Keita Tanahashi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Keita Tanahashi has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Melbert Jeem
Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628, Japan
5 shared publications - Takahiro Nomura
Faculty of Engineering, Hokkaido University
5 shared publications Tomokazu Nakamura
5 shared publications- Joshua Chidiebere Mba
Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628, Japan
3 shared publications - Yuto Shimizu
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, 2-1-1, Katahira, Aoba-ku, Sendai, Miyagi 980-8577, Japan
3 shared publications Minako Kondo
2 shared publications
Latest Publications
- Open Access
- 15 October 2026
- Published by Elsevier in SSRN Electronic Journal
Linking Oxidation Treatment to Interfacial Structure and 1000-Cycle Durability in Dry-Coated Al–Cu–Si Microencapsulated Phase Change Materials
Al–Cu–Si eutectic alloys store 350–420 J g-1 near 520 °C but must be encapsulated to survive melting in air. Dry-coated microencapsulated phase change materials (MEPCMs) are made by high-speed impact blending (HIB) of α-Al2O3 nanoparticles onto the alloy powder and completed by heat oxidation, which builds the shell but consumes Al from the core. However, how the temperature and duration of this step affect the stability of the shell has not been reported in detail for Al–Cu–Si MEPCMs. Here, we oxidize dry-coated Al–26.5Cu–5.4Si@α-Al2O3 MEPCMs in O2 at 950–1200 °C and cycle them 1000 times in air. Rietveld refinement detects α-Al2O3 as the only crystalline oxidation product, and its growth gives an O uptake of 5.7–24.0 wt%. Oxidation at 1000 °C for 6 h gives 7.6 wt% O and a dense α-Al2O3 layer of 0.55–0.59 µm beneath the coat, consistent with the 0.68 µm expected from the O uptake. Up to 7.6 wt% O the Cu-enriched core stores 391–399 J g-1 of metal, and without a nucleating additive its main freezing peak lies 13 K above that of the HIB MEPCMs. At 14.6 wt% O and above, a primary phase crystallizes before the eutectic and the latent heat falls. During cycling the HIB MEPCMs form 20.0 wt% γ-Al2O3 and keep 57% of their latent heat or 76% per gram of metal, against 86–104% or 95–104% for the pre-oxidized MEPCMs. MEPCMs oxidized at 1000 °C for 6 h keep 243 J g-1 after 1000 cycles with an unchanged main freezing peak.
- 15 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLinking Oxidation Treatment to Interfacial Structure and 1000-Cycle Durability in Dry-Coated Al–Cu–Si Microencapsulated Phase Change Materials
Al–Cu–Si eutectic alloys store 350–420 J g-1 near 520 °C but must be encapsulated to survive melting in air. Dry-coated microencapsulated phase change materials (MEPCMs) are made by high-speed impact blending (HIB) of α-Al2O3 nanoparticles onto the alloy powder and completed by heat oxidation, which builds the shell but consumes Al from the core. However, how the temperature and duration of this step affect the stability of the shell has not been reported in detail for Al–Cu–Si MEPCMs. Here, we oxidize dry-coated Al–26.5Cu–5.4Si@α-Al2O3 MEPCMs in O2 at 950–1200 °C and cycle them 1000 times in air. Rietveld refinement detects α-Al2O3 as the only crystalline oxidation product, and its growth gives an O uptake of 5.7–24.0 wt%. Oxidation at 1000 °C for 6 h gives 7.6 wt% O and a dense α-Al2O3 layer of 0.55–0.59 µm beneath the coat, consistent with the 0.68 µm expected from the O uptake. Up to 7.6 wt% O the Cu-enriched core stores 391–399 J g-1 of metal, and without a nucleating additive its main freezing peak lies 13 K above that of the HIB MEPCMs. At 14.6 wt% O and above, a primary phase crystallizes before the eutectic and the latent heat falls. During cycling the HIB MEPCMs form 20.0 wt% γ-Al2O3 and keep 57% of their latent heat or 76% per gram of metal, against 86–104% or 95–104% for the pre-oxidized MEPCMs. MEPCMs oxidized at 1000 °C for 6 h keep 243 J g-1 after 1000 cycles with an unchanged main freezing peak.
- Open Access
- 25 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (39)
Third-generation ultralong-term latent heat storage glass based on a sugar alcohol mixture
Long-term thermal storage can decarbonize heat utilization by resolving mismatches between heat supply and demand. However, common heat storage materials cannot store energy for long periods. Here, we report an ultralong-term latent heat storage “glass” based on a ternary eutectic sugar alcohol mixture. The as-prepared material exhibits a solid–liquid phase change and glass transition at 423 and 289 K, respectively, with heat release via cold crystallization at 346 K. Remarkably, the glass transition temperature increases to 313 K after aging at ambient temperature for 12 hours due to structural relaxation. This phase change material (PCM) conserves the latent heat of fusion at 423 K for at least 180 days in the glass state at ambient temperature. These results establish a third-generation latent heat storage mode, retaining the charged state as a kinetically arrested amorphous solid and thereby fundamentally shifting the stability criterion from supercooled-liquid nucleation suppression to glass-transition and structural-relaxation kinetics.
- 25 September 2026
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 12 (39)
Open AccessThird-generation ultralong-term latent heat storage glass based on a sugar alcohol mixture
Long-term thermal storage can decarbonize heat utilization by resolving mismatches between heat supply and demand. However, common heat storage materials cannot store energy for long periods. Here, we report an ultralong-term latent heat storage “glass” based on a ternary eutectic sugar alcohol mixture. The as-prepared material exhibits a solid–liquid phase change and glass transition at 423 and 289 K, respectively, with heat release via cold crystallization at 346 K. Remarkably, the glass transition temperature increases to 313 K after aging at ambient temperature for 12 hours due to structural relaxation. This phase change material (PCM) conserves the latent heat of fusion at 423 K for at least 180 days in the glass state at ambient temperature. These results establish a third-generation latent heat storage mode, retaining the charged state as a kinetically arrested amorphous solid and thereby fundamentally shifting the stability criterion from supercooled-liquid nucleation suppression to glass-transition and structural-relaxation kinetics.
- 30 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (9) , 4580-4590
Kinetic Enhancement of Oxygen Storage in Ca 2 AlMnO 5+δ via Yttrium-Induced Thermodynamic Tuning
- 30 April 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (9) , 4580-4590
Kinetic Enhancement of Oxygen Storage in Ca 2 AlMnO 5+δ via Yttrium-Induced Thermodynamic Tuning
- 16 February 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (8) , 3784-3791
Mechanical Microencapsulation and Shell Formation Mechanism of High Working Temperature Al-25Si Alloy Phase Change Material
- 16 February 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (8) , 3784-3791
Mechanical Microencapsulation and Shell Formation Mechanism of High Working Temperature Al-25Si Alloy Phase Change Material