Tanushree Ghosh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tanushree Ghosh has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Rajesh Kumar
Indian Institute of Technology Indore
8 shared publications Chanchal Rani
Materials and Device Laboratory, Department of Physics, Indian Institute of Technology Indore, Simrol-453552, India
7 shared publicationsSuchita Kandpal
Materials and Device Laboratory, Department of Physics, Indian Institute of Technology Indore, Simrol-453552, India
6 shared publicationsManushree Tanwar
Department of Chemistry University of Pennsylvania 231S. 34 Street Philadelphia PA 19104‐6323 USA
4 shared publications- Anjali Chaudhary
Department of Physics, Indian Institute of Technology Bhilai, Bhilai, Chhattisgarh 491002, India
3 shared publications Devesh K. Pathak
Materials and Device Laboratory, Department of Physics, Indian Institute of Technology Indore 1 , Simrol 453552, India
3 shared publications
Latest Publications
- 27 June 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (18) , 1-16
Design and fabrication of dual electrochromic device with broader color space
- 27 June 2024
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 35 (18) , 1-16
Design and fabrication of dual electrochromic device with broader color space
- 14 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (37) , 12590-12598
Bifunctional solid state electrochromic device using WO 3 /WS 2 nanoflakes for charge storage and dual-band color modulation
An electrochromic supercapacitor device, designed using WO 3 /WS 2 nanoflakes, successfully demonstrated excellent capacitive performance along with the ability of electrochromic color modulation when P3HT and viologen are used as electrochromic active components.
- 14 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 11 (37) , 12590-12598
Bifunctional solid state electrochromic device using WO 3 /WS 2 nanoflakes for charge storage and dual-band color modulation
An electrochromic supercapacitor device, designed using WO 3 /WS 2 nanoflakes, successfully demonstrated excellent capacitive performance along with the ability of electrochromic color modulation when P3HT and viologen are used as electrochromic active components.
- 4 April 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (12)
Recipe for Fabricating Optimized Solid‐State Electrochromic Devices and Its Know‐How: Challenges and Future
Electrochromism, a well‐defined phenomenon of bias‐induced reversible color switching, has led to real applications in several smart devices including smart windows and self‐powered batteries and solar panels. For these applications, the electrochromic (EC) materials need to be integrated as solid‐state devices. Deciphering ways to recreate a conventional device requires understanding of basic structure and its working. A thorough discussion is provided here regarding various materials that can act as chromophores when treated with some electric bias in addition to a few parameters that dictatehow fairly the device performs. The next important aspect is the device design, the skeleton of which usually includes conducting substrates, EC active materials, and an electrolyte. Step‐by‐step, various available device paradigms are discussed starting from a single EC electrode then joining a blank substrate to fabricate a monolayer electrochromic device (ECD) moving onto bi‐layer ECDs, and finally, all‐in‐one EC gel, which is devoid of any proper layered pattern. A thorough discussion regarding various application‐oriented structural modifications is provided. Challenges and the areas that need to be addressed in immediate future are discussed.
- 4 April 2023
- Published by Wiley in Advanced Optical Materials
- Vol. 11 (12)
Recipe for Fabricating Optimized Solid‐State Electrochromic Devices and Its Know‐How: Challenges and Future
Electrochromism, a well‐defined phenomenon of bias‐induced reversible color switching, has led to real applications in several smart devices including smart windows and self‐powered batteries and solar panels. For these applications, the electrochromic (EC) materials need to be integrated as solid‐state devices. Deciphering ways to recreate a conventional device requires understanding of basic structure and its working. A thorough discussion is provided here regarding various materials that can act as chromophores when treated with some electric bias in addition to a few parameters that dictatehow fairly the device performs. The next important aspect is the device design, the skeleton of which usually includes conducting substrates, EC active materials, and an electrolyte. Step‐by‐step, various available device paradigms are discussed starting from a single EC electrode then joining a blank substrate to fabricate a monolayer electrochromic device (ECD) moving onto bi‐layer ECDs, and finally, all‐in‐one EC gel, which is devoid of any proper layered pattern. A thorough discussion regarding various application‐oriented structural modifications is provided. Challenges and the areas that need to be addressed in immediate future are discussed.
- Open Access
- 30 November 2022
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (2)
Multiwavelength Color Switching from Polyaniline‐Viologen Bilayer: Inching toward Versatile All‐Organic Flexible Electrochromic Device
Search for a versatile flexible all‐organic liquid electrolyte‐less solid–state electrochromic device continues. In this quest, a polyaniline‐Viologen‐(PANI‐EV)‐based electrochromic device has been reported and designed based on the complementary redox behavior and easy processibility. Electrochromic electrodes are first individually characterized before the device fabrication, to check their compatibility. The polyaniline electrode is electrodeposited and characterized using scanning electron microscopy and Raman techniques followed by bias dependent absorbance measurements to understand its color switching capabilities. In situ kinematics are performed on the finished solid–state device and electrochromic performance have been measured. An improved electrochromic performance can be observed as evident from <1 s switching time while switching with a color contrast of ≈75% and good cycle life. The device displays switching in visible, as well as IR and NIR regions with an application of bias as low as 1.5 V. In addition to the multiple wavelength switching, a device has also been fabricated on a plastic electrode to demonstrate all‐organic flexible liquid electrolyte less solid–state versatile electrochromic device.
- 30 November 2022
- Published by Wiley in Advanced Electronic Materials
- Vol. 9 (2)
Open AccessMultiwavelength Color Switching from Polyaniline‐Viologen Bilayer: Inching toward Versatile All‐Organic Flexible Electrochromic Device
Search for a versatile flexible all‐organic liquid electrolyte‐less solid–state electrochromic device continues. In this quest, a polyaniline‐Viologen‐(PANI‐EV)‐based electrochromic device has been reported and designed based on the complementary redox behavior and easy processibility. Electrochromic electrodes are first individually characterized before the device fabrication, to check their compatibility. The polyaniline electrode is electrodeposited and characterized using scanning electron microscopy and Raman techniques followed by bias dependent absorbance measurements to understand its color switching capabilities. In situ kinematics are performed on the finished solid–state device and electrochromic performance have been measured. An improved electrochromic performance can be observed as evident from <1 s switching time while switching with a color contrast of ≈75% and good cycle life. The device displays switching in visible, as well as IR and NIR regions with an application of bias as low as 1.5 V. In addition to the multiple wavelength switching, a device has also been fabricated on a plastic electrode to demonstrate all‐organic flexible liquid electrolyte less solid–state versatile electrochromic device.
- 5 July 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (37) , 375101
MoS2 doping and concentration optimization for application-specific design of P3HT-viologen-based solid state electrochromic device
Methods to improve the performance of solid state electrochromic devices (ECDs) need to be explored and the dynamic doping process must be optimized to achieve ideal device performance. Molybdenum disulphide (MoS2) doped ECD has been fabricated by using two conducting polymeric films, i.e. polythiophene (P3HT) and ethyl viologen (EV), to investigate the role of 2D material doping on the overall device performance. Hydrothermally grown MoS2 nanoflowers, characterized using x-ray diffraction, electron microscopy and Raman spectroscopy were used for this purpose. Furthermore, the effect of MoS2 dopant concentration on the performance of an EV/P3HT-based ECD was studied systematically. The prepared solid-state ECD shows improved electrochromic performance in terms of switching speed, color contrast and coloration efficiency while switching its color from one state to the other (magenta and blue) under a very small external bias (±1.4 V). The transition from colored to bleached state is fastest for the highest (0.3 wt%) MoS2-doped ECD, whereas the color contrast and coloration efficiency is maximum for the lowest (0.1 wt%) MoS2-doped device. The variation in electrochromic parameters as a function of dopant (MoS2) concentration reveals that an appropriate concentration must be chosen depending on the requirement
- 5 July 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 55 (37) , 375101
MoS2 doping and concentration optimization for application-specific design of P3HT-viologen-based solid state electrochromic device
Methods to improve the performance of solid state electrochromic devices (ECDs) need to be explored and the dynamic doping process must be optimized to achieve ideal device performance. Molybdenum disulphide (MoS2) doped ECD has been fabricated by using two conducting polymeric films, i.e. polythiophene (P3HT) and ethyl viologen (EV), to investigate the role of 2D material doping on the overall device performance. Hydrothermally grown MoS2 nanoflowers, characterized using x-ray diffraction, electron microscopy and Raman spectroscopy were used for this purpose. Furthermore, the effect of MoS2 dopant concentration on the performance of an EV/P3HT-based ECD was studied systematically. The prepared solid-state ECD shows improved electrochromic performance in terms of switching speed, color contrast and coloration efficiency while switching its color from one state to the other (magenta and blue) under a very small external bias (±1.4 V). The transition from colored to bleached state is fastest for the highest (0.3 wt%) MoS2-doped ECD, whereas the color contrast and coloration efficiency is maximum for the lowest (0.1 wt%) MoS2-doped device. The variation in electrochromic parameters as a function of dopant (MoS2) concentration reveals that an appropriate concentration must be chosen depending on the requirement
- 12 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (15) , 153301
Multi-walled carbon nanotubes doping for fast and efficient hybrid solid state electrochromic device
Overall performance of a polythiophene-ethyl viologen-based solid state electrochromic device has been improved by doping with multi-walled carbon nanotubes (MWCNTs) to exploit its ballistic transport capabilities. The finished hybrid (organic–inorganic) device is free from liquid electrolyte and shows the most efficient color switching with a very small bias and high color contrast while switching between magenta and blue color states. The MWCNTs have been synthesized using the simple pyrolysis method and doped in the viologen containing layer after proper characterization using x-ray diffraction, electron microscopy, and Raman spectroscopy. In situ UV-Vis spectroscopy has been used to quantify the performance of the device that works on the mutual redox-based mechanism of viologen-polythiophene layers. In situ Raman microscopy and spectroscopy have been used to establish the working mechanism duly validated by electrical I-V characteristics of the device. The simple doping process makes the device the most efficient one in the family of polythiophene-based devices. Overall, a liquid electrolyte less, power efficient solid state electrochromic device with a switching time of 1s/0.5 s, a coloration efficiency of 401 cm2/C, a contrast ratio of 79%, and a stability of more than 100 cycles has been achieved.
- 12 April 2021
- Published by AIP Publishing in Applied Physics Letters
- Vol. 118 (15) , 153301
Multi-walled carbon nanotubes doping for fast and efficient hybrid solid state electrochromic device
Overall performance of a polythiophene-ethyl viologen-based solid state electrochromic device has been improved by doping with multi-walled carbon nanotubes (MWCNTs) to exploit its ballistic transport capabilities. The finished hybrid (organic–inorganic) device is free from liquid electrolyte and shows the most efficient color switching with a very small bias and high color contrast while switching between magenta and blue color states. The MWCNTs have been synthesized using the simple pyrolysis method and doped in the viologen containing layer after proper characterization using x-ray diffraction, electron microscopy, and Raman spectroscopy. In situ UV-Vis spectroscopy has been used to quantify the performance of the device that works on the mutual redox-based mechanism of viologen-polythiophene layers. In situ Raman microscopy and spectroscopy have been used to establish the working mechanism duly validated by electrical I-V characteristics of the device. The simple doping process makes the device the most efficient one in the family of polythiophene-based devices. Overall, a liquid electrolyte less, power efficient solid state electrochromic device with a switching time of 1s/0.5 s, a coloration efficiency of 401 cm2/C, a contrast ratio of 79%, and a stability of more than 100 cycles has been achieved.
- Open Access
- 25 March 2021
- Published by Institution of Engineering and Technology (IET) in IET Nanodielectrics
- Vol. 4 (4) , 193-200
Improved ionic solid/viologen hybrid electrochromic device using pre‐bleached Prussian‐blue electrode
The authors demonstrate how a simple step of loading an electrochromically active Prussian blue (PB; an ionic solid) electrode with Li + ions can help in achieving a more efficient viologen based solid state hybrid electrochromic device. To accomplish this, two different devices, with and without Li + ion loaded PB electrodes, have been fabricated. These devices have been compared in terms of their current‐voltage response, bias dependent optical modulation and corresponding colour switching to establish the role of Li + ion in charge transport and charge balancing involved during bias induced redox mediated colour switching of the two devices. The Li + containing PB electrode device exhibits a superior performance with twice (40%) the value of colour contrast (20%), quick response switching (1.3 s), excellent stability (8400 s) and better power efficiency as compared to the device containing as‐synthesised PB electrode. A mechanism has been proposed to explain the role of the Li + ion which is later substantiated using bias‐dependent in situ Raman spectroscopic evidences.
- 25 March 2021
- Published by Institution of Engineering and Technology (IET) in IET Nanodielectrics
- Vol. 4 (4) , 193-200
Open AccessImproved ionic solid/viologen hybrid electrochromic device using pre‐bleached Prussian‐blue electrode
The authors demonstrate how a simple step of loading an electrochromically active Prussian blue (PB; an ionic solid) electrode with Li + ions can help in achieving a more efficient viologen based solid state hybrid electrochromic device. To accomplish this, two different devices, with and without Li + ion loaded PB electrodes, have been fabricated. These devices have been compared in terms of their current‐voltage response, bias dependent optical modulation and corresponding colour switching to establish the role of Li + ion in charge transport and charge balancing involved during bias induced redox mediated colour switching of the two devices. The Li + containing PB electrode device exhibits a superior performance with twice (40%) the value of colour contrast (20%), quick response switching (1.3 s), excellent stability (8400 s) and better power efficiency as compared to the device containing as‐synthesised PB electrode. A mechanism has been proposed to explain the role of the Li + ion which is later substantiated using bias‐dependent in situ Raman spectroscopic evidences.
- 4 June 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (6) , 1768-1773
Prussian Blue-Cobalt Oxide Double Layer for Efficient All-Inorganic Multicolor Electrochromic Device
- 4 June 2020
- Published by American Chemical Society (ACS) in ACS Applied Electronic Materials
- Vol. 2 (6) , 1768-1773
Prussian Blue-Cobalt Oxide Double Layer for Efficient All-Inorganic Multicolor Electrochromic Device