Ming Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ming Cheng has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Bing Han
School of Information and Control Engineering, China University of Mining and Technology, Xuzhou, China
1 shared publication Chen Yu
School of Information Science and Engineering and the State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, China
1 shared publication- Haiming Wang
Southeast University
1 shared publication - Jun Wang
China University of Mining and Technology
1 shared publication - Lei Zhao
China University of Mining and Technology
1 shared publication - Qi Wu
Southeast University
1 shared publication
Latest Publications
- 17 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2200-2204
A Cavity-Backed Slot Antenna With Dual-Polarized In-Band RCS Reduction Using Polarization Conversion Metasurface
In this letter, a cavity-backed slot (CBS) array with wideband radiation and low in-band dual-polarized scattering is presented. The radiator of the wideband antenna element is a metallic cavity, which is fed by a microstrip line on the substrate. The polarization conversion metasurface (PCM) is designed to reduce the in-band radar cross section (RCS) of the antenna array. Its operating frequency range covers the antenna impedance bandwidth from 5.5 to 7.7 GHz. Simulated and measured results show that the low-scattering antenna has a -10 dB impedance bandwidth of 33.3%, and a stable realized gain greater than 13 dBi. Furthermore, the array has a dual-polarized RCS reduction higher than 10 dB from 5.4 to 8.5 GHz compared with the reference antenna. A prototype is fabricated and tested, and measured results are in good agreement with the simulation results.
- 17 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (5) , 2200-2204
A Cavity-Backed Slot Antenna With Dual-Polarized In-Band RCS Reduction Using Polarization Conversion Metasurface
In this letter, a cavity-backed slot (CBS) array with wideband radiation and low in-band dual-polarized scattering is presented. The radiator of the wideband antenna element is a metallic cavity, which is fed by a microstrip line on the substrate. The polarization conversion metasurface (PCM) is designed to reduce the in-band radar cross section (RCS) of the antenna array. Its operating frequency range covers the antenna impedance bandwidth from 5.5 to 7.7 GHz. Simulated and measured results show that the low-scattering antenna has a -10 dB impedance bandwidth of 33.3%, and a stable realized gain greater than 13 dBi. Furthermore, the array has a dual-polarized RCS reduction higher than 10 dB from 5.4 to 8.5 GHz compared with the reference antenna. A prototype is fabricated and tested, and measured results are in good agreement with the simulation results.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1742-1746
Sequential Hybrid Synthesis for Thinned Prephased Electronically Steered Phased Array Using Low-Resolution Phase Shifters and RF Switches
To reduce the complexity of large-scale electronically steered phased arrays (ESPAs) that use high-resolution attenuators and phase shifters, this letter proposes a sequential hybrid method. The method can synthesize a thinned prephased ESPA (TPESPA) that uses low-resolution phase shifters and 1-bit RF switches, while maintaining low sidelobe levels (SLLs) and high gains. The approach sequentially synthesizes the high-dimensional 0-1 amplitude vector, the prephase vector, and the one-dimensional reference phase. It thereby overcomes challenges such as slow computation, the unstable results of existing 0-1 amplitude algorithms, and the large storage demands of existing phasing methods. Simulations and measurements show that the synthesized $32\times 32$-unit TPESPA controlled by 2-bit phase shifters and 1-bit RF switches demonstrates SLLs between $-20.0$ dB and $-18.0$ dB, with an average increase in active gain of 1.1dB for a sparsity of 26.6% compared to a Taylor array using 6-bit phase-amplitude control.
- 10 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (4) , 1742-1746
Sequential Hybrid Synthesis for Thinned Prephased Electronically Steered Phased Array Using Low-Resolution Phase Shifters and RF Switches
To reduce the complexity of large-scale electronically steered phased arrays (ESPAs) that use high-resolution attenuators and phase shifters, this letter proposes a sequential hybrid method. The method can synthesize a thinned prephased ESPA (TPESPA) that uses low-resolution phase shifters and 1-bit RF switches, while maintaining low sidelobe levels (SLLs) and high gains. The approach sequentially synthesizes the high-dimensional 0-1 amplitude vector, the prephase vector, and the one-dimensional reference phase. It thereby overcomes challenges such as slow computation, the unstable results of existing 0-1 amplitude algorithms, and the large storage demands of existing phasing methods. Simulations and measurements show that the synthesized $32\times 32$-unit TPESPA controlled by 2-bit phase shifters and 1-bit RF switches demonstrates SLLs between $-20.0$ dB and $-18.0$ dB, with an average increase in active gain of 1.1dB for a sparsity of 26.6% compared to a Taylor array using 6-bit phase-amplitude control.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1014-1018
All-Metal Ka-Band Dual-CP Antenna With Wideband and Low-Profile Characteristics for High-Speed Aircraft Applications
A $2\times 2$ Ka-band dual-circularly-polarized antenna for high-speed aircraft applications is proposed. It simultaneously achieves a broadband and a low profile in an all-metal structure. The antenna comprises three key components: (1) a compact dual-linearly-polarized power divider for broadband impedance matching and a stable $0^\circ$ or $-180^\circ$ phase difference, (2) differential phase shifters to achieve a wideband $90^\circ$ phase difference and a low profile, and (3) quadruple-ridged horns for high aperture efficiency and a further reduced profile. The antenna features an overall low profile of only 2.9 $ \lambda _{0}$ (free-space wavelength at the center frequency). Simulated and measured results show that the antenna achieves a 3-dB gain bandwidth of 29.6%. Within this bandwidth, the reflection coefficients of both ports are below $-10$ dB; the port isolation exceeds 20dB; the axial ratio (AR) is below 1.9dB; the peak gain reaches 14.2 dBic; and the peak aperture efficiency is 49%.
- 22 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 25 (3) , 1014-1018
All-Metal Ka-Band Dual-CP Antenna With Wideband and Low-Profile Characteristics for High-Speed Aircraft Applications
A $2\times 2$ Ka-band dual-circularly-polarized antenna for high-speed aircraft applications is proposed. It simultaneously achieves a broadband and a low profile in an all-metal structure. The antenna comprises three key components: (1) a compact dual-linearly-polarized power divider for broadband impedance matching and a stable $0^\circ$ or $-180^\circ$ phase difference, (2) differential phase shifters to achieve a wideband $90^\circ$ phase difference and a low profile, and (3) quadruple-ridged horns for high aperture efficiency and a further reduced profile. The antenna features an overall low profile of only 2.9 $ \lambda _{0}$ (free-space wavelength at the center frequency). Simulated and measured results show that the antenna achieves a 3-dB gain bandwidth of 29.6%. Within this bandwidth, the reflection coefficients of both ports are below $-10$ dB; the port isolation exceeds 20dB; the axial ratio (AR) is below 1.9dB; the peak gain reaches 14.2 dBic; and the peak aperture efficiency is 49%.