interpretation of the newly developped technology of cascade-shock-wave elimination of complete blockage of a gas pipeline by a hydrate plug is proposed and its practical implementation is described. The specificity of hydrate formation in offshore subsea gas pipelines and the unsuitability of methods developed for gas pipelines on land in marine conditions are noted. Additional factors influencing the processes of hydrate formation and methods for their elimination are indicated, a colder temperature at the depth of the gas pipeline, the impossibility of using, unlike on land, additional devices for measuring pressure and temperature along the pipeline. The author's systematization of the stages of hydrate formation in the main subsea gas pipeline, the corresponding methods for predicting the level of risk and eliminating emerging problems are given. The mathematical models and theoretical nuances of the proposed cascade-shock-wave technology, consisting of cyclic supply of high-pressure gas to a gas pipeline that was stopped due to hydrate blockage and then emptied, are considered. As a result of the analysis of the processes of high-pressure gas movement, it was revealed that each subsequent compression pulse, propa-gating with an ever-increasing speed of sound through the already heated gas, will catch up with the previous ones, forming a shock wave front. Natural constrictions of low sections of the pipeline due to accumulation of condensate perform the functions of nozzles, repeatedly passing through which gas flows acquire velocities exceeding the speed of sound. The procedure for carrying out an operation to eliminate a hydrate plug on a real gas pipeline is described, calculations of temperature conditions at the point of contact with the hydrate plug are carried out, the dependence of the temperature at the point of contact on the pressure of high-pressure gas supply to the gas pipeline is determined. In connection with the short-term (several seconds) although quite high heating of the plane of contact with the hydrate plug, it is justified to conduct several cycles of high-pressure gas supply to the emergency gas pipeline. The developed and tested cascade-shock-wave technology for eliminating the complete hydrate blockage of an underwater marine gas pipeline is based on the combined effect of thermal heating of the hydrate plug due to the increase in temperature in the plane of contact due to the formation of a supersonic flow and a dynamic wave gas flow. Bibl. 15, Tab. 1, Fig. 2.
- 1 April 2026
- Published by The Gas Institute of the National Academy of Sciences of Ukraine in Energy Technologies & Resource Saving
- Vol. 86 (1) , 154-165
Open AccessCASCADE-SHOCK-WAVE TECHNOLOGY FOR ELIMINATION OF COMPLETE HYDRATE BLOCKAGE OF AN UNDERWATER MARINE GAS PIPELINE
The article considers the issues of forecasting the conditions of hydrate formation during transportation of natural gas through subsea gas pipelines and methods for eliminating multi-stage complications. For the first time, a theoretical interpretation of the newly developped technology of cascade-shock-wave elimination of complete blockage of a gas pipeline by a hydrate plug is proposed and its practical implementation is described. The specificity of hydrate formation in offshore subsea gas pipelines and the unsuitability of methods developed for gas pipelines on land in marine conditions are noted. Additional factors influencing the processes of hydrate formation and methods for their elimination are indicated, a colder temperature at the depth of the gas pipeline, the impossibility of using, unlike on land, additional devices for measuring pressure and temperature along the pipeline. The author's systematization of the stages of hydrate formation in the main subsea gas pipeline, the corresponding methods for predicting the level of risk and eliminating emerging problems are given. The mathematical models and theoretical nuances of the proposed cascade-shock-wave technology, consisting of cyclic supply of high-pressure gas to a gas pipeline that was stopped due to hydrate blockage and then emptied, are considered. As a result of the analysis of the processes of high-pressure gas movement, it was revealed that each subsequent compression pulse, propa-gating with an ever-increasing speed of sound through the already heated gas, will catch up with the previous ones, forming a shock wave front. Natural constrictions of low sections of the pipeline due to accumulation of condensate perform the functions of nozzles, repeatedly passing through which gas flows acquire velocities exceeding the speed of sound. The procedure for carrying out an operation to eliminate a hydrate plug on a real gas pipeline is described, calculations of temperature conditions at the point of contact with the hydrate plug are carried out, the dependence of the temperature at the point of contact on the pressure of high-pressure gas supply to the gas pipeline is determined. In connection with the short-term (several seconds) although quite high heating of the plane of contact with the hydrate plug, it is justified to conduct several cycles of high-pressure gas supply to the emergency gas pipeline. The developed and tested cascade-shock-wave technology for eliminating the complete hydrate blockage of an underwater marine gas pipeline is based on the combined effect of thermal heating of the hydrate plug due to the increase in temperature in the plane of contact due to the formation of a supersonic flow and a dynamic wave gas flow. Bibl. 15, Tab. 1, Fig. 2.
- Open Access
- 30 January 2026
- Published by National Research Tomsk Polytechnic University in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
- Vol. 337 (1) , 193-199
Development of technology for buılding-up the flow rate of underground gas storage wells
Relevance. The need to understand the mechanisms of reducing effective gas permeability, gas and condensate flow rates due to the formation of a liquid hydrocarbon phase and accumulation of liquid around underground gas storage wells, as well as the entire range of gas condensate wells at bottomhole pressure below the liquid dew point. Aim. To develop a technology for restoring the parameters of gas injection and extraction from underground gas storage wells by cleaning the bottomhole zone of wells from accumulated liquid. Methods. Analytical studies, laboratory analyzes of well fluid samples, field tests, statistical methods. Results and conclusions. It is shown that since underground gas storage facilities are created on depleted gas condensate deposits, their wells have most of the operational characteristics of gas condensate wells in general. Along with this, the article also examines and reflects a number of features characteristic of a underground gas storage well. The authors have proposed a technology for using an inexpensive solvent such as methanol to increase the production rate of wells by cleaning the bottom-hole zone of the well. The criteria for selecting candidate gas condensate wells for applying the technology are indicated. The authors give the recommendations on parametric requirements and methanol consumption rates for wells subject to selection for the application of technology to increase production by cleaning the bottom-hole zone of gas wells from liquid plugs. It was established that in underground gas storage wells with operating pressure in the range of 7.0–16.0 MPa, ideal conditions are created for retrograde settling of liquid. The paper provides the ınformation on the progress of field tests, the results obtained and their analysis. By applying the technology in field conditions, the result obtained was to double the injectivity of a underground gas storage well during gas injection. It is shown that if before the impact the share of the experimental well in the total injection volume was 0.51–0.5.6%, then after the impact this figure changes in the range of 0.84–1.72%, that is, the increase was from 1.5 to 3 once. In this regard, a conclusion was also made about an increase in the well flow rate during the gas withdrawal season.
- 30 January 2026
- Published by National Research Tomsk Polytechnic University in Bulletin of the Tomsk Polytechnic University Geo Assets Engineering
- Vol. 337 (1) , 193-199
Open AccessDevelopment of technology for buılding-up the flow rate of underground gas storage wells
Relevance. The need to understand the mechanisms of reducing effective gas permeability, gas and condensate flow rates due to the formation of a liquid hydrocarbon phase and accumulation of liquid around underground gas storage wells, as well as the entire range of gas condensate wells at bottomhole pressure below the liquid dew point. Aim. To develop a technology for restoring the parameters of gas injection and extraction from underground gas storage wells by cleaning the bottomhole zone of wells from accumulated liquid. Methods. Analytical studies, laboratory analyzes of well fluid samples, field tests, statistical methods. Results and conclusions. It is shown that since underground gas storage facilities are created on depleted gas condensate deposits, their wells have most of the operational characteristics of gas condensate wells in general. Along with this, the article also examines and reflects a number of features characteristic of a underground gas storage well. The authors have proposed a technology for using an inexpensive solvent such as methanol to increase the production rate of wells by cleaning the bottom-hole zone of the well. The criteria for selecting candidate gas condensate wells for applying the technology are indicated. The authors give the recommendations on parametric requirements and methanol consumption rates for wells subject to selection for the application of technology to increase production by cleaning the bottom-hole zone of gas wells from liquid plugs. It was established that in underground gas storage wells with operating pressure in the range of 7.0–16.0 MPa, ideal conditions are created for retrograde settling of liquid. The paper provides the ınformation on the progress of field tests, the results obtained and their analysis. By applying the technology in field conditions, the result obtained was to double the injectivity of a underground gas storage well during gas injection. It is shown that if before the impact the share of the experimental well in the total injection volume was 0.51–0.5.6%, then after the impact this figure changes in the range of 0.84–1.72%, that is, the increase was from 1.5 to 3 once. In this regard, a conclusion was also made about an increase in the well flow rate during the gas withdrawal season.