Changshu Pan
Changshu Pan has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
Bangxing Gong
Chongqing Basic Engineering Co., Ltd
1 shared publicationChaoyu Zhang
Chongqing Basic Engineering Co., Ltd
1 shared publicationFanchuan Zhou
Chongqing Basic Engineering Co., Ltd
1 shared publication- Guangde Luo
Chongqing Mineral Resources Development Co., Ltd., Chongqing 401147, China
1 shared publication Guoxing Li
Chongqing Shunxing Geological Exploration Co., Ltd
1 shared publicationJia Ren
Chongqing Nanjiang Survey and Design Co., Ltd
1 shared publication
Latest Publications
- Open Access
Upgrading Quartz-Rich Tailings as Secondary Silica Resources: Process Mineralogy, Beneficiation, Purification, and Product Qualification
Quartz-rich tailings are potential secondary silica resources, but bulk SiO2 content alone does not establish their upgrading potential. Previous comminution, separation, dewatering, and storage modify particle size distributions, mineral liberation, mineral associations, and surface conditions, affecting subsequent beneficiation and purification. This review examines studies published up to September 2026 on quartz-rich tailings and related mineral processing residues, prioritizing actual tailings studies that report feed characteristics, processing conditions, product quality, or recovery. The reviewed results indicate that flowsheet selection depends primarily on how the impurities occur and whether they can be liberated, exposed, or selectively removed. Surface coatings, slimes, and liberated impurity minerals can generally be removed by conventional beneficiation, whereas intergrowths may require controlled liberation followed by appropriate separation. Deep purification is justified only when the residual impurities can be effectively exposed or removed by the selected treatment. Final SiO2 grade is reported more consistently than mass yield, SiO2 recovery, saleable size yield, and impurity deportment, limiting comparisons of overall flowsheet performance. Moreover, high chemical purity alone does not establish suitability for a specific application. The treatment endpoint should therefore be the consistent production of quartz meeting its intended specification at acceptable recovery and within the required product size range, rather than the maximum purity obtained from a small fraction of the tailings.
Open AccessUpgrading Quartz-Rich Tailings as Secondary Silica Resources: Process Mineralogy, Beneficiation, Purification, and Product Qualification
Quartz-rich tailings are potential secondary silica resources, but bulk SiO2 content alone does not establish their upgrading potential. Previous comminution, separation, dewatering, and storage modify particle size distributions, mineral liberation, mineral associations, and surface conditions, affecting subsequent beneficiation and purification. This review examines studies published up to September 2026 on quartz-rich tailings and related mineral processing residues, prioritizing actual tailings studies that report feed characteristics, processing conditions, product quality, or recovery. The reviewed results indicate that flowsheet selection depends primarily on how the impurities occur and whether they can be liberated, exposed, or selectively removed. Surface coatings, slimes, and liberated impurity minerals can generally be removed by conventional beneficiation, whereas intergrowths may require controlled liberation followed by appropriate separation. Deep purification is justified only when the residual impurities can be effectively exposed or removed by the selected treatment. Final SiO2 grade is reported more consistently than mass yield, SiO2 recovery, saleable size yield, and impurity deportment, limiting comparisons of overall flowsheet performance. Moreover, high chemical purity alone does not establish suitability for a specific application. The treatment endpoint should therefore be the consistent production of quartz meeting its intended specification at acceptable recovery and within the required product size range, rather than the maximum purity obtained from a small fraction of the tailings.
- Open Access
- 11 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (7) , 12494-12508
Study on Multifactor Regulation Mechanism and Priority of Gas Desorption in Soft Coal
Under the background of global energy low-carbon transformation, coalbed methane (CBM) reserves in soft coal-rich areas such as China’s Shanxi Qinshui Basin account for over 30% of the national total, yet the extraction efficiency has long been below 35%. The core bottleneck lies in insufficient understanding of the mechanisms by which multiple factors (e.g., temperature, moisture content, particle size, and initial pressure) regulate gas desorption, coupled with the lack of quantitative comparison and priority ranking. Taking soft coal from a coal mine in Shanxi Province, China, as the research object, this study conducted 16 groups of single-factor experiments (temperature: 10–40 °C, moisture content: 2%–8%, particle size: 0.3–4.0 mm, initial pressure: 1–4 MPa). Combined with high-precision monitoring and a quantitative evaluation system of “curve separation degree-peak rate range-attenuation constant range”, the regulation laws, mechanisms, and priority order were revealed. Results show that initial pressure is the absolute dominant factor: the cumulative desorption amount at 4 MPa is 5.5 times that at 1 MPa, with a 6-fold difference in peak desorption rate. It determines gas reserves and desorption driving force through Langmuir adsorption equilibrium and pressure difference. Moisture content is a key inhibitory factor: the desorption amount at 8% decreases by 68.55% compared to 2%, showing a sharp decline in the 2%–4% range and a slow decline in the 4%–8% range, attributed to pore blockage and adsorption competition. Temperature is an auxiliary promoting factor: the desorption amount at 40 °C increases by 40% compared to 10 °C, regulating desorption by breaking adsorption equilibrium via Le Chatelier’s principle and accelerating molecular thermal motion, but is constrained by moisture content. Particle size has the weakest impact: the difference in final desorption amount between coal samples of 0.3–0.5 mm and 2.0–4.0 mm is less than 5%, only assisting in regulating the initial rate. Quantitative comparison establishes the priority order: initial pressure > moisture content > temperature > particle size. This study fills the gap in quantitative comparison of multifactor effects, provides support for precise gas control strategies of ″pre-extraction pressure control-drainage dehumidification-temperature control assistance-local coal fragmentation”, and is of great significance for improving CBM development efficiency and preventing gas disasters.
- 11 February 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (7) , 12494-12508
Open AccessStudy on Multifactor Regulation Mechanism and Priority of Gas Desorption in Soft Coal
Under the background of global energy low-carbon transformation, coalbed methane (CBM) reserves in soft coal-rich areas such as China’s Shanxi Qinshui Basin account for over 30% of the national total, yet the extraction efficiency has long been below 35%. The core bottleneck lies in insufficient understanding of the mechanisms by which multiple factors (e.g., temperature, moisture content, particle size, and initial pressure) regulate gas desorption, coupled with the lack of quantitative comparison and priority ranking. Taking soft coal from a coal mine in Shanxi Province, China, as the research object, this study conducted 16 groups of single-factor experiments (temperature: 10–40 °C, moisture content: 2%–8%, particle size: 0.3–4.0 mm, initial pressure: 1–4 MPa). Combined with high-precision monitoring and a quantitative evaluation system of “curve separation degree-peak rate range-attenuation constant range”, the regulation laws, mechanisms, and priority order were revealed. Results show that initial pressure is the absolute dominant factor: the cumulative desorption amount at 4 MPa is 5.5 times that at 1 MPa, with a 6-fold difference in peak desorption rate. It determines gas reserves and desorption driving force through Langmuir adsorption equilibrium and pressure difference. Moisture content is a key inhibitory factor: the desorption amount at 8% decreases by 68.55% compared to 2%, showing a sharp decline in the 2%–4% range and a slow decline in the 4%–8% range, attributed to pore blockage and adsorption competition. Temperature is an auxiliary promoting factor: the desorption amount at 40 °C increases by 40% compared to 10 °C, regulating desorption by breaking adsorption equilibrium via Le Chatelier’s principle and accelerating molecular thermal motion, but is constrained by moisture content. Particle size has the weakest impact: the difference in final desorption amount between coal samples of 0.3–0.5 mm and 2.0–4.0 mm is less than 5%, only assisting in regulating the initial rate. Quantitative comparison establishes the priority order: initial pressure > moisture content > temperature > particle size. This study fills the gap in quantitative comparison of multifactor effects, provides support for precise gas control strategies of ″pre-extraction pressure control-drainage dehumidification-temperature control assistance-local coal fragmentation”, and is of great significance for improving CBM development efficiency and preventing gas disasters.