SPShane Annabella Nusa Pratiwi

Shane Annabella Nusa Pratiwi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Shane Annabella Nusa Pratiwi has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Mechanistic insights into surface interdiffusion of oriented bioplastic fibres in self-reinforced polymer composites

    by Peter Halley, Ashok Kumar Nanjundan, Russell J. Varley, Shazed Aziz, Ton Peijs, Shane Pratiwi, Liugi Vandi, Emilie Gauthier, Tony McNally

    Bioplastics such as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) offer biodegradability but remain brittle and thermally unstable, limiting broader application. Conventional biocomposites reinforced with fillers like wood and carbon can improve mechanical properties but suffer from poor fibre–matrix adhesion, inconsistent biodegradability and limited recyclability. Here we address this limitation by developing self-reinforced unidirectional laminates (UDLs) fabricated entirely from a single PHBV polymer. Continuous melt-spun fibres were drawn in two stages to induce chain orientation, increasing melting temperature by ~9 °C and tensile strength by ~77% relative to undrawn filaments (UDF). These fibres were then aligned and consolidated by selective hot compaction, where fibre skins softened and interdiffused while oriented crystalline cores remained intact. The resulting mono-material laminates exhibited sharpened and slightly elevated melting transitions, consistent with lamellar thickening and interfacial recrystallisation. Resultant Young’s modulus and tensile strength of the UDLs surpassed isotropic PHBV by ~46% and ~63%, respectively, with only modest loss in ductility. Nanoindentation mapping revealed a continuous stiffness gradient; high in fibre cores, intermediate in interphases and lower in recrystallised matrix regions, demonstrating efficient stress transfer across welded junctions. This scalable method delivers high-performance PHBV materials with full recyclability and biodegradability features, addressing processing limitations and enabling sustainable engineering and packaging applications.

  • Open Access

    Biopolymer‐Coated Paper Composites for Sustainable Packaging

    by Shane Annabella Nusa Pratiwi, Peter J. Halley, Emilie Gauthier

    Conventional plastic packaging, though dominant in food and flexible applications, poses serious environmental concerns due to its persistence and limited recyclability. To address this challenge, this study develops bio‐based coated paper composites as sustainable alternatives. Paper, while biodegradable, lacks adequate barrier properties. To overcome these limitations, in this study, multilayer coatings are fabricated using thermoplastic starch/polyvinyl alcohol (TPS/PVOH) as a base layer and either amorphous polyhydroxyalkanoate (aPHA) or poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) as the top coating, applied via solvent casting on two grades of paper substrates, a 60 GSM printing paper and a 55 GSM thin paper relevant to food packaging application. Mechanical and barrier performances are evaluated through tensile testing, water absorption and water vapour permeability (WVP) measurements. The results show that aPHA coatings exhibit higher tensile strength, whereas PHBV demonstrates greater elongation at break, indicating suitability for rigid and flexible applications, respectively. Both coatings reduce surface hydrophobicity compared to uncoated paper, while the starch base layer enhances film uniformity. Overall, the study demonstrates the potential of bio‐based multilayer paper composites as promising candidates for sustainable and functional packaging solutions.