Xuewei Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Xuewei Xie has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Po-Wan Shum
School of Chemistry and Chemical Engineering, Linyi University, Linyi 276000, China
1 shared publication - Tao Fu
Key Laboratory of Biomedical Information Engineering of Ministry of Education, School of Life Science and Technology, Xi’an Jiaotong University, Xi’an 710049, China
1 shared publication - Woon-Ming Lau
School of Chemistry and Chemical Engineering, Linyi University, Linyi 276000, China
1 shared publication - Yongqiang Fu
School of Material and Automotive Engineering, Qingdao University of Technology, Qingdao 266000, China
1 shared publication
Latest Publications
- Open Access
Enhancement of Corrosion Resistance in 304 Stainless Steel Through Hybrid Parylene C–ALD Al2O3 Composite Coatings
Parylene C films are subjected to inadequate corrosion resistance due to their relatively low adhesion and structural defects. To address this challenge, the CVD Parylene C film (10 μm thick) was composited with Al2O3 film (30 nm thick) prepared with atomic layer deposition (ALD) technology in this work. Optical microscopic results indicate uniform thickness of the films and the reduced adhesion of Parylene C based thick films. SEM-EDX and AFM results show that the composite films have more blurred mounds morphology than the individual films, and Al2O3 film decreases the surface roughness of Parylene C film; compared with the single-layer film, the Ra value of the bilayer film decreased by approximately 6%. XPS, FTIR and XRD analyses confirm the structural components of Al2O3 and Parylene C films and the annealing effect of ALD process on Parylene C film. Tafel polarization and electrochemical impedance spectroscopy tests reveal that the 304-Parylene C–Al2O3 system exhibits the optimal corrosion resistance; its corrosion current density (icorr) is 8.099 × 10−5 μA/cm2 and the ALD Al2O3 thin film uniformly coats the Parylene C film, enhancing its physical barrier and chemical passivation under corrosive conditions.
Open AccessEnhancement of Corrosion Resistance in 304 Stainless Steel Through Hybrid Parylene C–ALD Al2O3 Composite Coatings
Parylene C films are subjected to inadequate corrosion resistance due to their relatively low adhesion and structural defects. To address this challenge, the CVD Parylene C film (10 μm thick) was composited with Al2O3 film (30 nm thick) prepared with atomic layer deposition (ALD) technology in this work. Optical microscopic results indicate uniform thickness of the films and the reduced adhesion of Parylene C based thick films. SEM-EDX and AFM results show that the composite films have more blurred mounds morphology than the individual films, and Al2O3 film decreases the surface roughness of Parylene C film; compared with the single-layer film, the Ra value of the bilayer film decreased by approximately 6%. XPS, FTIR and XRD analyses confirm the structural components of Al2O3 and Parylene C films and the annealing effect of ALD process on Parylene C film. Tafel polarization and electrochemical impedance spectroscopy tests reveal that the 304-Parylene C–Al2O3 system exhibits the optimal corrosion resistance; its corrosion current density (icorr) is 8.099 × 10−5 μA/cm2 and the ALD Al2O3 thin film uniformly coats the Parylene C film, enhancing its physical barrier and chemical passivation under corrosive conditions.