Na Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Na Wang has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Siyu Lu
School of Electronic and Electrical Engineering, Ningxia University, Yinchuan 750021, China
3 shared publicationsMingliang Ma
School of Electronic and Electrical Engineering, Ningxia University, Yinchuan 750021, China
2 shared publicationsTongxin Jiang
2 shared publicationsZongbiao Liu
2 shared publicationsBing Sun
Beijing University of Agriculture
1 shared publicationCong Zhou
School of Electronic and Electrical Engineering Ningxia University Yinchuan China
1 shared publication
Latest Publications
- 19 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (44) , 21556-21568
Interfacial charge regulation in Ce-modified CdS-sensitized TiO 2 nanorod arrays for self-powered UV photodetection
Ce–CdS sensitized TiO 2 nanorod arrays are designed for self-powered UV photodetectors. Ce 3+ /Ce 4+ pairs tune interfacial charge transfer and accelerate carrier separation. The device shows excellent UV photoresponse and stability at zero bias.
- 19 November 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (44) , 21556-21568
Interfacial charge regulation in Ce-modified CdS-sensitized TiO 2 nanorod arrays for self-powered UV photodetection
Ce–CdS sensitized TiO 2 nanorod arrays are designed for self-powered UV photodetectors. Ce 3+ /Ce 4+ pairs tune interfacial charge transfer and accelerate carrier separation. The device shows excellent UV photoresponse and stability at zero bias.
- 7 November 2026
- Published by Elsevier in Solid State Sciences
- Vol. 183
CuO thin-film-sensitized TiO2 nanorod arrays for self-powered ultraviolet photodetection
- 7 November 2026
- Published by Elsevier in Solid State Sciences
- Vol. 183
CuO thin-film-sensitized TiO2 nanorod arrays for self-powered ultraviolet photodetection
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (19) , 5905-5917
Wavefront-Engineered Pd Metasurface for Spectrometer-Free Single-Point Photonic Hydrogen Readout
Palladium (Pd) hydride exhibits a reversible modulation of its plasmonic response under hydrogenation, but translating this material sensitivity into scalable photonic readout architectures remains challenging. Here we introduce a metasurface concept in which hydrogen-induced changes in Pd are directly mapped into far-field intensity variations through wavefront-engineered off-axis focusing. A nonlinear phase-encoding strategy enables deterministic conversion of the Pd hydrogenation state into spatially filtered focal signals, allowing single-point electrical readout without spectrometers or imaging systems. The resulting platform establishes a direct link between chemical-state modulation and photonic wavefront control, where hydrogenation-dependent plasmonic variations are transduced into monotonic intensity changes at a fixed detection point. Noise-limited analysis indicates that the encoded response remains resolvable under realistic detection conditions, while structural perturbations preserve the monotonic mapping. This work provides a general route toward chemical-state-to-intensity photonic transduction using metasurface wavefront engineering.
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 13 (19) , 5905-5917
Wavefront-Engineered Pd Metasurface for Spectrometer-Free Single-Point Photonic Hydrogen Readout
Palladium (Pd) hydride exhibits a reversible modulation of its plasmonic response under hydrogenation, but translating this material sensitivity into scalable photonic readout architectures remains challenging. Here we introduce a metasurface concept in which hydrogen-induced changes in Pd are directly mapped into far-field intensity variations through wavefront-engineered off-axis focusing. A nonlinear phase-encoding strategy enables deterministic conversion of the Pd hydrogenation state into spatially filtered focal signals, allowing single-point electrical readout without spectrometers or imaging systems. The resulting platform establishes a direct link between chemical-state modulation and photonic wavefront control, where hydrogenation-dependent plasmonic variations are transduced into monotonic intensity changes at a fixed detection point. Noise-limited analysis indicates that the encoded response remains resolvable under realistic detection conditions, while structural perturbations preserve the monotonic mapping. This work provides a general route toward chemical-state-to-intensity photonic transduction using metasurface wavefront engineering.
- 16 April 2026
- Published by Wiley in Energy Technology
- Vol. 14 (4)
Mechanisms of β ‐Particle Energy Deposition in Geometry‐Tailored TiO 2 Nano Truncated‐Conical Array Composite Films
To overcome the poor source collection and utilization efficiencies of conventional planar transducers in betavoltaic isotope batteries, we design an ordered three‐dimensional nano truncated‐conical array (TCA) composite thin‐film transduction structure based on the wide‐bandgap semiconductor TiO 2 . Monte Carlo simulations combining Geant4 and CASINO are used to systematically examine the transport trajectories and energy‐deposition characteristics of β particles emitted by 63 Ni within the TCA and reference film structures. We propose an optimization strategy for TiO 2 ‐based betavoltaic transducers, focusing on how the geometry of the transduction material‐specifically truncation height, array pitch, and the thickness of the underlying TiO 2 film‐governs the spatial distribution of deposited energy, thereby revealing the key factors that limit deposition efficiency. Simulations show that for 1000 incident β particles (total energy 17.4 × 10 3 keV), a TCA with a 400‐nm TiO 2 base film, a 1200‐nm truncation height, and no inter‐array gap yields a maximum deposited energy of ∼11.6 × 10 3 keV, corresponding to an absolute deposition efficiency of ∼66.7%. Compared with a planar film, the energy‐deposition efficiency within the effective volume is increased by 7.35%. These results provide essential theoretical support and technical guidance for performance optimization of wide‐bandgap TiO 2 betavoltaic devices.
- 16 April 2026
- Published by Wiley in Energy Technology
- Vol. 14 (4)
Mechanisms of β ‐Particle Energy Deposition in Geometry‐Tailored TiO 2 Nano Truncated‐Conical Array Composite Films
To overcome the poor source collection and utilization efficiencies of conventional planar transducers in betavoltaic isotope batteries, we design an ordered three‐dimensional nano truncated‐conical array (TCA) composite thin‐film transduction structure based on the wide‐bandgap semiconductor TiO 2 . Monte Carlo simulations combining Geant4 and CASINO are used to systematically examine the transport trajectories and energy‐deposition characteristics of β particles emitted by 63 Ni within the TCA and reference film structures. We propose an optimization strategy for TiO 2 ‐based betavoltaic transducers, focusing on how the geometry of the transduction material‐specifically truncation height, array pitch, and the thickness of the underlying TiO 2 film‐governs the spatial distribution of deposited energy, thereby revealing the key factors that limit deposition efficiency. Simulations show that for 1000 incident β particles (total energy 17.4 × 10 3 keV), a TCA with a 400‐nm TiO 2 base film, a 1200‐nm truncation height, and no inter‐array gap yields a maximum deposited energy of ∼11.6 × 10 3 keV, corresponding to an absolute deposition efficiency of ∼66.7%. Compared with a planar film, the energy‐deposition efficiency within the effective volume is increased by 7.35%. These results provide essential theoretical support and technical guidance for performance optimization of wide‐bandgap TiO 2 betavoltaic devices.
- 6 February 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 40 (07)
Kinetic study on ZnO nanorod-Cu 2 O quantum dot heterojunctions in high-efficiency betavoltaic cells
To improve the energy-conversion efficiency of betavoltaic cells, we design an energy-conversion unit that couples zinc oxide (ZnO) nanorod arrays (ZNRAs) with cuprous-oxide (Cu 2 O) quantum dots (QDs) and evaluate it under a [ ]Ni source. Monte Carlo particle transport, combined with carrier-transport theory, is used to elucidate how material choices, structural parameters and device geometry govern beta ([ ]-particle energy collection, conversion and electrical output. For the ZNRAs-Cu 2 O architecture, a QD layer thickness of 200[ ]nm maximizes the [ ]-particle energy-transfer depth ([ ]1300[ ]nm), while a 25[ ]nm nanorod spacing provides a practical structural optimization threshold. Owing to its high molecular number density ([ ][ ]cm[ ]), ZnO acts as the principal energy-deposition region (total energy loss [ ]5670[ ]eV). Although the Cu 2 O QDs have a lower molecular number density ([ ][ ]cm[ ]) and a small thickness, they enhance carrier separation through quantum confinement and heterojunction synergy; the built-in field at the Cu 2 O/ZnO interface promotes drift transport. In the optimized structure, reduced defect impact extends carrier lifetime and improves collection efficiency, yielding a short-circuit current density of 0.0287[ ]mA cm[ ] and an open-circuit voltage of 0.447 V. These results reveal the synergistic-gain mechanism across the chain of “energy deposition[ ]carrier transport[ ]electrical conversion,“ providing a quantitative basis for analyzing and optimizing betavoltaic devices.
- 6 February 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 40 (07)
Kinetic study on ZnO nanorod-Cu 2 O quantum dot heterojunctions in high-efficiency betavoltaic cells
To improve the energy-conversion efficiency of betavoltaic cells, we design an energy-conversion unit that couples zinc oxide (ZnO) nanorod arrays (ZNRAs) with cuprous-oxide (Cu 2 O) quantum dots (QDs) and evaluate it under a [ ]Ni source. Monte Carlo particle transport, combined with carrier-transport theory, is used to elucidate how material choices, structural parameters and device geometry govern beta ([ ]-particle energy collection, conversion and electrical output. For the ZNRAs-Cu 2 O architecture, a QD layer thickness of 200[ ]nm maximizes the [ ]-particle energy-transfer depth ([ ]1300[ ]nm), while a 25[ ]nm nanorod spacing provides a practical structural optimization threshold. Owing to its high molecular number density ([ ][ ]cm[ ]), ZnO acts as the principal energy-deposition region (total energy loss [ ]5670[ ]eV). Although the Cu 2 O QDs have a lower molecular number density ([ ][ ]cm[ ]) and a small thickness, they enhance carrier separation through quantum confinement and heterojunction synergy; the built-in field at the Cu 2 O/ZnO interface promotes drift transport. In the optimized structure, reduced defect impact extends carrier lifetime and improves collection efficiency, yielding a short-circuit current density of 0.0287[ ]mA cm[ ] and an open-circuit voltage of 0.447 V. These results reveal the synergistic-gain mechanism across the chain of “energy deposition[ ]carrier transport[ ]electrical conversion,“ providing a quantitative basis for analyzing and optimizing betavoltaic devices.